Hazel the older Sister.... - Page 36 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67chevy1series · 06-07-2011, 04:44 PM

Quote:

Originally Posted by 67cheby

i really doubt it......your kinda my "TRUCK HERO"......SUPER BILLET

i feel the same way hes a good motivator fro me and my 67 even though mine wont be as cool or clean and simple....

Quote:

Originally Posted by n2billet

Going to DC to work again........I didn't say this Christmas

dayum im starting to hate your job it keeps interfering! lol "this months issue of classic trucks magazine featuring keiths 67 "hazel" in december 2017"

n2billet · 06-21-2011, 11:07 PM

Had a few hours to kill this morning so I rolled the truck out into the sunlight for the first time in almost 2 years......it was nice to see it outside, dirty but outside!

VA72C10 · 06-21-2011, 11:10 PM

So....motivated now?

67chevy1series · 06-21-2011, 11:10 PM

gorgeous.....

dwalt14 · 06-22-2011, 07:10 AM

I havent read through your whole thread but what gas tank are you running?

n2billet · 06-22-2011, 07:49 AM

Quote:

Originally Posted by VA72C10

So....motivated now?

Oh yeah....

Quote:

Originally Posted by 67chevy1series

gorgeous.....

Thanks

Quote:

Originally Posted by dwalt14

I havent read through your whole thread but what gas tank are you running?

FuelCellGuy (forum member) made it for me, you should be able to find him in the vendor section.

SCOTI · 06-22-2011, 10:06 AM

Have I mentioned YS lately?

Dinos63 · 06-22-2011, 11:20 AM

Quote:

Originally Posted by 67chevy1series

gorgeous.....

ditto!!

67chevy1series · 06-22-2011, 02:38 PM

Quote:

Originally Posted by n2billet

Oh yeah....

Thanks

finally you get motivation... your welcome keith

Quote:

Originally Posted by Dinos63

ditto!!

AMEN

n2billet · 06-22-2011, 04:55 PM

Quote:

Originally Posted by SCOTI

Have I mentioned YS lately?

Then I want tell you what I got done today and what I have planned tomorrow!

**STP67-72** · 06-22-2011, 04:57 PM

Tell me then. Looks Killer

67chevy1series · 06-22-2011, 05:13 PM

you could tell me to

jb1016 · 06-22-2011, 05:15 PM

Y definitely S, but at least you share the pictures...

Looking killer as always.

aggie91 · 06-22-2011, 05:47 PM

Looks good. Is it going to be ready for GG's in October at TMS?

n2billet · 06-22-2011, 05:59 PM

Quote:

Originally Posted by aggie91

Looks good. Is it going to be ready for GG's in October at TMS?

Nope, I'm going to make a few little changes to the 71 stepside and take it. The 67 may look done but it's a long way from finished.
Posted via Mobile Device

thor · 06-22-2011, 06:09 PM

love this build! (and hope you don't mind, but your quote had me laughing so hard I added it to my sig, with props of course.)

VA72C10 · 06-22-2011, 07:34 PM

Quote:

Originally Posted by n2billet

Then I want tell you what I got done today and what I have planned tomorrow!

You don't have to tell Scoti....but the rest of us want to know

n2billet · 06-23-2011, 05:30 PM

Dropped the exhaust off to be coated today......will be a month before I see it again......high temp coating inside and out!

**67cheby** · 06-23-2011, 05:32 PM

WOW...nice exhaust work

n2billet · 06-23-2011, 05:36 PM

Quote:

Originally Posted by 67cheby

WOW...nice exhaust work

Thanks, for some reason I like building them, it's like a metal puzzle.

**67cheby** · 06-23-2011, 05:43 PM

yes..a beautiful and very smooth seamed metal puzzle !! great work on all of the joints

rustSpot · 06-23-2011, 07:11 PM

Lookin killer Keith! Good feelin to roll it out Im sure!

gringoloco · 06-23-2011, 07:32 PM

Quote:

Originally Posted by n2billet

Thanks, for some reason I like building them, it's like a metal puzzle.

Equal parts fun/challenge/frustration. Nice work

**67cheby** · 06-24-2011, 09:49 AM

hey just wanted to ask a quick question, i am looking at the COMPU-TRONIX distributor-less ignition systems, for clearance/performance reasons (being able to pull the distributor without dropping the motor) just wanting to know if you knew anything about them ??

Portmod7 · 06-24-2011, 10:57 AM

Quote:

Originally Posted by n2billet

Dropped the exhaust off to be coated today......will be a month before I see it again......high temp coating inside and out!

Kinda seems like a stupid question, because by looking at the marks from the grinder it seems obvious, but....

Did you just order up a pile of straight pipe, 90's, and 45's and piece them together, or did you get some custom bends made and do it that way?

Looks great, thanks for taking the time to post a build thread. I've never seen a truck I like as much as any one of the many you've done!

06-21-2011, 11:07 PM	#877
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: Hazel the older Sister.... Had a few hours to kill this morning so I rolled the truck out into the sunlight for the first time in almost 2 years......it was nice to see it outside, dirty but outside! Attached Images __________________ http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold

06-21-2011, 11:10 PM	#878
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Hazel the older Sister.... So....motivated now? __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-21-2011, 11:10 PM	#879
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Hazel the older Sister.... gorgeous.....

06-22-2011, 07:10 AM	#880
dwalt14 Registered User Join Date: Mar 2011 Location: Pearland, TX Posts: 70	Re: Hazel the older Sister.... I havent read through your whole thread but what gas tank are you running?

06-22-2011, 10:06 AM	#882
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,938	Re: Hazel the older Sister.... Have I mentioned YS lately? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

06-22-2011, 04:57 PM	#886
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,664	Re: Hazel the older Sister.... Tell me then. Looks Killer __________________ 55 Chevy original swb (big back window) 61 Chevy bubble top (427-5 speed) 67 Chevy stepside (Krusty) 68 Chevy swb fleet (Lola) 68 Chevy swb fleet 71 Chevy swb fleet ( future PB project) 97 crew cab power stroke 07 SS Trail blazer

06-22-2011, 05:13 PM	#887
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Hazel the older Sister.... you could tell me to

06-22-2011, 05:47 PM	#889
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: Hazel the older Sister.... Looks good. Is it going to be ready for GG's in October at TMS? __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

06-22-2011, 06:09 PM	#891
thor Registered User Join Date: Apr 2008 Location: Redmond, WA Posts: 679	Re: Hazel the older Sister.... love this build! (and hope you don't mind, but your quote had me laughing so hard I added it to my sig, with props of course.) __________________ 1972 Chevy Blazer CST.....Project: Polished Turd

06-23-2011, 05:30 PM	#893
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: Hazel the older Sister.... Dropped the exhaust off to be coated today......will be a month before I see it again......high temp coating inside and out! Attached Images __________________ http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold

06-23-2011, 05:32 PM	#894
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Hazel the older Sister.... WOW...nice exhaust work __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

06-23-2011, 05:43 PM	#896
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Hazel the older Sister.... yes..a beautiful and very smooth seamed metal puzzle !! great work on all of the joints __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

06-23-2011, 07:11 PM	#897
rustSpot NO REGRETS Join Date: Oct 2006 Location: Rockwall, Texas Posts: 498	Re: Hazel the older Sister.... Lookin killer Keith! Good feelin to roll it out Im sure!

06-24-2011, 09:49 AM	#899
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Hazel the older Sister.... hey just wanted to ask a quick question, i am looking at the COMPU-TRONIX distributor-less ignition systems, for clearance/performance reasons (being able to pull the distributor without dropping the motor) just wanting to know if you knew anything about them ?? __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.