![]() |
![]() |
#8851 |
Registered User
Join Date: Feb 2007
Location: Kansas
Posts: 148
|
Re: What did you do to your truck today?
pulled motor and trans (454-th400) out of downer 78 suburban, also pulled out fuel tank and outside mirrors. Was going to just pull it and stick it into the 65 1 ton camper, but soft plug above starter is starting to leak and rear main seal leaking. So decided to pull heads and replace all gaskets, seals and check out. Cam &lifters look good , cylinders and brgs look good, timing chain not so much! So gasket set, soft plugs, timing set, flywheel, and harmonic balancer ordered. will try to remember to take picks of assembly, forgot to take picks of removal and tear down.
__________________
![]() 71 GMC Long Bed, 454,factory everything, lowered, and shaved. 64 GMC Short Bed (great grandfathers truck) 65 Chevy 1 ton Dually a/c p/s p/b v8 auto 89 Jeep Cherokee 3" lift 79 MG Midget (My 7 year old vehicle) 29 Ford Model A Rat Rod (in the works) 86 pontiac fiero 2.5 manual18 year olds) 87 pontiac fiero SE 2.8 auto (18 year olds) 90 Mitsubishi eclipes turbo AWD (18 year olds) 69 BMW 1600 (wifes toy) |
![]() |
![]() |
#8852 | |
Registered User
Join Date: Nov 2009
Location: Galt, Calif
Posts: 2,437
|
Re: What did you do to your truck today?
Quote:
http://www.rodworx.com/product.php?item=766
__________________
`64 C10 vortec 350/350/373 posi `69 RS/SS 350/350/308 `37 Ford 406/350/324 traclock `68 Dart 370/904/323 suregrip |
|
![]() |
![]() |
#8853 |
Post Whore
![]() Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
|
Re: What did you do to your truck today?
Re-adjusted my rocker arms and put a new valve cover gasket today. Discovered a slightly bent pushrod....far from scary and a possibility of a blown head gasket. Still running strong though! Like a chevy does so well!
![]() ![]()
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw |
![]() |
![]() |
#8854 |
Registered User
Join Date: Feb 2007
Location: Kansas
Posts: 148
|
Re: What did you do to your truck today?
pressure washed under hood and transmission to get ready for installation.
__________________
![]() 71 GMC Long Bed, 454,factory everything, lowered, and shaved. 64 GMC Short Bed (great grandfathers truck) 65 Chevy 1 ton Dually a/c p/s p/b v8 auto 89 Jeep Cherokee 3" lift 79 MG Midget (My 7 year old vehicle) 29 Ford Model A Rat Rod (in the works) 86 pontiac fiero 2.5 manual18 year olds) 87 pontiac fiero SE 2.8 auto (18 year olds) 90 Mitsubishi eclipes turbo AWD (18 year olds) 69 BMW 1600 (wifes toy) |
![]() |
![]() |
#8855 |
Registered User
![]() Join Date: Nov 2010
Location: Kalamazoo, MI
Posts: 1,008
|
Re: What did you do to your truck today?
Starter is on and motor turns over
__________________
LIFE IS SHORT HAVE FUN |
![]() |
![]() |
#8856 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,529
|
Re: What did you do to your truck today?
Posting up on behalf of Martin my mate who cannot be bothered with posting, as he is too busy building
![]() ![]() ![]() ![]() ![]() His step sons twist and go scooter was stolen at work on Thursday evening at work, literally behind the filling station building where he works. So his manager gave him three days "off" to find another mode of transport, because he lives about 20 miles from where he works. This left martin holding the an, as he knows a bit and has the truck, his tow car that we used a few weeks ago to fetch the V8 engine and gearbox with is not well at the moment...... so the Chevy was put into service, doing about 200 miles on Saturday to go look at and ultimately buy another 125cc learner sized bike for Mikey. Little bike looks minute on the back, so hopefully the V-Rod will fill the space better when the truck is done. ![]() ![]() Truck used as security anchor for the little bike. ![]()
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
#8857 |
KEEP ON TRUCKIN'
![]() Join Date: Jun 2005
Location: Sterling, Va.
Posts: 5,731
|
Re: What did you do to your truck today?
Worked on gutting the interior of my cab, getting it ready to come off the frame.
__________________
JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 ![]() http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER" ![]() |
![]() |
![]() |
#8858 |
Registered User
Join Date: Jan 2013
Location: Imperial, MO
Posts: 999
|
Re: What did you do to your truck today?
I had a couple hours available today, so I swung by the shop and deleted the factory firewall holes for the engine harness, oil pressure line, and headlight/horn harness, along with a few other small holes (six holes total thus far). The engine harness and headlight/horn wiring will be relocated so that the wiring is hidden from view.
![]() |
![]() |
![]() |
#8859 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,529
|
Re: What did you do to your truck today?
Pics I did not have earlier.....
Martin had a tyre de-laminate last week, lost most of its tread. Then he got lucky on Ebay and bought two 1 inch white walls, almost new for £80,00 fitted....... now that is called making your own luck. ![]() ![]()
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
#8860 |
Registered User
Join Date: Dec 2011
Location: Creighton Sask. Canada
Posts: 4,121
|
Re: What did you do to your truck today?
Nice idea on getting rid of the firewall holes and hiding the wiring harness, have done a lot of that on builds and most customers are so happy with how clean it looks and don't exactly know what I did, but like the underhood a lot better. I usually don't tell them either.
__________________
1987 Green n Green machine. 5.0 4spd std. 7" lift w 35's. |
![]() |
![]() |
#8861 |
Registered User
Join Date: Dec 2011
Location: Creighton Sask. Canada
Posts: 4,121
|
Re: What did you do to your truck today?
Traded $2,000 labour on a TJ Jeep lift and engine mods for a 99 S10 ZR2 4x4 and did a quick going over on it and a few mods of parts I had saved then sold it for $2,800 cash to pay for my 40" Mud grapplers I ordered 2 weeks ago for my truck, have to do the barter system to keep the wife happy these days now that my twins are graduating this fall and leaving for school will be a bit low on cash. Next Mods will have to be thrifty.
![]() ![]() ![]() ![]() Mudman.
__________________
1987 Green n Green machine. 5.0 4spd std. 7" lift w 35's. |
![]() |
![]() |
#8862 |
Moderator
![]() Join Date: Dec 2012
Location: ON, Canada
Posts: 2,158
|
Re: What did you do to your truck today?
Wow, I hated slot mags in the 80s when I was in high school, and I love them now. Looking good, grizz!
|
![]() |
![]() |
#8863 |
Registered User
![]() Join Date: Sep 2006
Location: San Francisco
Posts: 4,780
|
Re: What did you do to your truck today?
Quote:
![]()
__________________
"A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536 |
![]() |
![]() |
#8864 |
Registered User
Join Date: Oct 2010
Location: Independence,KS
Posts: 1,477
|
Re: What did you do to your truck today?
What did I do to my truck today?.....Drove it! Just like every other day-the 'ol '65 daily driver is just that.
Been gone a while, re couping from surgery on my hand and the Mrs getting a 2nd total hip replacement this year(now has a matched set of shiny new ones, LOL) Did do a dual reservoir master cylinder upgrade and all new brake lines and hoses. Kept with the drum brakes. Had to opt out to the recommended ECM that Painless suggests for a Camaro. Mine was from the '91 Olds donor and wanted to keep setting an "intake air temp low" DTC(of which there was no sensor or harness for) Check engine light off all the time now, running great and getting and average 15 MPG, but that is all stop and go, in town only driving. Highway numbers get closer to 19 mpg,but lockup on the TH350C not always engaging. Switching to computer controlled 700R4 soon. |
![]() |
![]() |
#8865 |
Post Whore
![]() Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
|
Re: What did you do to your truck today?
Thought about mine today.....waiting for the future hotrod rebuild of the 6 banger!
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw |
![]() |
![]() |
#8866 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,529
|
Re: What did you do to your truck today?
This is a bit of a cross over reply.
I bought a 210 liter compressor from a mate for £100.00 a while ago, but the thing is £&%$$%£ Heavy. So I decided to add some wheels. Original plan was to buy four with single bolt fixing...... But then I said to Mickey next door that a shopping trolley would work well. He then got me a broken bakers trolley from a skip at a job he was on. So the trolley was the Tip Treasure. [img src="http://i294.photobucket.com/albums/mm90/niknakpix/Billybob178_zps45c5bf60.jpg" alt=" "] Said trolley ![]() Stripped wheels off. ![]() Had some 10mm steel plate to cut to size for mounting the wheels onto ![]() Was going to engineer and drill holes, recess the heads etc, to recycle the allen head screws and nuts, but decided it was a PITA not worth pursuing. So welded the holes onto the plates and tacked the corners and edges. ![]() Went out for the afternoon, getting home around 16.00 and then back to the garage. It was already getting dark, but then who needs light when you weld?? I used the small jack to lift the tank to the right height and a couple of magnets to hold the wheels in place. ![]() ![]() View from outside. ![]() JOB DONE......Mobile compressor. ![]() Close up time for today. ![]() Tomorrow I need to get under and about the truck to see what bits of patch panels I need to order in from the USA. Looking forward to getting on with the body work and of course paint in the new year.
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
#8867 |
Registered User
Join Date: Sep 2013
Location: Cold Lake, AB
Posts: 402
|
Re: What did you do to your truck today?
Today I took pictures of the truck and whored it up on this forum. Yesterday installed rear trac bar, lowering blocks and new u bolts.
|
![]() |
![]() |
#8868 |
Registered User
Join Date: Nov 2008
Location: Lacombe, LA
Posts: 2,772
|
Re: What did you do to your truck today?
Grizz,
You know if you ever get a flat on one of those compressor tires, its gonna be a bear to change. ![]()
__________________
http://s1299.photobucket.com/user/jb...23904108567829 |
![]() |
![]() |
#8869 |
Registered User
Join Date: Sep 2013
Location: Strawberry Arkansas
Posts: 1,137
|
Re: What did you do to your truck today?
Started running fuel lines on my 65.
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=605217 |
![]() |
![]() |
#8870 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,529
|
Re: What did you do to your truck today?
Opinions and advice sought please.
When I bought the truck, I knew it would need a complete resto and repaint to get it looking the way I want it to be. I originally had a colour change in mind to a traditional mint green and white combo, or a real farmer brown green colour with off white detailing. But within a week of buying the truck, I knew it would stay the "in your face" red that it had been painted 10 years ago before leaving California. I also knew it had some rust, and that is was very little for a 47 year old vehicle. However, I was surprised at the rust when I started looking around under the truck. There are a few holes that will need new metal welded in after surgery, and then some dents and scrapes to fix. All of these I am prepared to give a go, however, I will be buying and importing some steel patch panels. I am happy to hear from anyone who has experience in using the panels that are available in the market from the likes of LMC, Top Banana and others, which are best for quality and fit. Below are a few pics of my fenders and also the front, bottom corners of both doors. Passenger door underside. The fender on this side seems fairly intact, but I may just bite the bullet and replace that whole side while on the metal work and paint. ![]() Driver side fender corner...... this is bad, it is loose, and the inner support is rotten as well. I suspect you could pull the whole bottom off without much effort. ![]() Inside view...... made me want to cry. I will get the whole support for this side, rather than patching it up. The passenger side seems totally solid. ![]() ![]() Drivers side lower door front corner. I am happy to make up path panels for the two doors as they are out of sight. ![]() As mentioned above, please do add any comments and advice you may have for me regarding repairing the rust. The trucks sills and cab corners are completely solid, and there are small bits of rust on the inner fenders just behind the grille and front support. As can be seen in this pic. ![]() ==================================================================================================== ====== The other thing I looked at today was the placement of the rev counter my buddy Tim gave me in August. I did not want to fit it till the truck was painted, but realized that placing it and wiring it up will not stop me from the paint and prep. I plan on going for a satin black dash, or satin black and red combo. My question is this...... Where do most people place rev counters? Sensible, practical, visible etc..... Here is mine, just held in place or placed in position to get and idea. Opinions, advice ?? ![]() Somewhere in the left hand corner. ![]() Over to the right ?? ![]() Looking forward to ideas etc.... Thanks, Rian.
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
#8871 |
Registered User
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
|
Re: What did you do to your truck today?
Hey grizz1963....id get replacement doors if possible. If not definitely get new door skins and lower inside patches.
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer |
![]() |
![]() |
#8872 |
Registered User
Join Date: Jul 2013
Location: grand blanc.mi.
Posts: 175
|
Re: What did you do to your truck today?
put the tach on the column. I personally don't look at the speedo much...
|
![]() |
![]() |
#8873 | |
Registered User
Join Date: Feb 2009
Location: southeasternfoothillsofusa
Posts: 1,557
|
![]() Quote:
Sam |
|
![]() |
![]() |
#8874 |
Registered User
Join Date: Jan 2013
Location: Imperial, MO
Posts: 999
|
Re: What did you do to your truck today?
Grizz, you'll find a LOT of recommendations for Top Banana when it comes to patch panels here on these forums. I've installed a bunch of their panels on the '65 C10 I'm working on, and I'm happy with the panels I received.
As for the tach, personally, I'd get a smaller one with a more appropriate range. Wherever you put it, it would be less obstructive to your view, and with a smaller range, it will be easier to read. |
![]() |
![]() |
#8875 | |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,529
|
Re: What did you do to your truck today?
Quote:
![]() ![]() ![]() ![]() ![]() I have a small trenching tool (folding spade) that I would use to lift up the side that needed a spare fitted..... that's how I got the jack in last night. ![]()
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
|
![]() |
![]() |
Bookmarks |
|
|