How about some pics of 2wd Blazers, Jimmy's & Burbs? - Page 35 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mr Pops · 01-07-2013, 12:03 AM

Here's one of Google stalking me at work..

Mr Pops · 01-07-2013, 01:51 AM

Figured out how to adjust the angle too!

mrblalock66 · 01-21-2013, 09:02 PM

48 GMC BURB · 02-04-2013, 07:10 AM

It's a Blazer chassis, 1974 P 10 that actually makes money

blckbety80 · 02-18-2013, 03:02 PM

anyone got pics of the interior rear section of bagged blazers showing the notch and floor area? I have a few ideas just was wondering what all was out there so I dont follow too close to the average JOE... any pics will be greatly appreciated!

Mr Pops · 02-18-2013, 05:37 PM

Quote:

Originally Posted by blckbety80

anyone got pics of the interior rear section of bagged blazers showing the notch and floor area? I have a few ideas just was wondering what all was out there so I dont follow too close to the average JOE... any pics will be greatly appreciated!

Here's my 76 Blazer with 6" of notch. Just enough to keep the back seat bolted into it's front brackets. The back of the seat sits about an inch or so higher than stock. Using stock inner wheelwells that are just moved up a few inches. I wanted the seatbelts to bolt into a crossmember, so I used some out of a 80's chevy fullsize van since they were the only ones long enough to reach back that far.

blckbety80 · 02-21-2013, 01:28 PM

Thanks POPS! I just picked up a 2wd 80' and I got it in pieces... The guy had a bit of bad luck and had to part with it. The frame is partially bagged and the body sits on a stand. No front clip or motor or trans. Im going to finish up the frame first to get the body back on it then go from there.

falze · 02-21-2013, 05:19 PM

Just a question now that i see ur floor, when did they put the little step in the floor that is rite in front of the rear seat??

motornut · 02-21-2013, 05:37 PM

Quote:

Originally Posted by falze

Just a question now that i see ur floor, when did they put the little step in the floor that is rite in front of the rear seat??

78 they down some for leg room

7071Bluck · 02-21-2013, 10:49 PM

My 91 burb that I just picked up. Its monoleaged with bag over axel in rear and 2 inch spindles and bags up front

BIG V · 02-22-2013, 11:37 PM

Quote:

Originally Posted by 7071Bluck

My 91 burb that I just picked up. Its monoleaged with bag over axel in rear and 2 inch spindles and bags up front

Love that stance
Posted via Mobile Device

91Subbed · 02-22-2013, 11:52 PM

Quote:

Originally Posted by 7071Bluck

My 91 burb that I just picked up. Its monoleaged with bag over axel in rear and 2 inch spindles and bags up front

What else is on the rear? A flip kit? Leafs removed from spring pack?
Posted via Mobile Device

7071Bluck · 02-23-2013, 12:57 AM

The spring has been flipped and all leaves removed except main one

91Subbed · 02-23-2013, 01:01 AM

Does it bounce alot or does the bags over axle help with that?
Posted via Mobile Device

7071Bluck · 02-23-2013, 01:05 AM

No the rear doesnt bounce at all, the leaves limit the lift of the bags. It only gets about 2 inches of lift in the rear

73Blown468 · 03-20-2013, 04:15 PM

Posted via Mobile Device

Here is my 2Wd 1973 Blown 468 BBC blazer 650+ hp @ 5 pounds ,has a big traction issue haha
Posted via Mobile Device

73Blown468 · 03-20-2013, 04:20 PM

Posted via Mobile Device
Posted via Mobile Device

elwoods76 · 03-21-2013, 12:43 PM

That is a great lookin Blazer!! And I like your top for it too!

motornut · 03-21-2013, 12:46 PM

Quote:

Originally Posted by 73Blown468

Posted via Mobile Device

Here is my 2Wd 1973 Blown 468 BBC blazer 650+ hp @ 5 pounds ,has a big traction issue haha
Posted via Mobile Device

lol @ "traction issue" lol nice !

73Blown468 · 03-21-2013, 02:27 PM

Quote:

Originally Posted by elwoods76

That is a great lookin Blazer!! And I like your top for it too!

Thankyou , the top is another one of my favourite pieces on the truck , the almighty chevy Bowie for the rear window
Posted via Mobile Device

73Blown468 · 03-21-2013, 03:08 PM

Posted via Mobile Device

Here's a poor shot of the rear with the top
Posted via Mobile Device

mgchevyparts · 03-24-2013, 09:21 PM

Just picked up a orig 75 2wd Jimmy for cheap. Posted on the 73up truck side as I didn't see this section. I just removed the running boards and mud flaps today, tested the paint, it'll clean up and shine ok for a driver. No dents, never and just one very small rust spot on lower driver door corner, about 3/4" long line.

ol'blazer · 03-24-2013, 11:25 PM

Quote:

Originally Posted by mgchevyparts

Just picked up a orig 75 2wd Jimmy for cheap. Posted on the 73up truck side as I didn't see this section. I just removed the running boards and mud flaps today, tested the paint, it'll clean up and shine ok for a driver. No dents, never and just one very small rust spot on lower driver door corner, about 3/4" long line.

looks solid! should be a fun project

mgchevyparts · 03-24-2013, 11:32 PM

I'm amazed how solid and rust free it is. It was parked for the past 7 yrs since the owner passed. No rust under or anywhere other then the one very small spot on door. Never even dented, a few dings but that's it. The interior is in bad shape, I'll replace the entire interior and probably rebuild engine, I'll clean the paint and drive it, oh yea it'll get lowered with new Ridler 18" wheels too.

mgchevyparts · 03-31-2013, 05:07 PM

Found some rust when I removed the top, a little on the pass side between the top and the bed.

01-07-2013, 12:03 AM	#851
Mr Pops Ridin' Dirty Join Date: Oct 2009 Location: Ardrossan Alberta Canada Posts: 2,193	Re: How about some pics of 2wd Blazers, Jimmy's & Burbs? Here's one of Google stalking me at work.. Attached Images __________________ 1978 C3500 Crewcab (Project) 1979 C2500 Crewcab (Driver/project) 1988 R2500 Crewcab (Driver) 1988 V3500 Crewcab 1988 R2500 Crewcab (Mint, Ex Fire Dept) 1968 Chev Suburban (4x4 conversion) LINK 1970 Chev C20 Suburban (driver/cruiser)LINK 2005 Impala (Incognito vehicle) 2004 Yukon XL Denali (Kid hauler) 1947 Case tractor Facebook Page(1000's of pictures of GM cars and trucks organized into albums) YouTube Channel

01-07-2013, 01:51 AM	#852
Mr Pops Ridin' Dirty Join Date: Oct 2009 Location: Ardrossan Alberta Canada Posts: 2,193	Re: How about some pics of 2wd Blazers, Jimmy's & Burbs? Figured out how to adjust the angle too! Attached Images __________________ 1978 C3500 Crewcab (Project) 1979 C2500 Crewcab (Driver/project) 1988 R2500 Crewcab (Driver) 1988 V3500 Crewcab 1988 R2500 Crewcab (Mint, Ex Fire Dept) 1968 Chev Suburban (4x4 conversion) LINK 1970 Chev C20 Suburban (driver/cruiser)LINK 2005 Impala (Incognito vehicle) 2004 Yukon XL Denali (Kid hauler) 1947 Case tractor Facebook Page(1000's of pictures of GM cars and trucks organized into albums) YouTube Channel

01-21-2013, 09:02 PM	#853
mrblalock66 Registered User Join Date: Jul 2011 Location: Houston, Texas Posts: 297	Re: How about some pics of 2wd Blazers, Jimmy's & Burbs?

02-04-2013, 07:10 AM	#854
48 GMC BURB Registered User Join Date: Feb 2011 Location: Annapolis MD Posts: 183	Re: How about some pics of 2wd Blazers, Jimmy's & Burbs? It's a Blazer chassis, 1974 P 10 that actually makes money Attached Images __________________ 48 GMC Burb 51 Chevy AD 3100/C 4 byShannon 74 Chevy P 10 48 Double Duty 04 SS Burb 01 Springer HD

02-18-2013, 03:02 PM	#855
blckbety80 Registered User Join Date: Jul 2012 Location: LBK,TX Posts: 14	Re: How about some pics of 2wd Blazers, Jimmy's & Burbs? anyone got pics of the interior rear section of bagged blazers showing the notch and floor area? I have a few ideas just was wondering what all was out there so I dont follow too close to the average JOE... any pics will be greatly appreciated!

02-21-2013, 01:28 PM	#857
blckbety80 Registered User Join Date: Jul 2012 Location: LBK,TX Posts: 14	Re: How about some pics of 2wd Blazers, Jimmy's & Burbs? Thanks POPS! I just picked up a 2wd 80' and I got it in pieces... The guy had a bit of bad luck and had to part with it. The frame is partially bagged and the body sits on a stand. No front clip or motor or trans. Im going to finish up the frame first to get the body back on it then go from there.

02-21-2013, 05:19 PM	#858
falze Registered User Join Date: Oct 2008 Location: Streator, Il Posts: 73	Re: How about some pics of 2wd Blazers, Jimmy's & Burbs? Just a question now that i see ur floor, when did they put the little step in the floor that is rite in front of the rear seat??

02-21-2013, 10:49 PM	#860
7071Bluck Registered User Join Date: Jul 2006 Location: Missouri Posts: 60	Re: How about some pics of 2wd Blazers, Jimmy's & Burbs? My 91 burb that I just picked up. Its monoleaged with bag over axel in rear and 2 inch spindles and bags up front Attached Images

02-23-2013, 12:57 AM	#863
7071Bluck Registered User Join Date: Jul 2006 Location: Missouri Posts: 60	Re: How about some pics of 2wd Blazers, Jimmy's & Burbs? The spring has been flipped and all leaves removed except main one

02-23-2013, 01:01 AM	#864
91Subbed Registered User Join Date: Dec 2011 Location: Arlington Tx Posts: 182	Re: How about some pics of 2wd Blazers, Jimmy's & Burbs? Does it bounce alot or does the bags over axle help with that? Posted via Mobile Device

02-23-2013, 01:05 AM	#865
7071Bluck Registered User Join Date: Jul 2006 Location: Missouri Posts: 60	Re: How about some pics of 2wd Blazers, Jimmy's & Burbs? No the rear doesnt bounce at all, the leaves limit the lift of the bags. It only gets about 2 inches of lift in the rear

03-20-2013, 04:15 PM	#866
73Blown468 Registered User Join Date: Mar 2013 Location: Vernon BC Posts: 16	Re: How about some pics of 2wd Blazers, Jimmy's & Burbs? Posted via Mobile Device Here is my 2Wd 1973 Blown 468 BBC blazer 650+ hp @ 5 pounds ,has a big traction issue haha Posted via Mobile Device Attached Images

03-20-2013, 04:20 PM	#867
73Blown468 Registered User Join Date: Mar 2013 Location: Vernon BC Posts: 16	Re: How about some pics of 2wd Blazers, Jimmy's & Burbs? Posted via Mobile Device Posted via Mobile Device Attached Images

03-21-2013, 12:43 PM	#868
elwoods76 Just Cruizin Join Date: Jun 2008 Location: Pleasant Grove,Utah Posts: 154	Re: How about some pics of 2wd Blazers, Jimmy's & Burbs? That is a great lookin Blazer!! And I like your top for it too!

03-21-2013, 03:08 PM	#871
73Blown468 Registered User Join Date: Mar 2013 Location: Vernon BC Posts: 16	Re: How about some pics of 2wd Blazers, Jimmy's & Burbs? Posted via Mobile Device Here's a poor shot of the rear with the top Posted via Mobile Device Attached Images __________________ 1973 2wd Blazer ,Weiand 177 prostreet supercharger, 468bbc 650hp @5 pounds ,Hughes transmission , strange axles ,323 gears...traction big issue 2012 black Ram Longhorn edition,Banks ram air intake,H&S Mini Maxx race tuner DPF/EGR delete kit not installed



Register or Log In To remove these advertisements.

03-24-2013, 09:21 PM	#872
mgchevyparts Registered User Join Date: Feb 2013 Location: Upland, Calif Posts: 698	Re: How about some pics of 2wd Blazers, Jimmy's & Burbs? Just picked up a orig 75 2wd Jimmy for cheap. Posted on the 73up truck side as I didn't see this section. I just removed the running boards and mud flaps today, tested the paint, it'll clean up and shine ok for a driver. No dents, never and just one very small rust spot on lower driver door corner, about 3/4" long line. Attached Images

03-24-2013, 11:32 PM	#874
mgchevyparts Registered User Join Date: Feb 2013 Location: Upland, Calif Posts: 698	Re: How about some pics of 2wd Blazers, Jimmy's & Burbs? I'm amazed how solid and rust free it is. It was parked for the past 7 yrs since the owner passed. No rust under or anywhere other then the one very small spot on door. Never even dented, a few dings but that's it. The interior is in bad shape, I'll replace the entire interior and probably rebuild engine, I'll clean the paint and drive it, oh yea it'll get lowered with new Ridler 18" wheels too.

03-31-2013, 05:07 PM	#875
mgchevyparts Registered User Join Date: Feb 2013 Location: Upland, Calif Posts: 698	Re: How about some pics of 2wd Blazers, Jimmy's & Burbs? Found some rust when I removed the top, a little on the pass side between the top and the bed. Attached Images

Register or Log In To remove these advertisements.