Extreme Powder Coating '65 C-10 Shop Truck - Page 35 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kart34 · 07-03-2013, 04:29 PM

The rivets area race car deal... Allstar Performance exploding rivets no backer needed

Also talked to Blueprint Engines. just have to change out the pan from the 327.. ???

kart34 · 07-07-2013, 08:54 PM

Just got home from Good-Guys Heartland Nationals.. got to see a few forum buddys.. It was good to get Low-Lark out for a cruise..

**Captainfab** · 07-13-2013, 02:07 AM

I was thinking that your 383 is built with the later model one piece rear main seal block. I assume that is the main reason the 327 flywheel wouldn't bolt up. If that is the case, then the 327 oil pan will not fit the later model block with the one piece rear main seal. You will also need to be sure a different pan will have enough clearance for the 3.75" stroke.

Quote:

Originally Posted by kart34

Also talked to Blueprint Engines. just have to change out the pan from the 327.. ???

ChickenCityHotRods · 07-08-2013, 08:07 AM

Are you going to have the truck at Columbus Good-Guys this weekend?

McMurphy · 07-08-2013, 01:58 PM

Hmmmmmmm

That under dash decking/plate looks smooth....
I wonder .....

creep · 07-09-2013, 08:13 AM

Quote:

Originally Posted by ChickenCityHotRods

Are you going to have the truck at Columbus Good-Guys this weekend?

Ditto. Dieing to see this truck in person. Maybe even snap some pics of mine next to it.

Posted via Mobile Device

ChickenCityHotRods · 07-10-2013, 10:23 AM

Quote:

Originally Posted by creep

Ditto. Dieing to see this truck in person. Maybe even snap some pics of mine next to it.

Posted via Mobile Device

Hey creep, where do you park? I missed seeing your truck last year and wanna make sure I get to check it out.

creep · 07-10-2013, 02:48 PM

It changes every year. Usually where ever I can find a spot. Last year I was able to squeeze in by grumpy over near the pavilions on Friday and in the judged section on Saturday. I'll post on here where I find a spot to cram it.

creep · 07-12-2013, 11:20 AM

I got a spot at the far end of the show on the path around the pavilions.
Posted via Mobile Device

creep · 07-13-2013, 09:16 AM

Quote:

Originally Posted by ChickenCityHotRods

Hey creep, where do you park? I missed seeing your truck last year and wanna make sure I get to check it out.

Today I'm in the homebuilt haulers section of the special feature area. Wanted to park close to the spectator parking so my friends don't have to walk 20 miles back to the cars after the show.
Posted via Mobile Device

gofastnut · 07-13-2013, 12:22 PM

I agree with Captain Fab, I'm not sure that's going to work. Maybe a stock pan from a Camaro would work?

kart34 · 07-15-2013, 01:54 PM

Good Afternoon
This is Tiffany, Kart's daughter.

He asked to post an update. Unfortunately, today the update is not about the C-10.
Greg, you may know him as kart34, was admitted to the hospital last Monday evening after going in with a severe headache, fatigue, and swollen lymph nodes.
After blood tests it was confirmed that he has Leukemia. He will be admitted for 4 weeks.

Greg has been receiving 24 hour chemotherapy treatments and is responding very well. His last treatment will be on Wednesday. He is a good patient and let me tell you the staff really loves him there. Greg has been feeling well on the chemo with little to NO side effects. He is also receiving blood transfusions to keep his counts up.

He is at Gundersen Lutheran Hospital in La Crosse WI.

Prayers and cards are appreciated, no plants or fruits as they carry microorganisms and can be harmful.

likaroc13 · 07-15-2013, 02:16 PM

Quote:

Originally Posted by kart34

Good Afternoon
This is Tiffany, Kart's daughter.

He asked to post an update. Unfortunately, today the update is not about the C-10.
Greg, you may know him as kart34, was admitted to the hospital last Monday evening after going in with a severe headache, fatigue, and swollen lymph nodes.
After blood tests it was confirmed that he has Leukemia. He will be admitted for 4 weeks.

Greg has been receiving 24 hour chemotherapy treatments and is responding very well. His last treatment will be on Wednesday. He is a good patient and let me tell you the staff really loves him there. Greg has been feeling well on the chemo with little to NO side effects. He is also receiving blood transfusions to keep his counts up.

He is at Gundersen Lutheran Hospital in La Crosse WI.

Prayers and cards are appreciated, no plants or fruits as they carry microorganisms and can be harmful.

Wow, really hate to hear this. Thoughts & prayers definitely headed your way Greg (& family/friends). No doubt your dad was an inspiration to you all throughout his battle with cancer. I know he was declared cancer free, & I pray that he continues to beat it. Just the same, I pray for the Lord's healing hand upon you Greg. Thank you Tiffany for the post, & ya'll keep us updated. God Bless!

Snowbound · 07-15-2013, 02:23 PM

So sorry to hear that. Thoughts and prayers coming your way.
Posted via Mobile Device

hotrod1 · 07-15-2013, 02:47 PM

My thoughts go out to him.

**DURG** · 07-15-2013, 04:29 PM

Good wishes coming from Maine too!

**Palf70Step** · 07-15-2013, 05:01 PM

Tiffany, tell him he is in ours prayers.

Scottshotrods · 07-15-2013, 05:06 PM

Greg hope you get better soon so you can get your truck done and enjoy it

Justin

creep · 07-15-2013, 05:30 PM

Get well buddy! We already miss you around here.

jmccully · 07-15-2013, 05:33 PM

Get well soon!

jimmydean · 07-15-2013, 05:56 PM

Get well, brother.

Modges'66 · 07-15-2013, 08:06 PM

Wow!
I am in total awe right now!
GET WELL SOON!

Modges'66 · 07-15-2013, 08:07 PM

Wow!
I am in total awe right now!
GET WELL SOON!

ChickenCityHotRods · 07-15-2013, 10:24 PM

You guys are in our prayers. Wishing you a speedy recovery.
Posted via Mobile Device
Posted via Mobile Device

**FRENCHBLUE72** · 07-15-2013, 10:30 PM

Hope for a speedy recovery.... In my prayer s
Posted via Mobile Device

07-03-2013, 04:29 PM	#1
kart34 Registered User Join Date: Jul 2009 Location: Blooming Prairie, Minnesota Posts: 673	Re: Extreme Powder Coating '65 C-10 Shop Truck The rivets area race car deal... Allstar Performance exploding rivets no backer needed Also talked to Blueprint Engines. just have to change out the pan from the 327.. ??? __________________ edited by staff

07-07-2013, 08:54 PM	#2
kart34 Registered User Join Date: Jul 2009 Location: Blooming Prairie, Minnesota Posts: 673	Re: Extreme Powder Coating '65 C-10 Shop Truck Just got home from Good-Guys Heartland Nationals.. got to see a few forum buddys.. It was good to get Low-Lark out for a cruise.. __________________ edited by staff

07-08-2013, 08:07 AM	#4
ChickenCityHotRods Registered User Join Date: Oct 2012 Location: Gainesville Ga Posts: 210	Re: Extreme Powder Coating '65 C-10 Shop Truck Are you going to have the truck at Columbus Good-Guys this weekend? __________________ Twin Turbo and Dropmember equipped http://67-72chevytrucks.com/vboard/s...d.php?t=586662 Follow us on Instagram @CHICKENCITYHOTRODS

07-08-2013, 01:58 PM	#5
McMurphy Registered User Join Date: Sep 2011 Location: Tacoma, WA Posts: 2,425	Re: Extreme Powder Coating '65 C-10 Shop Truck Hmmmmmmm That under dash decking/plate looks smooth.... I wonder ..... __________________ Michael McMurphy My 66 Stepside My 64 Tow Truck My 66 Tempest Table Of Contents Added to Page1

07-10-2013, 02:48 PM	#8
creep Registered Loser Join Date: Jun 2009 Location: Elyria, OH Posts: 1,523	Re: Extreme Powder Coating '65 C-10 Shop Truck It changes every year. Usually where ever I can find a spot. Last year I was able to squeeze in by grumpy over near the pavilions on Friday and in the judged section on Saturday. I'll post on here where I find a spot to cram it. __________________ ((..)) ((0)) '63 GMC lwb, 383, th350, lays frame, genuine patina. The Build Thread - http://67-72chevytrucks.com/vboard/s...d.php?t=374267 '88 Astro cargo bagged, shaved, phantom grille. SOLD '50 Chevy 2 door sedan awaiting attention. 2014 Silverado Ext cab, 5.3, daily driver.

07-12-2013, 11:20 AM	#9
creep Registered Loser Join Date: Jun 2009 Location: Elyria, OH Posts: 1,523	Re: Extreme Powder Coating '65 C-10 Shop Truck I got a spot at the far end of the show on the path around the pavilions. Posted via Mobile Device __________________ ((..)) ((0)) '63 GMC lwb, 383, th350, lays frame, genuine patina. The Build Thread - http://67-72chevytrucks.com/vboard/s...d.php?t=374267 '88 Astro cargo bagged, shaved, phantom grille. SOLD '50 Chevy 2 door sedan awaiting attention. 2014 Silverado Ext cab, 5.3, daily driver.

07-13-2013, 12:22 PM	#11
gofastnut Registered User Join Date: Feb 2011 Location: Williams, CA Posts: 760	Re: Extreme Powder Coating '65 C-10 Shop Truck I agree with Captain Fab, I'm not sure that's going to work. Maybe a stock pan from a Camaro would work? __________________ Jeff 96 C3500 Crew Cab Long bed (Waiting on Cool Name) 64 C-10 shortie stepside, "Ole Brownie" C-10 Club My achingly slow build: http://67-72chevytrucks.com/vboard/s...d.php?t=508345

07-15-2013, 01:54 PM	#12
kart34 Registered User Join Date: Jul 2009 Location: Blooming Prairie, Minnesota Posts: 673	Re: Extreme Powder Coating '65 C-10 Shop Truck Good Afternoon This is Tiffany, Kart's daughter. He asked to post an update. Unfortunately, today the update is not about the C-10. Greg, you may know him as kart34, was admitted to the hospital last Monday evening after going in with a severe headache, fatigue, and swollen lymph nodes. After blood tests it was confirmed that he has Leukemia. He will be admitted for 4 weeks. Greg has been receiving 24 hour chemotherapy treatments and is responding very well. His last treatment will be on Wednesday. He is a good patient and let me tell you the staff really loves him there. Greg has been feeling well on the chemo with little to NO side effects. He is also receiving blood transfusions to keep his counts up. He is at Gundersen Lutheran Hospital in La Crosse WI. Prayers and cards are appreciated, no plants or fruits as they carry microorganisms and can be harmful. __________________ edited by staff

07-15-2013, 02:23 PM	#14
Snowbound Registered User Join Date: Aug 2002 Location: Westbank, BC Posts: 401	Re: Extreme Powder Coating '65 C-10 Shop Truck So sorry to hear that. Thoughts and prayers coming your way. Posted via Mobile Device __________________ 1965 Chevy Short Box Stepside, 230 - 3 speed, 4:11 gears, original paint rust free survivor. Now sporting a 383 SBC and TKO-600

07-15-2013, 02:47 PM	#15
hotrod1 56 - autocross Join Date: Apr 2010 Location: Camarillo, Ca Posts: 1,121	Re: Extreme Powder Coating '65 C-10 Shop Truck My thoughts go out to him.

07-15-2013, 04:29 PM	#16
DURG Registered User Join Date: May 2012 Location: Scarborough ME. Posts: 413	Re: Extreme Powder Coating '65 C-10 Shop Truck Good wishes coming from Maine too! __________________ 1962 Impala SS 383 stroker Tremec TKO 600 Black 1965 SWB BBW Fleetside Custom Cab PB Coilover setup Black 2003 100th Anniversary Road King Classic Silver Black

07-15-2013, 05:01 PM	#17
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,725	Re: Extreme Powder Coating '65 C-10 Shop Truck Tiffany, tell him he is in ours prayers. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

07-15-2013, 05:06 PM	#18
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: Extreme Powder Coating '65 C-10 Shop Truck Greg hope you get better soon so you can get your truck done and enjoy it Justin

07-15-2013, 05:30 PM	#19
creep Registered Loser Join Date: Jun 2009 Location: Elyria, OH Posts: 1,523	Re: Extreme Powder Coating '65 C-10 Shop Truck Get well buddy! We already miss you around here. __________________ ((..)) ((0)) '63 GMC lwb, 383, th350, lays frame, genuine patina. The Build Thread - http://67-72chevytrucks.com/vboard/s...d.php?t=374267 '88 Astro cargo bagged, shaved, phantom grille. SOLD '50 Chevy 2 door sedan awaiting attention. 2014 Silverado Ext cab, 5.3, daily driver.

07-15-2013, 05:33 PM	#20
jmccully Registered User Join Date: Sep 2012 Location: louisville,ms Posts: 36	Re: Extreme Powder Coating '65 C-10 Shop Truck Get well soon!



Register or Log In To remove these advertisements.

07-15-2013, 05:56 PM	#21
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: Extreme Powder Coating '65 C-10 Shop Truck Get well, brother. __________________ New Project: 1966 LWB C20 Plans: 1/2 ton conversion Dropmember front Dropmember rear Corvette discs Restored raised bed http://67-72chevytrucks.com/vboard/s....php?p=4295210

07-15-2013, 08:06 PM	#22
Modges'66 Registered User Join Date: Feb 2012 Location: Grand Rapids, Michigan, otherwise known as Beer City U.S.A. Posts: 1,081	Re: Extreme Powder Coating '65 C-10 Shop Truck Wow! I am in total awe right now! GET WELL SOON! __________________ My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=512904

07-15-2013, 08:07 PM	#23
Modges'66 Registered User Join Date: Feb 2012 Location: Grand Rapids, Michigan, otherwise known as Beer City U.S.A. Posts: 1,081	Re: Extreme Powder Coating '65 C-10 Shop Truck Wow! I am in total awe right now! GET WELL SOON! __________________ My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=512904

07-15-2013, 10:24 PM	#24
ChickenCityHotRods Registered User Join Date: Oct 2012 Location: Gainesville Ga Posts: 210	Re: Extreme Powder Coating '65 C-10 Shop Truck You guys are in our prayers. Wishing you a speedy recovery. Posted via Mobile Device Posted via Mobile Device __________________ Twin Turbo and Dropmember equipped http://67-72chevytrucks.com/vboard/s...d.php?t=586662 Follow us on Instagram @CHICKENCITYHOTRODS

07-15-2013, 10:30 PM	#25
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: Extreme Powder Coating '65 C-10 Shop Truck Hope for a speedy recovery.... In my prayer s Posted via Mobile Device __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

Register or Log In To remove these advertisements.