68 project - Page 35 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**GR8-68** · 07-23-2017, 06:22 AM

Got all the plug wires run yesterday titanium boots installed. Slow tedious work might I add. Trying to figure out where to locate the msd box and coil now, I am thinking inside the cab behind the dash seeing the heater box is deleted now.

NC_John · 07-23-2017, 11:54 AM

Quote:

Originally Posted by GR8-68

Got all the plug wires run yesterday titanium boots installed. Slow tedious work might I add. Trying to figure out where to locate the msd box and coil now, I am thinking inside the cab behind the dash seeing the heater box is deleted now.

Looking really good Larry!

kehstr · 07-23-2017, 12:05 PM

I'm guessing you did fuel injection? If so what kit did you use?

rusty76 · 07-23-2017, 12:33 PM

Looking great Larry.

**GR8-68** · 07-23-2017, 02:26 PM

Quote:

Originally Posted by kehstr

I'm guessing you did fuel injection? If so what kit did you use?

I am going to do fuel injection, right now the air cleaner is just sitting on there. Going with the Holley Sniper kiit

Thanks guys I have two months to get as much done as I can. Have to move out of the shop end of September

flashed · 07-23-2017, 05:06 PM

Looks very nice .

rusty76 · 07-23-2017, 05:28 PM

Sucks about the shop.

**GR8-68** · 07-23-2017, 05:35 PM

Thanks guys, yes it does, going to be trying to build a shop at the house

Been needing to anyways

67ChevyRedneck · 07-24-2017, 11:54 AM

Quote:

Originally Posted by GR8-68

Thanks guys I have two months to get as much done as I can. Have to move out of the shop end of September

That sucks! Is your job moving from that shop?

You can get it done in that amount of time!

**GR8-68** · 07-24-2017, 01:16 PM

Quote:

Originally Posted by 67ChevyRedneck

That sucks! Is your job moving from that shop?

You can get it done in that amount of time!

I work up the street from the truck shop. I highly doubt I can have it done by the end of September but am going to try to get as much as I can. Ordering the fuel injection this week where I can hopefully get it to the point it is mobile on its own, but, even that will be a challenge plus trying to plan to build a shop at home on top of that.

Just a stepping stone

rusty76 · 07-24-2017, 05:12 PM

Let me know if you need any help. If I'm available I'll give you a hand.

**GR8-68** · 07-24-2017, 08:27 PM

Quote:

Originally Posted by rusty76

Let me know if you need any help. If I'm available I'll give you a hand.

Thanks bro, I sure do appreciate that. I will let you know..

**GR8-68** · 07-26-2017, 07:06 AM

well it is on the way, thanks nlped for talking me out of the Holley sniper and into the FAST system

Should be here by Monday

hewittca · 07-26-2017, 10:23 AM

Nice! If/when I ever build a 350 for mine I want to go with a similar EFI setup. I'm really curious to see how you like it.

**nlped** · 07-26-2017, 04:07 PM

Excellent! Now I hope you love it.

**Dieselwrencher** · 07-26-2017, 04:14 PM

Very nice work on your truck! I eventually want to put EFI on my 354 in my 40 Ford. There are just too many other things it needs if I ever want to drive it before it is 80 though.

**GR8-68** · 07-26-2017, 04:36 PM

Quote:

Originally Posted by nlped

Excellent! Now I hope you love it.

I am sure I will be pleased with it. I have your address if I do not like it

**GR8-68** · 07-26-2017, 04:37 PM

Quote:

Originally Posted by Dieselwrencher

Very nice work on your truck! I eventually want to put EFI on my 354 in my 40 Ford. There are just too many other things it needs if I ever want to drive it before it is 80 though.

Thanks Ryan, I will post progress and feedback on how I like it or not.

**nlped** · 07-27-2017, 09:51 PM

I got the bumper today. Looks awesome. It'll be amazing on Walter. Thanks!

**GR8-68** · 07-28-2017, 02:53 AM

Quote:

Originally Posted by nlped

I got the bumper today. Looks awesome. It'll be amazing on Walter. Thanks!

Glad you were pleased with it, I sure will miss her

**Oregon 1967 GMC** · 07-28-2017, 10:55 AM

I'm on pins and needles about the FAST. I'm considering it for my 67 GMC and/or 65 Malibu. Good luck you have our backing!

**GR8-68** · 07-28-2017, 04:01 PM

Some new toys came in today, gotta love Summit Racing and how quick they get things shipped to you. The FAST system came in today along with my Meziere water pump and my AN fitting waterneck.. I feel another chapter coming to the end.

**GR8-68** · 07-28-2017, 04:17 PM

Pretty !!!

rusty76 · 07-28-2017, 06:31 PM

I know you couldn't wait to bolt it on.

**nlped** · 07-28-2017, 07:23 PM

I would have done the same thing!!!

07-23-2017, 06:22 AM	#851
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: 68 project Got all the plug wires run yesterday titanium boots installed. Slow tedious work might I add. Trying to figure out where to locate the msd box and coil now, I am thinking inside the cab behind the dash seeing the heater box is deleted now. Attached Images __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

07-23-2017, 12:05 PM	#853
kehstr Registered User Join Date: Mar 2015 Location: Utah Posts: 750	Re: 68 project I'm guessing you did fuel injection? If so what kit did you use? __________________ 72 GMC highlander nicknamed by my then 6-year-old brother "stripes" http://67-72chevytrucks.com/vboard/s....php?p=7378180 Check out my Youtube channel @Chad's Fab

07-23-2017, 12:33 PM	#854
rusty76 Registered User Join Date: Sep 2012 Location: Midway, NC Posts: 3,275	Re: 68 project Looking great Larry. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=581873 The low buck build threads. Check'em out! http://67-72chevytrucks.com/vboard/s...d.php?t=666022 My build thread Crossmembers CC

07-23-2017, 05:06 PM	#856
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: 68 project Looks very nice .

07-23-2017, 05:28 PM	#857
rusty76 Registered User Join Date: Sep 2012 Location: Midway, NC Posts: 3,275	Re: 68 project Sucks about the shop. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=581873 The low buck build threads. Check'em out! http://67-72chevytrucks.com/vboard/s...d.php?t=666022 My build thread Crossmembers CC

07-23-2017, 05:35 PM	#858
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: 68 project Thanks guys, yes it does, going to be trying to build a shop at the house Been needing to anyways __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

07-24-2017, 05:12 PM	#861
rusty76 Registered User Join Date: Sep 2012 Location: Midway, NC Posts: 3,275	Re: 68 project Let me know if you need any help. If I'm available I'll give you a hand. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=581873 The low buck build threads. Check'em out! http://67-72chevytrucks.com/vboard/s...d.php?t=666022 My build thread Crossmembers CC

07-26-2017, 07:06 AM	#863
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: 68 project well it is on the way, thanks nlped for talking me out of the Holley sniper and into the FAST system Should be here by Monday Attached Images __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

07-26-2017, 10:23 AM	#864
hewittca Registered User Join Date: Jun 2014 Location: Mocksville, NC Posts: 1,761	Re: 68 project Nice! If/when I ever build a 350 for mine I want to go with a similar EFI setup. I'm really curious to see how you like it. __________________ Builds: Green Gus the 68 C10 \| Bluey the 72 1500 \| Lowly the 70 C10 - Instagram: @dr.hewitt - C10 Concept/Development Photos: Master Thread

07-26-2017, 04:07 PM	#865
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: 68 project Excellent! Now I hope you love it. __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

07-26-2017, 04:14 PM	#866
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: 68 project Very nice work on your truck! I eventually want to put EFI on my 354 in my 40 Ford. There are just too many other things it needs if I ever want to drive it before it is 80 though. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

07-27-2017, 09:51 PM	#869
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: 68 project I got the bumper today. Looks awesome. It'll be amazing on Walter. Thanks! __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

07-28-2017, 10:55 AM	#871
Oregon 1967 GMC Senior Member Join Date: Jan 2014 Location: Portland, Oregon Posts: 440	Re: 68 project I'm on pins and needles about the FAST. I'm considering it for my 67 GMC and/or 65 Malibu. Good luck you have our backing! __________________ Hey man 67 GMC Short Stepside 400 small block, turbo 350. Build thread:http://67-72chevytrucks.com/vboard/s...d.php?t=650603

07-28-2017, 04:01 PM	#872
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: 68 project Some new toys came in today, gotta love Summit Racing and how quick they get things shipped to you. The FAST system came in today along with my Meziere water pump and my AN fitting waterneck.. I feel another chapter coming to the end. Attached Images __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

07-28-2017, 04:17 PM	#873
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: 68 project Pretty !!! Attached Images __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant



Register or Log In To remove these advertisements.

07-28-2017, 06:31 PM	#874
rusty76 Registered User Join Date: Sep 2012 Location: Midway, NC Posts: 3,275	Re: 68 project I know you couldn't wait to bolt it on. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=581873 The low buck build threads. Check'em out! http://67-72chevytrucks.com/vboard/s...d.php?t=666022 My build thread Crossmembers CC

07-28-2017, 07:23 PM	#875
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: 68 project I would have done the same thing!!! __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

Register or Log In To remove these advertisements.