Power Steering Adapter Plates - Page 35 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Vero67** · 04-28-2019, 11:26 PM

Great thank you

**Vero67** · 05-02-2019, 08:18 PM

I received the part today, looks great! Thank you for the fast shipping.

**l79m20** · 06-19-2019, 11:26 PM

Need a power steering setup for a 1965 c10. Plate and items to shorten shaft. PM with info. Thanks.

**Captainfab** · 06-19-2019, 11:32 PM

PM sent

Quote:

Originally Posted by l79m20

Need a power steering setup for a 1965 c10. Plate and items to shorten shaft. PM with info. Thanks.

**Vero67** · 06-20-2019, 06:52 AM

Thanks again, some information for 67 K10 owners. I used the original upper rear hole in the frame, then lined up my box and steering shaft. Scribed where the adaptor was, then marked and drilled the holes. Worked out great.

**l79m20** · 06-26-2019, 12:40 AM

Received the parts today. They look great as usual. Thank you so much.

**Captainfab** · 06-26-2019, 11:21 PM

Thank you for the compliment

kmabe · 07-06-2019, 01:46 PM

I need a power steering adaptor plate let me know what I need to do thanks

**Captainfab** · 07-06-2019, 11:03 PM

I will send you a PM with ordering and payment info.

Quote:

Originally Posted by kmabe

I need a power steering adaptor plate let me know what I need to do thanks

bigdisplay442 · 08-05-2019, 02:22 AM

I installed my gearbox and plate months ago but I'm just now hooking up the pitman arm and the center link. My pitman arm is too long for the 1978 PS gearbox I'm using. What did I miss in the instructions that I no longer have? Which pitman arm was I suppose to use? The center link won't clear the engine cradle.
Thanks.....

**Captainfab** · 08-05-2019, 11:16 PM

You should be using the 1978 C10 pitman arm. Are you sure it is installed all the way onto the sector shaft? Did you install the adapter plate according to the instructions and use the supplied template?

Awats · 08-16-2019, 10:57 AM

Hi Capt fab,will a power steering box from a 4x4 C10 fit my 66 burb with one of your brackets.Very few breakers here across the pond and shipping one over is very costly.

**Captainfab** · 08-17-2019, 12:23 AM

While the K series steering box will bolt up, the sector shaft is different and will not accept a C series pitman arm.

Quote:

Originally Posted by Awats

Hi Capt fab,will a power steering box from a 4x4 C10 fit my 66 burb with one of your brackets.Very few breakers here across the pond and shipping one over is very costly.

grubsster · 10-17-2019, 09:34 PM

Hi Captain.

I am getting the parts together to do the power steering swap. I used 72 C10 spindles and steering column when I did my power brakes/automatic trans swap. I have an undated power steering box that is standard so I am assuming 70's. Can I use my current pitman arm on the power box? Also since I have the collapsible column, I assume I should be able to just mount the rag joint to the box. Please PM with payment info for the plate and hardware. Also any advice would be greatly appreciated. Thanks

**Captainfab** · 10-17-2019, 10:45 PM

You must use the pitman arm that is for the particular power steering box that you are using. You can NOT use the pitman arm from your original manual steering box.

The rag joint always bolts directly to the steering box input shaft. That is unless for some reason you are eliminating the rag joint all together and using a universal joint.

I will send you a PM with ordering and payment info.

Quote:

Originally Posted by grubsster

Hi Captain.

I am getting the parts together to do the power steering swap. I used 72 C10 spindles and steering column when I did my power brakes/automatic trans swap. I have an undated power steering box that is standard so I am assuming 70's. Can I use my current pitman arm on the power box? Also since I have the collapsible column, I assume I should be able to just mount the rag joint to the box. Please PM with payment info for the plate and hardware. Also any advice would be greatly appreciated. Thanks

T and S · 11-08-2019, 12:46 AM

Captainfab I need an adapter plate for a power steering box for a 1966 C-10. Also, will a collapsible intermediate shaft work with the power steering box on a 66'. I know I will have to cut off and modify the steering shaft at the column. Please send me PM on ordering info. Thanks !!

**Captainfab** · 11-08-2019, 12:49 AM

Yes you can use a collapsible intermediate shaft. I will send you a PM with ordering info.

Quote:

Originally Posted by T and S

Captainfab I need an adapter plate for a power steering box for a 1966 C-10. Also, will a collapsible intermediate shaft work with the power steering box on a 66'. I know I will have to cut off and modify the steering shaft at the column. Please send me PM on ordering info. Thanks !!

T and S · 11-08-2019, 07:45 PM

Payment and shipping info sent through paypal - Thanks !!

**Captainfab** · 11-08-2019, 11:40 PM

Payment received. I will ship your order on Tuesday since Monday is Veterans Day.

T and S · 11-16-2019, 12:42 PM

Parts received - Thanks !

**Captainfab** · 11-17-2019, 12:16 AM

Thank you for the purchase

Patinatruck · 12-05-2019, 12:40 PM

Quote:

Originally Posted by Captainfab

Thank you for the purchase

Jon,

I need a an adapter to convert my 65 c10 to power please send me pm with details on how to order, thanks!

**Captainfab** · 12-05-2019, 11:15 PM

I replied to the email you sent me this morning. Did you not receive it?

Quote:

Originally Posted by Patinatruck

Jon,

I need a an adapter to convert my 65 c10 to power please send me pm with details on how to order, thanks!

**Captainfab** · 12-26-2019, 10:59 PM

Due to an increase in the cost of the laser cutting, I have had to increase the cost of the steering box adapter plates.

Dieman63 · 01-02-2020, 12:19 PM

PM sent

04-28-2019, 11:26 PM	#851
Vero67 Senior Member Join Date: May 2013 Location: Vero Beach FL Posts: 297	Re: Power Steering Adapter Plates Great thank you

05-02-2019, 08:18 PM	#852
Vero67 Senior Member Join Date: May 2013 Location: Vero Beach FL Posts: 297	Re: Power Steering Adapter Plates I received the part today, looks great! Thank you for the fast shipping.

06-19-2019, 11:26 PM	#853
l79m20 Registered User Join Date: May 2005 Location: Reading, Kansas Posts: 628	Re: Power Steering Adapter Plates Need a power steering setup for a 1965 c10. Plate and items to shorten shaft. PM with info. Thanks.

06-20-2019, 06:52 AM	#855
Vero67 Senior Member Join Date: May 2013 Location: Vero Beach FL Posts: 297	Re: Power Steering Adapter Plates Thanks again, some information for 67 K10 owners. I used the original upper rear hole in the frame, then lined up my box and steering shaft. Scribed where the adaptor was, then marked and drilled the holes. Worked out great.

06-26-2019, 12:40 AM	#856
l79m20 Registered User Join Date: May 2005 Location: Reading, Kansas Posts: 628	Re: Power Steering Adapter Plates Received the parts today. They look great as usual. Thank you so much.

06-26-2019, 11:21 PM	#857
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Power Steering Adapter Plates Thank you for the compliment __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

07-06-2019, 01:46 PM	#858
kmabe Registered User Join Date: Feb 2017 Location: sneedville tn Posts: 5	Re: Power Steering Adapter Plates I need a power steering adaptor plate let me know what I need to do thanks

08-05-2019, 02:22 AM	#860
bigdisplay442 Registered User Join Date: Nov 2015 Location: Whitehouse, Texas Posts: 21	Re: Power Steering Adapter Plates I installed my gearbox and plate months ago but I'm just now hooking up the pitman arm and the center link. My pitman arm is too long for the 1978 PS gearbox I'm using. What did I miss in the instructions that I no longer have? Which pitman arm was I suppose to use? The center link won't clear the engine cradle. Thanks.....

08-05-2019, 11:16 PM	#861
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Power Steering Adapter Plates You should be using the 1978 C10 pitman arm. Are you sure it is installed all the way onto the sector shaft? Did you install the adapter plate according to the instructions and use the supplied template? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

08-16-2019, 10:57 AM	#862
Awats Registered User Join Date: Mar 2018 Location: Chichester ,West Sussex Posts: 6	Re: Power Steering Adapter Plates Hi Capt fab,will a power steering box from a 4x4 C10 fit my 66 burb with one of your brackets.Very few breakers here across the pond and shipping one over is very costly.

10-17-2019, 09:34 PM	#864
grubsster Registered User Join Date: Sep 2011 Location: N.C. Posts: 145	Re: Power Steering Adapter Plates Hi Captain. I am getting the parts together to do the power steering swap. I used 72 C10 spindles and steering column when I did my power brakes/automatic trans swap. I have an undated power steering box that is standard so I am assuming 70's. Can I use my current pitman arm on the power box? Also since I have the collapsible column, I assume I should be able to just mount the rag joint to the box. Please PM with payment info for the plate and hardware. Also any advice would be greatly appreciated. Thanks

11-08-2019, 12:46 AM	#866
T and S Registered User Join Date: Dec 2013 Location: Oak Ridge, Mo. Posts: 301	Re: Power Steering Adapter Plates Captainfab I need an adapter plate for a power steering box for a 1966 C-10. Also, will a collapsible intermediate shaft work with the power steering box on a 66'. I know I will have to cut off and modify the steering shaft at the column. Please send me PM on ordering info. Thanks !! __________________ If you don't like this pound sand .....

11-08-2019, 07:45 PM	#868
T and S Registered User Join Date: Dec 2013 Location: Oak Ridge, Mo. Posts: 301	Re: Power Steering Adapter Plates Payment and shipping info sent through paypal - Thanks !! __________________ If you don't like this pound sand .....

11-08-2019, 11:40 PM	#869
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Power Steering Adapter Plates Payment received. I will ship your order on Tuesday since Monday is Veterans Day. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

11-16-2019, 12:42 PM	#870
T and S Registered User Join Date: Dec 2013 Location: Oak Ridge, Mo. Posts: 301	Re: Power Steering Adapter Plates Parts received - Thanks ! __________________ If you don't like this pound sand .....



Register or Log In To remove these advertisements.

11-17-2019, 12:16 AM	#871
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Power Steering Adapter Plates Thank you for the purchase __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

12-26-2019, 10:59 PM	#874
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Power Steering Adapter Plates Due to an increase in the cost of the laser cutting, I have had to increase the cost of the steering box adapter plates. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

01-02-2020, 12:19 PM	#875
Dieman63 Registered User Join Date: Mar 2019 Location: Mineral wells,Texas Posts: 2	Re: Power Steering Adapter Plates PM sent

Register or Log In To remove these advertisements.