slik ricks 67 short wide CST

[oldblue1968chevy]

I think ive seen repop 67 armrests (arent they the same as 60-66?)

[67chevy1series]

john you are half correct....64-67, but i have only seen them in gray and black.... well i paid them man for the arm rests and the clutch hole plug, i need to start figuring out which holes i need and which i dont so i can buy plugs and fill them, so it is really nice and sound deadened in the cab, for when i listen to radio or somthin.... i want it loud on the out side but, a little quieter on the inside so i can actually hear what some one is saying to me

[oldblue1968chevy]

i have to scream @ passengers to to tlak on the phone

[67chevy1series]

Originally Posted by 1969~C-20~Heavy-Half

that pic of your ground welds is garbage buddy. FLASH!!

haha cant tell if your serious or jokin but, yes your right!

Originally Posted by oldblue1968chevy

i have to scream @ passengers to to tlak on the phone

haha i know thats the way it is with my dads 70!

[67chevy1series]

well today i bought a parchment cener seat belt so it would be easier to dye red , i have a deal with my dad that i get his red seat belts and he gets another set that he can dye grey, so, saftey!also tommorow i am gonna drill the holes for the pass. mirror to mount (my dads 70 has the holes on passenger door but not driver...wierd)so i will measure those holes and drill them so more saftey... i also installed the only peice i had of the shift linkage

[67chevylongbed]

Originally Posted by 67chevy1series

well today i bought a parchment cener seat belt so it would be easier to dye red , i have a deal with my dad that i get his red seat belts and he gets another set that he can dye grey, so, saftey!also tommorow i am gonna drill the holes for the pass. mirror to mount (my dads 70 has the holes on passenger door but not driver...wierd)so i will measure those holes and drill them so more saftey... i also installed the only peice i had of the shift linkage

Sounds good! Lol, my brother's truck has no carpeting or sound deadener, with straight pipes that dump out under the cab...I'm pretty sure my hearing is a lot worse now from riding in it

[67chevy1series]

haha eric ya my dads 70 is loud but not that bad lol.

well my 28 shipped for the buddy bucket cab brace went south so now i am talking to classic bowties for one waitin on a pm

[1969~C-20~Heavy-Half]

Lol I was just jokin buddy. Pics sometimes just never turn out the way you want them if ya know what I mean.

[67chevy1series]

oh yea some pics just never comlply....sucks it looks bad in the pic hehe.thanks for takin a look at my build hope you enjoyed it

[67chevy1series]

okay started drilling the holes for the mirror on the passenger door i think i am going to save up and order":
the red rear lenses, the 2 white or ''clear'' lenses, the gaskets for the mirrors the parking light lenses and the chrome ring that goes on the outside of the dash and keeps the ignition in the dash

[heeroyue2002]

did they back out on you. when u comen to clean my yard.

[67chevy1series]

no he mis counted and didnt have one for me....i pmed mel and i told him what happened and i think he met i was trying to get his for 28 shipped haha. i dont know when you gonna come pick me up in that 68?

[oldblue1968chevy]

I have a diagram on sport mirror mounting..

My truck didnt have holes either, Or so I thought, If you looked CLOSELY you could see the bondo circles, I knocked em thru with a screwdriver and wala

[67chevy1series]

oooooohhhh post that diagram i need it for the hole on the left that hole is covered by my dads new mirrors...

[heeroyue2002]

Lol ask for a better cell or invest in a cam with flash
Posted via Mobile Device

[67chevy1series]

my dinosuar,1972 radio shack phone is breaking and is messing up calls... so a the phone will be taken care of buyt i am going to buy the i pod touch for my radio and just as an ipod

[oldblue1968chevy]

need the right side too? There diff.

[67chevy1series]

the only one i need is the pass. the driver already had the holes but the pass. didnt

[oldblue1968chevy]

so you need the other pic, leme see if i got it, hang on

has the truck ever been repainted and possibly bondo'd the holes up (mine was)

I have a special folder for pictures titled 'whats what' I put all the schematics etc etc in there, it comes in handy lol

[67chevy1series]

wow the pass. mirror arm is 1 inch longer to help with view that is cool! but they are both put in the same area.... cool thanks john!

[67chevy1series]

well the doors and mirrors are a funny story.... this truck only had the one mirror on the driver side i guess the owner didnt like it and went to another mirror then another then another. there are about 8 or 9 holes on each door seems the owner measured the passenger side and drilled smaller holes on the ass. so he could put the same style mirror on the pass. side after that i lost count..... nice doors bad owner: speaker holes, excessive amount of holes for various mirrors and the driver door arm rest cage nusts came out so he messed up the holes....should i weld in bolts or JB weld in bolts to the door for the arm rests?

haha good i dont have to save them there in my build haha

[heeroyue2002]

Cool pixs. Ima save those.
Posted via Mobile Device

[oldblue1968chevy]

No arm rests looks clean I sorta wish I didnt get any (my truck never had em).

You'll have to get the jb weld'd nut to stick to the backside of the door..

Are there suppost to be 'speednuts' or J nuts?

I have a bunch more 'whats what' so if ya need anything hollar at me

[67chevy1series]

well i need diagrams of what holes are what for the fire wall i know the basics: clutch hole, steering colum hole, heater holes but there are others on the drivers side i am unsure

[dougminton]

subscribed