Columbus..the 1957 IH 4x4..

[mongocanfly]

that's a cool 56 Richard...did it have a bed on it?

[richard2717]

It did not have a bed and I did not see one floating around the room either.

It was in the International room.



This is where we were. I think they have a FB page.

.

[Ol Blue K20]

I sure miss receiving notifications. I just checked in, and that chrome and your letter painting looks fantastic!

[mongocanfly]

That's cool Richard...thanks for sharing

Thanks Dale..!!

[mongocanfly]

Got started on the temp paint booth...
I Got 2 of these fans that pull 1525cfm each...I'm hoping thatll be enough to get the fumes outta the temp paint booth..
made 2 of these filter boxes 24x30...still have to fab a flange for the back side to hook the fan ducts to...
the temp paint booth will be made from clear plastic..I ran a couple 1/8" cables front to back of my shop
12ft apart to hang the plastic from...so the final booth will be 10ft tall, 12ft wide and 25 ft long..
Maybe this'll work..

[67C10Step]

Mango,
I’m an engineer so forgive me. Your room dimensions indicate about 3000 cubic feet. Those fans would give you a full exchange every minute if your filters can pass enough air. That should be pretty good but I’m sure you are still planning on wearing a respirator.

Photos of your setup as I have been thinking ahead and down this path as well.

[mongocanfly]

oh yeah...respirator and Tyvek suite...I made 2 of those filter boxes and ive got plenty of those filters so I should be good there if I need to change them between coats..

[mongocanfly]

Well this SUCKS..!!!............ but in a good way..!!

Stopped by Lowe's and picked up a couple of duct flanges..of course they have nothing to match the 11-1/4" duct that came with my exhaust fans...so I bought the 12in ones, drilled out the rivets and squooze it down to 11in...they fit good now...mounted them on the boxes and gave it a wirl...pulls fairly good...I just hope its gonna be enough...itll suck a sheet of paper up to the filters...HVAC guy at work says I may need a more free flowing filter cause what I have may be to restrictive...I'll see how it goes with what I have first though...

[mongocanfly]

got a couple of interesting items from the Wisconsin historical society
IH used a LST (aka Line Set Ticket) when they built their trucks...
on a whim I contacted them to see if they had the records...well they did..
a small donation and they emailed me scans of the originals
A LST in the IH world is a pretty neat thing to have..
here is the one for Columbus...

[mongocanfly]

And I also got one for the 58 truck which is also part of this build
this one didn't scan good ..they gonna retry it and see if the faded side will clear up

[richard2717]

That is pretty cool that they still have the records. SUre wish I could get htem for some of my GM

[jjzepplin]

WOW! That is incredible! Who would have thought about that? YOU!

[mongocanfly]

Yes Richard it is very cool piece of history to have...its the equivalent of a spid for the Chevy trucks..

Zepp..I couldnt believe they had records going back that far...definitely glad to have these..

[67ChevyRedneck]

Those are so cool!

That's one of the things so awesome about old Pontiacs, the PHS (Pontiac Historical Society) has copies of everything for every car. I got a copy of the build sheet and the dealer sticker. I also have the original title, the original bill of sale (a 64 Chevy 4 door was traded in) and the original build sheet from the original owner. What sucks is my car was just a plain Jane OHC six car. It's all cool to look at, but pretty much worthless

[mongocanfly]

I hear ya Jesse..its like alot of things...seems like the older we get the more we cling to the past..kids nowadays dont care...we now live in a disposable society..
But it's cool you got all that info on your poncho..

[mongocanfly]

Not much progress as of late...just little things...got the gas tank liner done and painted the tank, and started wiring the engine...it took much longer than it should have, but it was because of me moving things around on the engine...relocating the coils, throttle and maf ment I had to pull those wires out of the harness and reroute them..then I accidentally pulled the injector plugs wires out of one of the plugs...dang it..then when I went to plug in the map sensor I realized the map sensor plug lock was broken off..so I'll have to pick up a new one...
Next will be trying to find a location for the ecm and wire the truck side of the harness...
Still also trying to get the temp paint booth ready..looks like I'm gonna get a break from work for a couple of weeks and I'd sure like to get some paint on it...

[regan wilson]

Quit breaking stuff and get something done while you have the time. We're waiting.

[mongocanfly]

Haha...I'm tired of waiting to Regan ....I'm the master at breaking stuff so this may take awhile

[mongocanfly]

Another little bit done .. I had bought that column saver thinking it would fit the firewall, but it wasn't gonna work like I thought..I was gonna have to close up the old hole in the firewall anyway, so I made a mount thatll work with the colum saver and close up the hole at the same time..

[8man]

Nice mount. That looks good.

[mongocanfly]

Thanks Robert..for the most part itll be unseen where it goes..only a small portion will be visible..

[mongocanfly]

Been outside working ..walk back in the house , only to see on the TV, Gomer pumping gas thru the gun port of the 1960 IH treasury gold truck..ahh the good old days of tv...
Well anyway while we are in the process of social distancing, and hoarding toilet paper, I decided to take advantage of a 70+degree day and spray some raptor liner on the front fenders and inner fenders

[mongocanfly]

Had just enough to spray the bottom of the running boards as well...2 cans was barely enough for all this...I've 2 cans left to do the rear fenders and the bedside behind the fenders...

[67C10Step]

mongo,
Tell me more about your application of raptor liner. You mention having cans left. You buying it in aerosol? I like what I have seen with it from a number of people applying it and would like to use it much like you have done. Possibly even on my steps and inside the bed depending upon how well the bed sides clean up. Figure that would look good on the inside of the bed and cover some ugly.

[mongocanfly]

67c10
Raptor liner comes in a kit form... you get a shutz gun, hardner, and raptor...I opted for the 4 bottle kit..but you can get other size kits if needed..
To use you top off the bottle with the hardner,shake well, screw the gun on and spray...clean up with acetone....surface prep is to sand with 80-180g paper...I used 80..
It leaves kinda of a hard finish,,I think itll work fine in my wheel wells...
I have linerextreme that I'm gonna use in my bed..
Both of these can be had in colors as well...the linerextreme is color matched to my paint..