What did you do to your truck today part II. - Page 35 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Chevy Fleetside** · 06-23-2014, 12:01 AM

I loaded my sons bike and mine and drove it to a friends house in Lafayette Ca to install a ceiling fan and then go for a ride. OH yeah had to feed her too.

donthekawguy · 06-23-2014, 12:19 AM

Got the drivers side LCA, spring and spindle on. Had to drill out the holes for the bigger u bolts. All the hard stuff done! Tomorrow calipers new pads, dust sheild, new ruber brake lines. I found out I need to shorten my steering shafy about an inch but I'll get to that later.

Frizzle Fry · 06-23-2014, 01:47 AM

New buddy bucket covers installed (with heaters).

Woogeroo · 06-23-2014, 02:12 AM

Oooh, with heaters... fancy.

-W

robber grin · 06-23-2014, 08:31 AM

Quote:

Originally Posted by Frizzle Fry

New buddy bucket covers installed (with heaters).

NICE truck Friz! Seats look great too.

**Palf70Step** · 06-23-2014, 12:05 PM

WATSON403 · 06-23-2014, 07:32 PM

http://67-72chevytrucks.com/vboard/a...1&d=1403566326 new shifter knob

**pdxhall** · 06-23-2014, 10:50 PM

Quote:

Originally Posted by Frizzle Fry

New buddy bucket covers installed (with heaters).

It's great to see the truck back on the pages. The seats look fantastic.

BADAZ chevy guy · 06-23-2014, 10:57 PM

Quote:

Originally Posted by Frizzle Fry

New buddy bucket covers installed (with heaters).

How did you get the heaters? I want to do this also.

TJ's Chevy · 06-24-2014, 12:31 PM

Ordered a set of 6 Ross Racing custom pistons for my 292 I6 today. 6 pistons with rings and wrist pins. Specs:

Ross Forged piston

18 CC dish

.40 over

Piston weight 542 grams

These will give me about 9.5.1 compression. Also nice cause they're made for the stock rod length which means I can use stock rods. So..can't wait for them to show up!

Frizzle Fry · 06-24-2014, 01:22 PM

Thanks guys. Here are the heaters I went with.

Grizz1963 · 06-24-2014, 01:44 PM

Quote:

Originally Posted by mjh1965

Hi I got a delivery today one box arrived from the states. It had my cab floor supports . The inner and outer rockers are to follow

And even better I got my tickets for my holiday ( vacation) to Florida so big cases at the ready for a shopping list , as I am going to be in Florida in October and the NSRA Southeast Street Rod Nationals in Tampa are on . Has any body been and is there many stalls to get parts

I am quite jealous of you attending these shows.

Nicola suggested you find someone from the forums who is going, and attach yourself to the underside of their truck on the entry.

Maybe a bit like this....... like an illegal alien

steveb64 · 06-24-2014, 06:58 PM

Had a little fun on the 1/8 mile.
http://youtu.be/NtqoDmc4ONk

markeb01 · 06-24-2014, 07:47 PM

Quote:

Originally Posted by steveb64

Had a little fun on the 1/8 mile.
http://youtu.be/NtqoDmc4ONk

Very cool - thanks for sharing. I prefer your version of Christmas Tree also!!

TJ's Chevy · 06-24-2014, 09:37 PM

Quote:

Originally Posted by steveb64

Had a little fun on the 1/8 mile.
http://youtu.be/NtqoDmc4ONk

Awesome steve!!! That fender looks good to! lol!

hopped up · 06-24-2014, 09:51 PM

Quote:

Originally Posted by steveb64

Had a little fun on the 1/8 mile.
http://youtu.be/NtqoDmc4ONk

Whoa that 4x4 rubs good! But you got him on both runs. Any times SLIPS? Or just for bragging rights

steveb64 · 06-24-2014, 10:32 PM

Quote:

Originally Posted by hopped up

Whoa that 4x4 rubs good! But you got him on both runs. Any times SLIPS? Or just for bragging rights

All just for fun. I could not get any traction off the line. Never did look at the speedo, hoping I would see it on the video but can't make it out.
Will definitely be going back in the fall.

**Chevy Fleetside** · 06-25-2014, 08:23 PM

took it to the muffler shop and now it is not blowing my ears out in the cab anymore. Sounds good at the back and quiet in the cab.

glos55 · 06-26-2014, 05:46 AM

Aligned rearend with new adjustable pan hard bar

schpeen · 06-26-2014, 08:44 AM

going to install new vent windows and new felts today. I will post up pics when done.

JBX66 · 06-26-2014, 04:43 PM

Quote:

Originally Posted by T.J. MCCAULEY

I coulda told you it was a 230 pimpston...if only I had gotten here on time! lol Hey...YOU shoulda told Him it was a 230!!! lol! How would I know...first year of 292...250 not out until 66...194 not available until 66...so..leaves the
1964 hp specs...they changed as year went. 153 4 cyl discontinued in 64 or 65.

153 4 cyl 85 hp

230 6 cyl 120 hp

230 6 cly 125 hp ( yea...2 230's were available.)

292 6 cyl 145 hp

283 8 cyl 145 hp only available engines for 64 in the C10 and C20 trucks I believe. There..now so more knowledge fer ya. LOL!

Whoah whoah whoah. Back up the truck. Chevy put 4 cylinders in these trucks? And what were the differences between the 2 230 engines?

**Chevy Fleetside** · 06-26-2014, 05:12 PM

the 283 was 175 horse power. At leat that is what my build sheet said.

**Chevy Fleetside** · 06-26-2014, 05:13 PM

Well I figured out my turning more left then right today so I fixed that and brought it in for an alighnment.

crowdaddy · 06-26-2014, 08:02 PM

Wire brushed a hubcap.

Put a halogen head lamp in...

**Chevy Fleetside** · 06-26-2014, 08:36 PM

I just sent my registration in for Hot San Jose Nights. Anyone want to join me just send in yours. I will be doing the Friday Night Cruize to the Drive In with my son also. http://www.hotsanjosenights.com/

06-23-2014, 12:01 AM	#851
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,782	Re: What did you do to your truck today part II. I loaded my sons bike and mine and drove it to a friends house in Lafayette Ca to install a ceiling fan and then go for a ride. OH yeah had to feed her too. Attached Images __________________ "A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536

06-23-2014, 12:19 AM	#852
donthekawguy Registered User Join Date: Aug 2012 Location: Rathdrum ID Posts: 1,129	Re: What did you do to your truck today part II. Got the drivers side LCA, spring and spindle on. Had to drill out the holes for the bigger u bolts. All the hard stuff done! Tomorrow calipers new pads, dust sheild, new ruber brake lines. I found out I need to shorten my steering shafy about an inch but I'll get to that later. __________________ 66 shorty

06-23-2014, 01:47 AM	#853
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: What did you do to your truck today part II. New buddy bucket covers installed (with heaters). Attached Images

06-23-2014, 02:12 AM	#854
Woogeroo Registered User Join Date: Aug 2003 Location: tool box Posts: 3,115	Re: What did you do to your truck today part II. Oooh, with heaters... fancy. -W

06-23-2014, 12:05 PM	#856
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: What did you do to your truck today part II. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

06-23-2014, 07:32 PM	#857
WATSON403 Registered User Join Date: Apr 2014 Location: Calgary Alberta Canada Posts: 77	Re: What did you do to your truck today part II. http://67-72chevytrucks.com/vboard/a...1&d=1403566326 new shifter knob Attached Images

06-24-2014, 12:31 PM	#860
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: What did you do to your truck today part II. Ordered a set of 6 Ross Racing custom pistons for my 292 I6 today. 6 pistons with rings and wrist pins. Specs: Ross Forged piston 18 CC dish .40 over Piston weight 542 grams These will give me about 9.5.1 compression. Also nice cause they're made for the stock rod length which means I can use stock rods. So..can't wait for them to show up! __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

06-24-2014, 01:22 PM	#861
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: What did you do to your truck today part II. Thanks guys. Here are the heaters I went with. Attached Images

06-24-2014, 06:58 PM	#863
steveb64 Registered User Join Date: Oct 2009 Location: Moline, IL Posts: 157	Re: What did you do to your truck today part II. Had a little fun on the 1/8 mile. http://youtu.be/NtqoDmc4ONk Attached Images

06-25-2014, 08:23 PM	#868
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,782	Re: What did you do to your truck today part II. took it to the muffler shop and now it is not blowing my ears out in the cab anymore. Sounds good at the back and quiet in the cab. __________________ "A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536

06-26-2014, 05:46 AM	#869
glos55 Registered User Join Date: Nov 2010 Location: Kalamazoo, MI Posts: 1,008	Re: What did you do to your truck today part II. Aligned rearend with new adjustable pan hard bar Attached Images __________________ LIFE IS SHORT HAVE FUN

06-26-2014, 08:44 AM	#870
schpeen Registered User Join Date: Jun 2014 Location: fort lauderdale, florida Posts: 511	Re: What did you do to your truck today part II. going to install new vent windows and new felts today. I will post up pics when done.

06-26-2014, 05:12 PM	#872
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,782	Re: What did you do to your truck today part II. the 283 was 175 horse power. At leat that is what my build sheet said. __________________ "A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536

06-26-2014, 05:13 PM	#873
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,782	Re: What did you do to your truck today part II. Well I figured out my turning more left then right today so I fixed that and brought it in for an alighnment. Attached Images __________________ "A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536

06-26-2014, 08:02 PM	#874
crowdaddy Registered User Join Date: May 2014 Location: lawton mi Posts: 90	Re: What did you do to your truck today part II. Wire brushed a hubcap. Put a halogen head lamp in... Attached Images



Register or Log In To remove these advertisements.

06-26-2014, 08:36 PM	#875
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,782	Re: What did you do to your truck today part II. I just sent my registration in for Hot San Jose Nights. Anyone want to join me just send in yours. I will be doing the Friday Night Cruize to the Drive In with my son also. http://www.hotsanjosenights.com/ __________________ "A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536

Register or Log In To remove these advertisements.