What did you do to your truck today? - Page 35 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rendus · 03-06-2010, 06:46 PM

I dug into both my front fender bottoms to see what kind of patching they'll need.

The right side had a 4" x 5" metal patch riveted in and then slathered with bondo. The left side had just bondo filling the rust holes and dents. A half inch over most of it and a clob the size of a baby's fist in the biggest hole. Gotta love previous owners!

badriv455 · 03-06-2010, 10:43 PM

I replaced the windshield and the hood today on my '64 C10. Thanks to my father in law who new how to put the windshield in. I never would've gotten it on my own.

64GMCHorsepower · 03-06-2010, 11:05 PM

I actually installed my bed fill gas filler, installed the peel-a-mat in the doors to quieten them down, put the right bolts to hold my front bumper on, and installed almost all of the bolts holding the bed wood and the strips together.....

oh, and I sprayed off the truck to help keep it clean.....

1Bad62Pro/Street · 03-06-2010, 11:41 PM

Well I was off today so I did some cleaning for preparation for this Spring when I will start back on her.
I checked the truck all over and seen all the troubled areas that needs to be addressed.
The truck has sat for 4 years so there is a lot issues that need to be addressed.
My plans are to beef up the Power Train Set-Up.
Engine, trans, front and rear suspension.
The theme idea is going to stay the same.
Nostalgia Pro/Street.
Here are some of the Pics I took today.

1Bad62Pro/Street · 03-06-2010, 11:55 PM

Here is some of the issues:

64GMCHorsepower · 03-06-2010, 11:52 PM

You need bigger tires in the rear 1BAD62.......

1Bad62Pro/Street · 03-07-2010, 12:06 AM

Quote:

Originally Posted by 64GMCHorsepower

You need bigger tires in the rear 1BAD62.......

Pro Street Trucks/Cars pics!!! im in love with the fatty tires!!
http://67-72chevytrucks.com/vboard/s...66#post3847666

I agree 100%
I'm still not satisfied!
I want this:
Mickey Thompson Sportsman Pro
The Widest High Performance Street Legal Tire.
33X21.50-15LT

http://www.mickeythompsontires.com/s...m=SportsmanPro

I have these:

markeb01 · 03-07-2010, 12:03 AM

I really like your truck and the direction you're taking it. Anxious to see the progress coming up.

1Bad62Pro/Street · 03-07-2010, 12:13 AM

Quote:

Originally Posted by markeb01

I really like your truck and the direction you're taking it. Anxious to see the progress coming up.

Thanks Bud!
I have to stop looking at you interior!
It's giving me ideas.
Yea, I am going to start back on her soon.
It will be a slow progress though.
Little bit of money along with a little bit of time it seems.
I will keep the updates coming.
I just miss driving her, and barking the tires when I shift the gears manually....

1Bad62Pro/Street · 03-07-2010, 12:29 AM

The Neglected Engine:

1Bad62Pro/Street · 03-07-2010, 12:34 AM

Front End:

joehalford01 · 03-07-2010, 12:35 AM

Finally got the sob 305 motor in my 65 ready to pull, couldn't finish though, I'm doing the engine swap in grass so I needed to pick up some plywood to roll the engine hoist on

.

Alan's Classic · 03-07-2010, 12:52 AM

Hung my fuel tank using these.

64GMCHorsepower · 03-07-2010, 12:14 AM

What kinda BS would you need to run those.......and I am assuming you have a narrowed rear end?

Sillyoldman · 03-07-2010, 12:22 AM

I set up another bedroom

No room in shop. At least its dry. Other than that I only had time to bend & install one brake line.

**Chevy Fleetside** · 03-07-2010, 12:26 AM

I cut up an 8 ft bed (only an 81 year model) then cut up some of the frame and rear diff and stuffed it all in my Ford Ranger. Oh yeah. And a front crossmember out of a 66 c 20. Drum brakes and all. Next time I go to my shop space, I think I am going to bring the front end home so I can clean and rebuild it.

markeb01 · 03-07-2010, 12:27 AM

Bed room!! I get it!

markeb01 · 03-07-2010, 01:07 AM

Very cool. Where did you source those?

62 Bowtie · 03-07-2010, 02:08 AM

Finishing up my bedwood, satin black painted oak and polished SS strips, not done yet I need to install the angle strips

Before and After

63 extreme low · 03-07-2010, 02:54 AM

Quote:

Originally Posted by 62 Bowtie

Finishing up my bedwood, satin black painted oak and polished SS strips, not done yet I need to install the angle strips

Before and After

Well I just decided on what wood to put in my bed!!!

1Bad62Pro/Street · 03-08-2010, 07:02 AM

Quote:

Originally Posted by 62 Bowtie

Finishing up my bedwood, satin black painted oak and polished SS strips, not done yet I need to install the angle strips

Before and After

Did that once.

Hottrucks · 03-08-2010, 08:03 AM

funny I started the power brake covertion..would have been am easy swap but the master was leaking then I broke the short lines between the master and proportioning valve.....I have to see if I can make them up

Nailz · 03-08-2010, 07:07 PM

Quote:

Originally Posted by 62 Bowtie

Finishing up my bedwood, satin black painted oak and polished SS strips, not done yet I need to install the angle strips

Before and After

62Bowtie, that looks awesome! I love the contrast of color.

62 Bowtie · 03-09-2010, 03:24 AM

Quote:

Originally Posted by Nailz

62Bowtie, that looks awesome! I love the contrast of color.

Thanks Nailz

I kept goin back and forth about painting or staining but the test on Mar-K's web site convinced me, also while the wood was out I had a chance to apply POR-15 to the frame and rails getting all that rust off the bedsides was fun too!

hornet53 · 03-09-2010, 11:18 PM

Haven't posted in a while. Hell, haven't done anything to the truck in a while. Too much work and not enough, um.. truck related work, I guess. But I did get a chance to hit it with some Scotch-Brite to knock off the chalky crap i try to pass off as paint.

Here it is, aired up and half scrubbed. you can see the difference for yourselves. The bed has not been touched, the cab and fenders have been washed with water and a sponge with a scotch-brite side.

03-06-2010, 06:46 PM	#1
rendus Registered User Join Date: Apr 2009 Location: smyrna tn Posts: 221	Re: What did you do to your truck today? I dug into both my front fender bottoms to see what kind of patching they'll need. The right side had a 4" x 5" metal patch riveted in and then slathered with bondo. The left side had just bondo filling the rust holes and dents. A half inch over most of it and a clob the size of a baby's fist in the biggest hole. Gotta love previous owners!

03-06-2010, 10:43 PM	#2
badriv455 '67 Chevy C-50 Join Date: Feb 2008 Location: Monticello, IA Posts: 62	Re: What did you do to your truck today? I replaced the windshield and the hood today on my '64 C10. Thanks to my father in law who new how to put the windshield in. I never would've gotten it on my own. __________________ Bad Riv '67 C50 Flatbed Dump '98 Z71 Ext. Cab

03-06-2010, 11:05 PM	#3
64GMCHorsepower Justified! Join Date: Apr 2007 Location: Valencia, Ca Posts: 1,366	Re: What did you do to your truck today? I actually installed my bed fill gas filler, installed the peel-a-mat in the doors to quieten them down, put the right bolts to hold my front bumper on, and installed almost all of the bolts holding the bed wood and the strips together..... oh, and I sprayed off the truck to help keep it clean..... __________________ Chad 1964 GMC Fleetside Shortbed....350/700R4 tranny

03-06-2010, 11:41 PM	#4
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: What did you do to your truck today? Well I was off today so I did some cleaning for preparation for this Spring when I will start back on her. I checked the truck all over and seen all the troubled areas that needs to be addressed. The truck has sat for 4 years so there is a lot issues that need to be addressed. My plans are to beef up the Power Train Set-Up. Engine, trans, front and rear suspension. The theme idea is going to stay the same. Nostalgia Pro/Street. Here are some of the Pics I took today. Attached Images __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D. Last edited by 1Bad62Pro/Street; 03-06-2010 at 11:42 PM.

03-06-2010, 11:55 PM	#5
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: What did you do to your truck today? Here is some of the issues: Attached Images __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

03-06-2010, 11:52 PM	#6
64GMCHorsepower Justified! Join Date: Apr 2007 Location: Valencia, Ca Posts: 1,366	Re: What did you do to your truck today? You need bigger tires in the rear 1BAD62....... __________________ Chad 1964 GMC Fleetside Shortbed....350/700R4 tranny

03-07-2010, 12:03 AM	#8
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: What did you do to your truck today? I really like your truck and the direction you're taking it. Anxious to see the progress coming up.

03-07-2010, 12:29 AM	#10
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: What did you do to your truck today? The Neglected Engine: Attached Images __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

03-07-2010, 12:34 AM	#11
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: What did you do to your truck today? Front End: Attached Images __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

03-07-2010, 12:35 AM	#12
joehalford01 Registered User Join Date: May 2007 Location: Visalia, CA Posts: 98	Re: What did you do to your truck today? Finally got the sob 305 motor in my 65 ready to pull, couldn't finish though, I'm doing the engine swap in grass so I needed to pick up some plywood to roll the engine hoist on . __________________ Dirty fingernails don't make you a man...missing fingernails...now that makes you a man.

03-07-2010, 12:52 AM	#13
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: What did you do to your truck today? Hung my fuel tank using these. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

03-07-2010, 12:14 AM	#14
64GMCHorsepower Justified! Join Date: Apr 2007 Location: Valencia, Ca Posts: 1,366	Re: What did you do to your truck today? What kinda BS would you need to run those.......and I am assuming you have a narrowed rear end? __________________ Chad 1964 GMC Fleetside Shortbed....350/700R4 tranny

03-07-2010, 12:22 AM	#15
Sillyoldman #16876 Join Date: Apr 2005 Location: Auburn WA Posts: 12,266	Re: What did you do to your truck today? I set up another bedroom No room in shop. At least its dry. Other than that I only had time to bend & install one brake line. Attached Images __________________ Posted via Stationary Device '71 Custom Deluxe C-20 402. '67 Buick Special 455. '49 Plymouth Special Deluxe. *"I love that old car smell"* *Some people are like Slinkies... not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs.*

03-07-2010, 12:26 AM	#16
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,779	Re: What did you do to your truck today? I cut up an 8 ft bed (only an 81 year model) then cut up some of the frame and rear diff and stuffed it all in my Ford Ranger. Oh yeah. And a front crossmember out of a 66 c 20. Drum brakes and all. Next time I go to my shop space, I think I am going to bring the front end home so I can clean and rebuild it. __________________ "A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536

03-07-2010, 12:27 AM	#17
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: What did you do to your truck today? Bed room!! I get it!



Register or Log In To remove these advertisements.

03-07-2010, 01:07 AM	#18
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: What did you do to your truck today? Very cool. Where did you source those?

03-07-2010, 02:08 AM	#19
62 Bowtie Registered User Join Date: Nov 2008 Location: Elk Grove Ca Posts: 629	Re: What did you do to your truck today? Finishing up my bedwood, satin black painted oak and polished SS strips, not done yet I need to install the angle strips Before and After Attached Images Last edited by 62 Bowtie; 03-07-2010 at 02:10 AM.

03-08-2010, 08:03 AM	#22
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: What did you do to your truck today? funny I started the power brake covertion..would have been am easy swap but the master was leaking then I broke the short lines between the master and proportioning valve.....I have to see if I can make them up

03-09-2010, 11:18 PM	#25
hornet53 Registered User Join Date: Nov 2009 Location: Vancouver WA Posts: 23	Re: What did you do to your truck today? Haven't posted in a while. Hell, haven't done anything to the truck in a while. Too much work and not enough, um.. truck related work, I guess. But I did get a chance to hit it with some Scotch-Brite to knock off the chalky crap i try to pass off as paint. Here it is, aired up and half scrubbed. you can see the difference for yourselves. The bed has not been touched, the cab and fenders have been washed with water and a sponge with a scotch-brite side. Attached Images __________________ Jeremy 1953 Hudson Hornet Sedan 308ci Twin-H-Power! 2003 Ford Crown Victoria Police Interceptor (beater!) 1966 Chevy C-10 Longbed SBW 396/TH400 Member Deviants C.C. Vanc.WA

Register or Log In To remove these advertisements.