1967 Chevy CST aka "the loud truck" - Page 35 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67chevy1series · 03-14-2013, 02:25 PM

Quote:

Originally Posted by NewType72

Man there's something bout a classic lookin motor that's killer
Posted via Mobile Device

Right!? There just so classy. And for a piece of equipment that was never ment to have style, class or good looks and was just supposed to work all day every day. These old orange small black actually look good. They have there own body lines and stuff, There awesome!

Quote:

Originally Posted by Ol Blue K20

Yup, but I'm waiting to see this thing in and running, I want to hear it at Goodguys

hint..hint

You and me both buddy! Hopefully I can get it in an get any kinks worked out during the following week and then by the time the weekend comes will be smooth sailing. I'm gonna try and clean the engine bay and make it look actually presentable lol
Posted via Mobile Device

shawno72 · 03-14-2013, 02:44 PM

Way to go Rick!! Engine is looking killer. Hey Dale so you are gonna make it out to GG's I take it.

**Ol Blue K20** · 03-14-2013, 03:50 PM

Quote:

Originally Posted by shawno72

Way to go Rick!! Engine is looking killer. Hey Dale so you are gonna make it out to GG's I take it.

I normally go for the swap meet and then wander through the show, but I may hang out a while this time

jbclassix · 03-14-2013, 08:11 PM

Rick!!! get rid of those rubber strips of intake leakers, then run a bead of "Right Stuff" silicone front and back. Then let it cure for atleast 12 hours before running it!

**Ol Blue K20** · 03-15-2013, 02:17 AM

Posted via Mobile DeviceRick, you're being a little on the quiet side. hope it's cause youre busy.
Posted via Mobile Device

shawno72 · 03-15-2013, 07:15 AM

Yep we're gonna have to keep his thread going without him again

so Dale, as I'm driving this big block 396 elco, the engine looks fairly clean and appears to have been repainted and rebuilt not to long ago, it was sitting in my buddies back storage for a couple of years, anyway as I hammer down the gas pedal it takes off and has some good power. Enough power for me to say "yeah this has the potential for some tickets", but I am saying to myself that my truck would eat this thing up. Now the big block sounds like it had a stock cam, nice smooth idle. After seeing my cam specs and knowin that I only have 1.94 heads is it possible that my hp's are up around 350?
Posted via Mobile Device

**Ol Blue K20** · 03-15-2013, 07:58 AM

very possible, the 70 z28 was rated 350hp
Posted via Mobile Device

shawno72 · 03-15-2013, 08:16 AM

Quote:

Originally Posted by Ol Blue K20

very possible, the 70 z28 was rated 350hp
Posted via Mobile Device

NewType72 · 03-15-2013, 10:22 AM

(Note to self never line up with Shawn)

Posted via Mobile Device

shawno72 · 03-15-2013, 10:29 AM

Quote:

Originally Posted by NewType72

(Note to self never line up with Shawn)

Posted via Mobile Device

67chevy1series · 03-15-2013, 11:03 AM

Quote:

Originally Posted by NewType72

(Note to self never line up with Shawn)

Posted via Mobile Device

Quote:

Originally Posted by shawno72

Quote:

Originally Posted by Ol Blue K20

very possible, the 70 z28 was rated 350hp
Posted via Mobile Device

Quote:

Originally Posted by shawno72

Yep we're gonna have to keep his thread going without him again

so Dale, as I'm driving this big block 396 elco, the engine looks fairly clean and appears to have been repainted and rebuilt not to long ago, it was sitting in my buddies back storage for a couple of years, anyway as I hammer down the gas pedal it takes off and has some good power. Enough power for me to say "yeah this has the potential for some tickets", but I am saying to myself that my truck would eat this thing up. Now the big block sounds like it had a stock cam, nice smooth idle. After seeing my cam specs and knowin that I only have 1.94 heads is it possible that my hp's are up around 350?
Posted via Mobile Device

Quote:

Originally Posted by Ol Blue K20

Posted via Mobile DeviceRick, you're being a little on the quiet side. hope it's cause youre busy.
Posted via Mobile Device

Oh it is

Quote:

Originally Posted by jbclassix

Rick!!! get rid of those rubber strips of intake leakers, then run a bead of "Right Stuff" silicone front and back. Then let it cure for atleast 12 hours before running it!

Those things are that bad huh? Well I don't have right stuff but I do have the black magic can I use that?

Quote:

Originally Posted by Ol Blue K20

I normally go for the swap meet and then wander through the show, but I may hang out a while this time

Quote:

Originally Posted by shawno72

Way to go Rick!! Engine is looking killer. Hey Dale so you are gonna make it out to GG's I take it.

Is there anything you guys suggest I take to the car show besides the 67?

Well guys I was hard at work yesterday, I gotta alot of stuff done. Pics soon to follow!
Posted via Mobile Device

shawno72 · 03-15-2013, 11:24 AM

Quote:

Originally Posted by 67chevy1series

Is there anything you guys suggest I take to the car show besides the 67?

Well guys I was hard at work yesterday, I gotta alot of stuff done. Pics soon to follow!
Posted via Mobile Device

Yep bring some chairs some meat for the BBQ and some drinks.

67chevy1series · 03-15-2013, 11:39 AM

Ok I have this big super fancy BBQ'r but it's a little extreme so ill bring my little old Kmart BBQ'r and ill bring some beer for you guys and some soda for me

Posted via Mobile Device

shawno72 · 03-15-2013, 11:47 AM

sounds good Rick, bring some extra soda for me too.

67chevy1series · 03-15-2013, 11:56 AM

What'll ya have? Haha will do Shawn

Posted via Mobile Device

**Ol Blue K20** · 03-15-2013, 01:05 PM

Nice... lookin good

67chevy1series · 03-15-2013, 01:08 PM

Quote:

Originally Posted by Ol Blue K20

Nice... lookin good

should look better between my black frame rails!

**Ol Blue K20** · 03-15-2013, 01:23 PM

Quote:

Originally Posted by 67chevy1series

should look better between my black frame rails!

30 more minutes and it'll be

time. No overtime today!! YEAH!!

67chevy1series · 03-15-2013, 01:25 PM

lol wish i didnt have school so i could be at home tearing my truck apart!

shawno72 · 03-15-2013, 02:10 PM

Quote:

Originally Posted by 67chevy1series

lol wish i didnt have school so i could be at home tearing my truck apart!

Soon enough, you'll be barking.

fastcam1 · 03-15-2013, 02:26 PM

Looks awesome makes my motor look like a turd lol
Posted via Mobile Device

67chevy1series · 03-15-2013, 02:38 PM

Quote:

Originally Posted by shawno72

Soon enough, you'll be barking.

Haha if I don't already... I can tell by the way the 67 acts that if I had a nice engine and a posi it would LIGHT EM UP! Muhhahahaha!

Quote:

Originally Posted by fastcam1

Looks awesome makes my motor look like a turd lol
Posted via Mobile Device

That's what I feel like when I look at other people's builds and there engines and then I look it my tired 302 all dirty and leaky marking its territory everywhere I go.. So hopefully when I pop the good and you see my 327 "turbo fire" all cleaned up, everybody will have something to look at!
Posted via Mobile Device

jbclassix · 03-15-2013, 05:51 PM

Don't know about the black magic... it should work better than those rubber strips. I am kicking my butt for dropping the 350 in my 95 with the rubber strips. It is POORING out oil! Ask anyone one here about the rubber strips.

shawno72 · 03-15-2013, 06:03 PM

Loose the strips Rick!!

**Ol Blue K20** · 03-15-2013, 08:07 PM

yes Rick do not use the rubber end gaskets. use a good quality silicone. Put a small dab under the side gaskets at the end and then a 1/4 inch bead and set the manifold.Let it cure at least overnight before you start it. So set the manifold before you put the motor in and it will be cured by the time you get it all hooked up. If you have questions, call me
Posted via Mobile Device

03-14-2013, 02:44 PM	#2
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: 1967 Chevy CST aka "the loud truck" Way to go Rick!! Engine is looking killer. Hey Dale so you are gonna make it out to GG's I take it. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

03-14-2013, 08:11 PM	#4
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: 1967 Chevy CST aka "the loud truck" Rick!!! get rid of those rubber strips of intake leakers, then run a bead of "Right Stuff" silicone front and back. Then let it cure for atleast 12 hours before running it! __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

03-15-2013, 02:17 AM	#5
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,013	Re: 1967 Chevy CST aka "the loud truck" Posted via Mobile DeviceRick, you're being a little on the quiet side. hope it's cause youre busy. Posted via Mobile Device __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

03-15-2013, 07:15 AM	#6
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: 1967 Chevy CST aka "the loud truck" Yep we're gonna have to keep his thread going without him again so Dale, as I'm driving this big block 396 elco, the engine looks fairly clean and appears to have been repainted and rebuilt not to long ago, it was sitting in my buddies back storage for a couple of years, anyway as I hammer down the gas pedal it takes off and has some good power. Enough power for me to say "yeah this has the potential for some tickets", but I am saying to myself that my truck would eat this thing up. Now the big block sounds like it had a stock cam, nice smooth idle. After seeing my cam specs and knowin that I only have 1.94 heads is it possible that my hp's are up around 350? Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

03-15-2013, 07:58 AM	#7
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,013	Re: 1967 Chevy CST aka "the loud truck" very possible, the 70 z28 was rated 350hp Posted via Mobile Device __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

03-15-2013, 10:22 AM	#9
NewType72 Registered User Join Date: Feb 2012 Location: turlock Posts: 2,177	Re: 1967 Chevy CST aka "the loud truck" (Note to self never line up with Shawn) Posted via Mobile Device __________________ Project NewType 1972 Chevy C/10 Cheyenne Super ( Daily Driven Showtruck ) http://67-72chevytrucks.com/vboard/s...d.php?t=507903 Project Great Grandpa's Legacy 1973 Chevy C/10 Cheyenne ( Current daily driver collecting big time parts ) http://67-72chevytrucks.com/vboard/s...89#post7084289 - Dylan (209)-985-7721

03-15-2013, 11:39 AM	#13
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1967 Chevy CST aka "the loud truck" Ok I have this big super fancy BBQ'r but it's a little extreme so ill bring my little old Kmart BBQ'r and ill bring some beer for you guys and some soda for me Posted via Mobile Device

03-15-2013, 11:47 AM	#14
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: 1967 Chevy CST aka "the loud truck" sounds good Rick, bring some extra soda for me too. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

03-15-2013, 11:56 AM	#15
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1967 Chevy CST aka "the loud truck" What'll ya have? Haha will do Shawn Posted via Mobile Device

03-15-2013, 01:05 PM	#16
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,013	Re: 1967 Chevy CST aka "the loud truck" Nice... lookin good __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

03-15-2013, 01:25 PM	#19
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1967 Chevy CST aka "the loud truck" lol wish i didnt have school so i could be at home tearing my truck apart!

03-15-2013, 02:26 PM	#21
fastcam1 Young gun Join Date: Feb 2009 Location: Spanaway WA Posts: 631	Re: 1967 Chevy CST aka "the loud truck" Looks awesome makes my motor look like a turd lol Posted via Mobile Device __________________ 67 SWB Custom "JANE" http://67-72chevytrucks.com/vboard/s...d.php?t=554024 Northwest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/ Cameron sparks

03-15-2013, 05:51 PM	#23
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: 1967 Chevy CST aka "the loud truck" Don't know about the black magic... it should work better than those rubber strips. I am kicking my butt for dropping the 350 in my 95 with the rubber strips. It is POORING out oil! Ask anyone one here about the rubber strips. __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

03-15-2013, 06:03 PM	#24
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: 1967 Chevy CST aka "the loud truck" Loose the strips Rick!! __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

03-15-2013, 08:07 PM	#25
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,013	Re: 1967 Chevy CST aka "the loud truck" yes Rick do not use the rubber end gaskets. use a good quality silicone. Put a small dab under the side gaskets at the end and then a 1/4 inch bead and set the manifold.Let it cure at least overnight before you start it. So set the manifold before you put the motor in and it will be cured by the time you get it all hooked up. If you have questions, call me Posted via Mobile Device __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.