What did you do to your truck today? - Page 353 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

WhippinSaw · 11-28-2013, 11:05 PM

[QUOTE=La Zona Imagery;6393181]My chrome grill and bumper came in the mail yesterday, so I installed them today. Damn the original bumper bolts were all rusted and frozen. I had to cut them off with a wheel cutter.

Looks great with the chrome wheels, definitely worth the money, x2 on the side trim, more bling the better

mud.man.rj · 11-29-2013, 01:50 AM

What a big difference a chrome gril, bezels and bumper make, well worth it.

Trsmotrhed · 11-29-2013, 10:31 AM

[QUOTE=La Zona Imagery;6393181]My chrome grill and bumper came in the mail yesterday, so I installed them today. Damn the original bumper bolts were all rusted and frozen. I had to cut them off with a wheel cutter.

before:

Where did you order the parts from? Did they fit good?
Looks great.

endlessearth · 11-29-2013, 03:45 PM

The new 355 block with the heads cannibalized from my original 283 block is painted and nearly ready for final assembly and install.

Mack B · 11-29-2013, 08:42 PM

Quote:

Originally Posted by endlessearth

The new 355 block with the heads cannibalized from my original 283 block is painted and nearly ready for final assembly and install.

I love the way that looks, I've considered doing the same, what's your plan for the Pcv valve?

endlessearth · 11-29-2013, 09:19 PM

Quote:

Originally Posted by Mack B

I love the way that looks, I've considered doing the same, what's your plan for the Pcv valve?

My friend and hot rod builder, Chip Quinn here in Phoenix, drilled the back of the manifold and built a baffle underneath. There will be a vent at the fill tube. I would give you more details but I am out of my league. Chip reads this thread and will chime in I am sure.

groundbound64 · 11-30-2013, 01:32 AM

My buddy and I worked on my air ride. Getting so close to being done.

groundbound64 · 11-30-2013, 01:36 AM

back

groundbound64 · 11-30-2013, 01:38 AM

inside bed

mud.man.rj · 11-30-2013, 02:28 AM

Nice work, really tuckin the rears well.

lowlife4life · 11-30-2013, 07:06 AM

Man that looks sick tucked in the step.
Got one box side shortened up so I can start my 4 link and have the wheel entered. Still have a lot of work to make the tire fit properly.

lowlife4life · 11-30-2013, 07:10 AM

Will sit here with no air. And the pinch weld is going off the rocker . Don't see changing a flat to be very fun!

mud.man.rj · 11-30-2013, 03:17 PM

Changing a flat, that is funny, just take the box off. Everything has something about it doesn't it, just like a lifted truck, a give and take, but all fun and cool at the same time.

A.T. RockDriller · 11-30-2013, 03:32 PM

Quote:

Originally Posted by mud.man.rj

Changing a flat, that is funny, just take the box off. Everything has something about it doesn't it, just like a lifted truck, a give and take, but all fun and cool at the same time.

That's why they're called "run-flats"..

**joedoh** · 11-30-2013, 06:12 PM

make the bed tilt!

I have 31" rear tires, and I was perfectly happy with wingnuts on the bed mounting bolts

the guy building the backhalf decided it should tilt.

19666Trucker · 11-30-2013, 07:26 PM

Got the spot mirrors installed hope this helps with blind spots.

Dillon Rock · 11-30-2013, 08:50 PM

Just hauled a 1/2 cord of wood today in mine, probably the first heavy load that truck's hauled in maybe 10-15 years, lol. Did good too, gonna install my spotlight tomorrow and maybe work on the cab lights later this week.

wjjeeper · 12-01-2013, 12:25 AM

Nothing..... Waiting on parts.

Softpatch · 12-01-2013, 12:49 AM

Wow looking at your guys pictures look like I'm way out of my league.

Just put in a few gallon of fuel in warmed it up worked the heater/ defrost
went for a 3 mile road trip while working the kickdown/passing gear all the time think about pulling the windshield and sealing the drip rail.....sorry
.
.
.
.
.
.
.

.

sodly · 12-01-2013, 02:10 PM

Quote:

Originally Posted by 19666Trucker

Got the spot mirrors installed hope this helps with blind spots.

Can you show the other side of the mirror? What size is it and where did you get it? Thanks.

RANDY COX · 12-01-2013, 05:38 PM

installed my new hood

19666Trucker · 12-01-2013, 06:38 PM

Quote:

Originally Posted by sodly

Can you show the other side of the mirror? What size is it and where did you get it? Thanks.

97802, trucklite, napa $12, they have a stainless too that #97872

19666Trucker · 12-01-2013, 06:44 PM

Hope these are right side up

T2vigil · 12-01-2013, 07:01 PM

I had a long talk with Santa and Tom Langdon and they thought I was good enough for a new Split cast manifold for my 250 along with the new Webber 2 barrel carb with adaptors. This will keep me busy during the Christmas Holidays.

TJ's Chevy · 12-01-2013, 08:40 PM

Sat and thought about future plans for it.

11-28-2013, 11:05 PM	#8801
WhippinSaw Registered User Join Date: Aug 2012 Location: Lisle Illinois Posts: 602	Re: What did you do to your truck today? [QUOTE=La Zona Imagery;6393181]My chrome grill and bumper came in the mail yesterday, so I installed them today. Damn the original bumper bolts were all rusted and frozen. I had to cut them off with a wheel cutter. Looks great with the chrome wheels, definitely worth the money, x2 on the side trim, more bling the better __________________ 1963 Fleet Side cab, Converted Fleet Side Barden bumper, Step Side in the middle.

11-29-2013, 01:50 AM	#8802
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: What did you do to your truck today? What a big difference a chrome gril, bezels and bumper make, well worth it. __________________ 1987 Green n Green machine. 5.0 4spd std. 7" lift w 35's.

11-29-2013, 10:31 AM	#8803
Trsmotrhed Registered User Join Date: Mar 2012 Location: Pueblo West, Colorado Posts: 430	Re: What did you do to your truck today? [QUOTE=La Zona Imagery;6393181]My chrome grill and bumper came in the mail yesterday, so I installed them today. Damn the original bumper bolts were all rusted and frozen. I had to cut them off with a wheel cutter. before: Where did you order the parts from? Did they fit good? Looks great. __________________ Sold the 63 and have a 68 now. 63 SWB C10 LT1/4L60E, PS, PB, Disk Brakes, CPP 4" drop coil rear, 2.5" drop spindle w/ 1" drop coil. slotted rotors, front and rear sway bars. 18"x8" Cragar SS w/ 245/45R18 http://67-72chevytrucks.com/vboard/s...d.php?t=544174

11-29-2013, 03:45 PM	#8804
endlessearth Registered User Join Date: May 2013 Location: Scottsdale, AZ Posts: 373	Re: What did you do to your truck today? The new 355 block with the heads cannibalized from my original 283 block is painted and nearly ready for final assembly and install.

11-30-2013, 01:32 AM	#8807
groundbound64 Registered User Join Date: Oct 2012 Location: Greely, On, Canada Posts: 89	Re: What did you do to your truck today? My buddy and I worked on my air ride. Getting so close to being done. Attached Images __________________ 64 C10 Stepside 350/4psd Driver/Project on air. Dom bags, Dual Viair and AccuAir 08 Ford F150 Limited- F-word ! Daily Driver .......................____ ..........._______l/ \____ ...........\|_/(0)\_ll____/(0)_l.

11-30-2013, 01:36 AM	#8808
groundbound64 Registered User Join Date: Oct 2012 Location: Greely, On, Canada Posts: 89	Re: What did you do to your truck today? back Attached Images __________________ 64 C10 Stepside 350/4psd Driver/Project on air. Dom bags, Dual Viair and AccuAir 08 Ford F150 Limited- F-word ! Daily Driver .......................____ ..........._______l/ \____ ...........\|_/(0)\_ll____/(0)_l.

11-30-2013, 01:38 AM	#8809
groundbound64 Registered User Join Date: Oct 2012 Location: Greely, On, Canada Posts: 89	Re: What did you do to your truck today? inside bed Attached Images __________________ 64 C10 Stepside 350/4psd Driver/Project on air. Dom bags, Dual Viair and AccuAir 08 Ford F150 Limited- F-word ! Daily Driver .......................____ ..........._______l/ \____ ...........\|_/(0)\_ll____/(0)_l.

11-30-2013, 02:28 AM	#8810
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: What did you do to your truck today? Nice work, really tuckin the rears well. __________________ 1987 Green n Green machine. 5.0 4spd std. 7" lift w 35's.

11-30-2013, 07:06 AM	#8811
lowlife4life Registered User Join Date: Jul 2013 Location: grande prairie alberta Posts: 324	Re: What did you do to your truck today? Man that looks sick tucked in the step. Got one box side shortened up so I can start my 4 link and have the wheel entered. Still have a lot of work to make the tire fit properly. Attached Images

11-30-2013, 07:10 AM	#8812
lowlife4life Registered User Join Date: Jul 2013 Location: grande prairie alberta Posts: 324	Re: What did you do to your truck today? Will sit here with no air. And the pinch weld is going off the rocker . Don't see changing a flat to be very fun! Attached Images

11-30-2013, 03:17 PM	#8813
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: What did you do to your truck today? Changing a flat, that is funny, just take the box off. Everything has something about it doesn't it, just like a lifted truck, a give and take, but all fun and cool at the same time. __________________ 1987 Green n Green machine. 5.0 4spd std. 7" lift w 35's.

11-30-2013, 06:12 PM	#8815
joedoh Senior Member Join Date: May 2007 Location: Doodah Kansas Posts: 7,774	Re: What did you do to your truck today? make the bed tilt! I have 31" rear tires, and I was perfectly happy with wingnuts on the bed mounting bolts the guy building the backhalf decided it should tilt. __________________ the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393

11-30-2013, 07:26 PM	#8816
19666Trucker Registered User Join Date: May 2013 Location: Scottsdale, Az Posts: 245	Re: What did you do to your truck today? Got the spot mirrors installed hope this helps with blind spots. Attached Images

11-30-2013, 08:50 PM	#8817
Dillon Rock Registered User Join Date: Dec 2012 Location: Bangor, Michigan Posts: 375	Re: What did you do to your truck today? Just hauled a 1/2 cord of wood today in mine, probably the first heavy load that truck's hauled in maybe 10-15 years, lol. Did good too, gonna install my spotlight tomorrow and maybe work on the cab lights later this week. __________________ That's the thing about a Chevrolet, no matter how they look, whether it be a trailer queen or a good ol' used farm truck, no other truck on the road will always look that damn good wearing a Bowtie.

12-01-2013, 12:25 AM	#8818
wjjeeper Registered User Join Date: Sep 2013 Location: Cold Lake, AB Posts: 402	Re: What did you do to your truck today? Nothing..... Waiting on parts. __________________ Follow me on Instagram http://instagram.com/ryno._b



Register or Log In To remove these advertisements.

12-01-2013, 12:49 AM	#8819
Softpatch Registered User Join Date: Sep 2013 Location: Vashon WA Posts: 969	Re: What did you do to your truck today? Wow looking at your guys pictures look like I'm way out of my league. Just put in a few gallon of fuel in warmed it up worked the heater/ defrost went for a 3 mile road trip while working the kickdown/passing gear all the time think about pulling the windshield and sealing the drip rail.....sorry . . . . . . . .

12-01-2013, 05:38 PM	#8821
RANDY COX Registered User Join Date: Mar 2001 Location: RADFORD, VA Posts: 2,651	Re: What did you do to your truck today? installed my new hood __________________ 1964 BBC 402 4x4

12-01-2013, 06:44 PM	#8823
19666Trucker Registered User Join Date: May 2013 Location: Scottsdale, Az Posts: 245	Re: What did you do to your truck today? Hope these are right side up Attached Images

12-01-2013, 07:01 PM	#8824
T2vigil Registered User Join Date: Jan 2010 Location: Evensville, TN Posts: 236	Re: What did you do to your truck today? I had a long talk with Santa and Tom Langdon and they thought I was good enough for a new Split cast manifold for my 250 along with the new Webber 2 barrel carb with adaptors. This will keep me busy during the Christmas Holidays.

12-01-2013, 08:40 PM	#8825
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: What did you do to your truck today? Sat and thought about future plans for it. __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

Register or Log In To remove these advertisements.