How about some pics of bagged 47-59

[big_moss]

whats everyone running for lowers arms on their bagged a.d.s I've got speedway uppers and I'm going tho be notching the rear with a parallel 4 link just want the frame to lay and the running boards to lay flat with frame going to try and mount the cab as low as possible

[99 to Life]

for the s10 frame, the stock lowers are fine. I didn't even have to dehump mine. and I was maybe 3" or under off frame, RB hit ground. You can find some threads online s10forums and such, on how to dehump the arms if you need. Personally, lower arms are pricey and the stock lowers do the same thing. I rebushed mine, which was $75 I do believe, so new balljoints and bushings you got yourself in around 150$ give or take. Even if your lower arms where no good, I would find a used set or buy some OEM s10 arms. again its just one area where its not necessary spending hundreds of dollars on, esp early on in a build. Just my take

[lower50's]

Originally Posted by big_moss

whats everyone running for lowers arms on their bagged a.d.s I've got speedway uppers and I'm going tho be notching the rear with a parallel 4 link just want the frame to lay and the running boards to lay flat with frame going to try and mount the cab as low as possible

I used tubular upper and lower nice stuff link below. My frame sits about 3" off the ground. Cab is about 1/2" off the frame.
http://www.airassisted.ca/Bolt-in-Ai...r-Control-Arms

[ironadict]

Hey skunkswife, I know this post was years ago but I was wondering how tall of tire wheel combo you were able to fit under your step side bed. I'm starting a 57 project and trying to get all the math straight. Thanks!

[ironadict]

Originally Posted by skunkswife

here are a few recents of mine

What size tire wheel combo did you fit under the back? Beautiful truck!

[ironadict]

Originally Posted by tpimuncie

Hey is that the scottshotrods super slam? I just got quoted for one and am planning on going that route. How do you like it? Does it allow you to lay rocker? Thanks!

[513CHOPSHOP]

My 56 on Air

[ironadict]

Originally Posted by 513CHOPSHOP

My 56 on Air

513chopshop that's a rad truck. Was just looking over your build thread. I'm starting a 57. Did you need to chop out any cab with single piece drive line? Also whats that tire wheel combo? Looks perfect

Thanks for posting

[513CHOPSHOP]

Originally Posted by ironadict

513chopshop that's a rad truck. Was just looking over your build thread. I'm starting a 57. Did you need to chop out any cab with single piece drive line? Also whats that tire wheel combo? Looks perfect

Thanks for posting

Ironaddict , Thanks!! I had to notch the factory cross members but not the cab itself. The wheels are mobsteel 20x9s with the custom offsets.

[Perämettä]

My -56

[skymangs]

my 49

[Cjcolbyjack]

Beautiful trucks! Every single one!

[skymangs]

Here's here's a couple more pics of my 49

[skymangs]

Last one.

[tpimuncie]

Originally Posted by ironadict

Hey is that the scottshotrods super slam? I just got quoted for one and am planning on going that route. How do you like it? Does it allow you to lay rocker? Thanks!

Yeah its the scotts ifs but switched it out and went hydraulics

Rockers dont hit but im happy with it
Posted via Mobile Device

[Advanced Design]

Originally Posted by skymangs

Here's here's a couple more pics of my 49

Chris, I love that truck of yours! It didn't get hurt in the fire did it? Man I hope not....

[skymangs]

Nope, that one was under the covered parking luckily.

[lower50's]

Cjcolbyjack Your truck tucks the wheels very well.

skymangs Very nice looking truck!! What do you have to lift your bed?

[murd969]

Here's my 56'. Full accu-air with e-level and ridetech shockwave bags all around.

[skymangs]

I used pillow blocks from Grainger with a 1 inch ID. Then I just bolted in a 1 inch piece of round tube. Then I built a simple framing for my bed and welded it to the round tube. It is all detailed in my build thread in my signature.

[Bone$]

My 54....

[skymangs]

It is perfect just the way it is put a back window in it and drive the wheels off it.

[laid67c10]

Some progress on my 49.

[big_moss]

Laid67 do you not have a build thread truck looks awesome man

[BigFrz]

Originally Posted by laid67c10

Still in the works, mine is the one closet in the pic, the other two belong to a couple of my buddies! All will be bagged and LS powered! All s10 clips and full 3/4 custom frames!

In the pic it looks like you shortened your rear end is it.