Its Mine the World Famous 67 Dragtruck - Page 35 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

djracer · 07-14-2011, 10:45 PM

Actually I got two boxes from S&W but the main one I wanted was back ordered. Grrrrrr. When I ordered it they didn't say it was back ordered.

Rongway68 · 07-17-2011, 09:08 PM

How far Back has the motor been set?

djracer · 07-17-2011, 11:17 PM

The firewall is barely notched to clear mid plate.

C20-67_N_MO · 07-19-2011, 05:02 PM

WOW!

Just read the entire thread.

And it's great to read over what has happend to your truck over the years. Hoping you get it back running soon and enjoy it as well.

Any closer on getting it running?

djracer · 07-19-2011, 07:26 PM

Dang brother that was allot of reading. Its at the chassis shop then I plan to take it to the paint shop. It will probably be a spring debut. I'm trying to get my son's (Djjr) truck running by the end of next month.

djracer · 09-04-2011, 10:34 AM

I dropped by the chassis shop and took a few pictures.

noonzor · 09-04-2011, 11:45 AM

Schweeeeet. Good use of speed networks money!
Posted via Mobile Device

djracer · 09-12-2011, 09:57 PM

Quote:

Originally Posted by noonzor

Schweeeeet. Good use of speed networks money!
Posted via Mobile Device

Thanks Brother.

djracer · 10-02-2011, 07:11 PM

Ok I am gonna relink the pictures from above.

djracer · 10-02-2011, 07:14 PM

Getting close to being done at the chassis shop.

Parachute mount and it removable.

djracer · 10-02-2011, 07:18 PM

New Fuel Cell and Dual Battery Mount.

Fuel Cell Straps fit like crap. I will have to rebend them or remake them.

noonzor · 10-02-2011, 07:22 PM

Brett Wagner: "whats the parachute mean?"

Contestant: "Means its fast!"

djracer · 10-02-2011, 07:23 PM

Anti Roll Bar. I am not real sure about the bars being at an angle but it wouldn't be real hard to change if it causes a problem. The Chassis guy says the are fine.

djracer · 10-02-2011, 07:25 PM

Quote:

Originally Posted by noonzor

Brett Wagner: "whats the parachute mean?"

Contestant: "Means its fast!"

I hope its fast!

noonzor · 10-02-2011, 07:32 PM

well.... it was fast before you did all this. dont see why it wouldnt be fast when you put it back together bigger badder and hornier! haha

ive got faith in you kevin!

68 C-10 KID · 10-02-2011, 09:59 PM

Looking good Kevin!
Keep those updates coming.
Is there plans for the motor to hit the dyno before it goes in?

wutnxt · 10-02-2011, 10:09 PM

ET without Nos is
6.44 1/8 @ 104.13
10.39 1/4 @ 125.83

Nos Times
5.785 1/8 @ 118.65 with a 1.336 60ft
9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

I was just looking at your times.....Thats moving....what tires are you running for that and what kinda of HP are you making before Nos ?

djracer · 10-02-2011, 10:27 PM

Quote:

Originally Posted by 68 C-10 KID

Looking good Kevin!
Keep those updates coming.
Is there plans for the motor to hit the dyno before it goes in?

I'll dyno it on the track. The motor should make around 900hp and I'm gonna spray the heck out of it.

djracer · 10-02-2011, 10:31 PM

Quote:

Originally Posted by wutnxt

I was just looking at your times.....Thats moving....what tires are you running for that and what kinda of HP are you making before Nos ?

Those time were run with a 33 10.5w tire but it was on way too narrow of a wheel. The old motor should have made 700 or so HP. Click the link in my sig to see my fastest pass with the old combo.

dbmx66 · 10-03-2011, 02:54 AM

wheres the pro mod wing and and dual shoot launcher and the 80inch wheelie bars at?

haha im kidding but the work is looking great. im sure itll haul some serious ass when its done. (not that it didnt already) but im sure you get my point haha

djracer · 10-03-2011, 06:57 AM

Quote:

Originally Posted by dbmx66

wheres the pro mod wing and and dual shoot launcher and the 80inch wheelie bars at?

haha im kidding but the work is looking great. im sure itll haul some serious ass when its done. (not that it didnt already) but im sure you get my point haha

You can't sneak up on anyone with all that stuff. That's one reason the chute mount is removable. I may slip it of and put a tag on it and drive it on the street sometimes. It didn't need wheelie bars at all with the old motor so we will have to see if that remains the same. I hate the cars and trucks that look like they should run in the 4's and only run in the sixes in the eighth mile.

dbmx66 · 10-03-2011, 11:45 AM

Quote:

Originally Posted by djracer

You can't sneak up on anyone with all that stuff. That's one reason the chute mount is removable. I may slip it of and put a tag on it and drive it on the street sometimes. It didn't need wheelie bars at all with the old motor so we will have to see if that remains the same. I hate the cars and trucks that look like they should run in the 4's and only run in the sixes in the eighth mile.

yea i agree, its better to look slower and be faster then to look faster and be slower.

shawnt · 10-03-2011, 01:39 PM

Looking good Kevin!

How wide of a wheel were you runnin with the 10.5W's?
Posted via Mobile Device

djracer · 10-03-2011, 07:56 PM

I was running them on the 10 inch wheels that were on the truck when I got it and now I went up to a 16 inch diameter and to a 14 inch width.

wutnxt · 10-03-2011, 08:04 PM

Quote:

Originally Posted by djracer

Those time were run with a 33 10.5w tire but it was on way too narrow of a wheel. The old motor should have made 700 or so HP. Click the link in my sig to see my fastest pass with the old combo.

=================================================
Thanks for the information ....Thats hooking up pretty well and moving...You have done a great job. There aren't many trucks that will run those kinds of times....

07-14-2011, 10:45 PM	#851
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck Actually I got two boxes from S&W but the main one I wanted was back ordered. Grrrrrr. When I ordered it they didn't say it was back ordered. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

07-17-2011, 09:08 PM	#852
Rongway68 Registered User Join Date: Feb 2011 Location: San Leon,Tx Posts: 55	Re: Its Mine the World Famous 67 Dragtruck How far Back has the motor been set?

07-17-2011, 11:17 PM	#853
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck The firewall is barely notched to clear mid plate. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

07-19-2011, 05:02 PM	#854
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: Its Mine the World Famous 67 Dragtruck WOW! Just read the entire thread. And it's great to read over what has happend to your truck over the years. Hoping you get it back running soon and enjoy it as well. Any closer on getting it running? __________________ Coming Soon: Project 1970 Country Truck

07-19-2011, 07:26 PM	#855
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck Dang brother that was allot of reading. Its at the chassis shop then I plan to take it to the paint shop. It will probably be a spring debut. I'm trying to get my son's (Djjr) truck running by the end of next month. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-04-2011, 10:34 AM	#856
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck I dropped by the chassis shop and took a few pictures. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-04-2011, 11:45 AM	#857
noonzor Registered User Join Date: Aug 2009 Location: Edmonton, Alberta Posts: 818	Re: Its Mine the World Famous 67 Dragtruck Schweeeeet. Good use of speed networks money! Posted via Mobile Device __________________ 69 c10 Shortbox Build http://67-72chevytrucks.com/vboard/s...d.php?t=360622

10-02-2011, 07:11 PM	#859
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck Ok I am gonna relink the pictures from above. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

10-02-2011, 07:14 PM	#860
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck Getting close to being done at the chassis shop. Parachute mount and it removable. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

10-02-2011, 07:18 PM	#861
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck New Fuel Cell and Dual Battery Mount. Fuel Cell Straps fit like crap. I will have to rebend them or remake them. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

10-02-2011, 07:22 PM	#862
noonzor Registered User Join Date: Aug 2009 Location: Edmonton, Alberta Posts: 818	Re: Its Mine the World Famous 67 Dragtruck Brett Wagner: "whats the parachute mean?" Contestant: "Means its fast!" __________________ 69 c10 Shortbox Build http://67-72chevytrucks.com/vboard/s...d.php?t=360622

10-02-2011, 07:23 PM	#863
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck Anti Roll Bar. I am not real sure about the bars being at an angle but it wouldn't be real hard to change if it causes a problem. The Chassis guy says the are fine. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

10-02-2011, 07:32 PM	#865
noonzor Registered User Join Date: Aug 2009 Location: Edmonton, Alberta Posts: 818	Re: Its Mine the World Famous 67 Dragtruck well.... it was fast before you did all this. dont see why it wouldnt be fast when you put it back together bigger badder and hornier! haha ive got faith in you kevin! __________________ 69 c10 Shortbox Build http://67-72chevytrucks.com/vboard/s...d.php?t=360622

10-02-2011, 09:59 PM	#866
68 C-10 KID Mean Green Join Date: Sep 2007 Location: Portland, OR Posts: 522	Re: Its Mine the World Famous 67 Dragtruck Looking good Kevin! Keep those updates coming. Is there plans for the motor to hit the dyno before it goes in? __________________ 427 SBC 683HP & 590ftlbsTRQ @ fly wheel. 60'-1.38 1/4-10.43 MPH-124.6 New ET current 4/2019 AKA MEAN GREEN.

10-02-2011, 10:09 PM	#867
wutnxt Registered User Join Date: Dec 2009 Location: vancouver b.c....is the biggest place most people would know but I am actually out in the valley 45 mins away Posts: 2,050	Re: Its Mine the World Famous 67 Dragtruck ET without Nos is 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nos Times 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole! I was just looking at your times.....Thats moving....what tires are you running for that and what kinda of HP are you making before Nos ? __________________ 1966 Pro street build http://67-72chevytrucks.com/vboard/s...?t=448089[ 1958 LS 2 build http://67-72chevytrucks.com/vboard/s...d.php?t=527123 1966 SBFS low and go http://67-72chevytrucks.com/vboard/s....php?p=5799909 1966 SBFS street HULK http://67-72chevytrucks.com/vboard/s...=1#post5886625 Poject Low and go gets a 6.2 ltr LSA supercharged with 6 speed automatic Aluinum Radiator Dealer pm for details



Register or Log In To remove these advertisements.

10-03-2011, 02:54 AM	#870
dbmx66 Registered User Join Date: Aug 2009 Location: PA Posts: 883	Re: Its Mine the World Famous 67 Dragtruck wheres the pro mod wing and and dual shoot launcher and the 80inch wheelie bars at? haha im kidding but the work is looking great. im sure itll haul some serious ass when its done. (not that it didnt already) but im sure you get my point haha

10-03-2011, 01:39 PM	#873
shawnt Registered User Join Date: Sep 2008 Location: sulphur springs texas Posts: 141	Re: Its Mine the World Famous 67 Dragtruck Looking good Kevin! How wide of a wheel were you runnin with the 10.5W's? Posted via Mobile Device __________________ Shawn 85 SWB 7.39 @ 93 Best so far with 0 tuning Lesson in life: Never fry bacon naked!

10-03-2011, 07:56 PM	#874
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck I was running them on the 10 inch wheels that were on the truck when I got it and now I went up to a 16 inch diameter and to a 14 inch width. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

Register or Log In To remove these advertisements.