Do you need '64-'66 Chevy Truck Parts?

[LILRED66]

Originally Posted by reighmey

I sent you a PM in reference to a right side front fender. Do you have one and how much to include shipping to 31815?

Thanks for the inquiry. I replied to your PM, so please let me know if I can help you with this item or other good, used '60-'66 Chevy/GMC truck parts in the future and thanks for the opportunity.

[283 Man]

Originally Posted by LILRED66

Hey Morton. Good to hear from you. I have a few good, used factory SM420 4-speed transmissions, as well as, a few good, used 3-speed manual transmissions available. They go for $125.00 each, picked up at my shop in Kansas City, KS. The starter bolts to the bell housing.

is the bell houseing included with the 4 speed trans?with the linkage to? thanks

[yoderconsult]

Looking for a 3 speed on the steering column. I have a 66 chevy stepvan with a column that needs replaced.

[jack SF]

hi. i need a/c compressor and brackets for a 292.
did 4-5-6 ever have a/c on 292 or do i have to look to a newer truck.

[LILRED66]

Originally Posted by 283 Man

is the bell houseing included with the 4 speed trans?with the linkage to? thanks

The 4-speed is complete with the bell housing and the shifter, but there is no linkage on a 4-speed.

[LILRED66]

Originally Posted by yoderconsult

Looking for a 3 speed on the steering column. I have a 66 chevy stepvan with a column that needs replaced.

Thanks for the inquiry. I have a few '60-'66 Chevy truck factory 3-speed on the column, steering columns, however, I am not sure if they are the same in the step vans of the same years. A good, used 3-speed steering column, is $125.00, including shipping, minus the steering wheel & horn assembly.

Please let me know if I can help you with this item or other good, used '60-'66 Chevy/GMC truck parts in the future and thanks for the opportunity.

[LILRED66]

Originally Posted by jack SF

hi. i need a/c compressor and brackets for a 292.
did 4-5-6 ever have a/c on 292 or do i have to look to a newer truck.

Good morning and thanks for the inquiry. Factory A/C was an option on the 4-5-6 Chevy trucks with a factory 292 six cylinder, however, they are more rare than "hen's teeth" and I do not have any. The compressor will be the same, regardless of the engine type or size, but the mounting brackets will be specific to the engine type or size.

Sorry I couldn't help you with these items, however, please keep me in mind in the future for your other '60-'66 Chevy/GMC truck parts needs and thanks for the opportunity.

[dropped65c20]

Hey there, i was wondering if by chance do you have a drivers side door panel and also drivers side window regulator?

Thanks,

Brad

[dropped65c20]

Oh and also, a working oil, fuel gauge for a 65.

[treegump]

I was looking at a 1964 C20 4x4 with closed knuckles, and front drum brakes. Do you have replacement parts for that front end? The main reason I didn't buy it was because I couldn't find an online place that sold parts for that front end. Thanks!

[283 Man]

Tony Ill be sending you out a money order for 4 speed granny low transmission for $125.00 just have to look and see in a few days when we could meet at your shop to pick it up. thanks Morton

[jbgroby]

Tony,

I got the fender in I really like the wrapping I can use then for protect other things ! Thanks

Will buy from again.

Jake

[LILRED66]

Originally Posted by dropped65c20

Hey there, i was wondering if by chance do you have a drivers side door panel and also drivers side window regulator?

Thanks,

Brad

Good morning Brad and thanks for the inquiry. By driver side door panel, do you mean the interior panel or an exterior patch panel. I have interior door panels, as well as, driver side internal window regulators. I will send you a PM with the particulars and thanks for the opportunity.

[LILRED66]

Originally Posted by treegump

I was looking at a 1964 C20 4x4 with closed knuckles, and front drum brakes. Do you have replacement parts for that front end? The main reason I didn't buy it was because I couldn't find an online place that sold parts for that front end. Thanks!

Welcome to the forums from Kansas City, KS. You will find a wealth of knowledge here. Good luck with your purchase of the '64 Chevy K20 4x4. The parts are available, however, I don't have any loose front differentials or parts for them. I know they are available.

Thanks for the inquiry and please let me know if I can help you with other good, used '60-'66 Chevy/GMC truck parts in the future and sorry I couldn't help you with the K20 front differential parts.

[LILRED66]

Originally Posted by 283 Man

Tony Ill be sending you out a money order for 4 speed granny low transmission for $125.00 just have to look and see in a few days when we could meet at your shop to pick it up. thanks Morton

Sounds great Morton. Please let me know your travel plans and I will make arrangements to meet you at the shop and help you load it.

[LILRED66]

Originally Posted by jbgroby

Tony,

I got the fender in I really like the wrapping I can use then for protect other things ! Thanks

Will buy from again.

Jake

Good deal Jake. I appreciate your business. Take care.

[LILRED66]

Originally Posted by dropped65c20

Oh and also, a working oil, fuel gauge for a 65.

PM sent. Thanks for the opportunity.

[reighmey]

Tony I got the fender today. Great wrapping of course UPS bent it a little but nothing I can't work with - Thank you.,

[reighmey]

How unusual is this:

http://atlanta.craigslist.org/atl/cto/1451598975.html

Someone has to love this - not sure what I would do with it.

[LILRED66]

Originally Posted by reighmey

How unusual is this:

http://atlanta.craigslist.org/atl/cto/1451598975.html

Someone has to love this - not sure what I would do with it.

Thanks for sharing. It is hard to say if the utility box is era correct, but it is not factory. There were many bed options available at the dealership level and in the aftermarket, in those years, but nothing from the factory. The original VIN tag will indicate if it was manufactured and sold as a chassis/cab and the bed was later added or if one of the owners swapped the regular bed for the utility bed.

Also, it is advertised as a 1963, but it is a 4-5-6 Chevy cab with '66 Chevy truck C10 body badges.

[LILRED66]

Originally Posted by reighmey

Tony I got the fender today. Great wrapping of course UPS bent it a little but nothing I can't work with - Thank you.,

Glad to hear you received the front fender, so quickly and sorry to hear the minor damage inflicted by the brown bully. Hopefully, you can work it out and end up with a good fender. Let me know if I need to do anything on this end and thanks for your business.

[reighmey]

Thanks Tony. Nothing for you to do it is a minor fix on a good fender.
Thanks so much.

[dropped65c20]

Hey Tony, i will take the DS inner door panel and window regulator. Also want to find out if you also have the DS door latch as well.

Thanks, Brad

[LILRED66]

Originally Posted by dropped65c20

Hey Tony, i will take the DS inner door panel and window regulator. Also want to find out if you also have the DS door latch as well.

Thanks, Brad

Thanks Brad. Payment received, via PayPal. I will pull, package and ship your items tomorrow or Monday. Thanks for your business.

[283 Man]

Tony, looking for the plug in part on 64-66 chevy ignition plug in but not the ignition itself the wiring for a little ways,thanks for help in advance.