|
03-04-2010, 09:22 PM | #1 |
SSN 706
Join Date: Mar 2009
Location: Pocatello Idaho
Posts: 3,821
|
Re: Daverods project 66
Put my rubber door seals on and got my mat in. Don't know what I'm going to do about the peal and seal? Thing runs super. Sounds great, not to loud untill you get on. So much for the paint on the headers. I have my timing set at 4?
|
03-04-2010, 11:58 PM | #2 |
Daring to be Different
Join Date: Aug 2008
Location: Hesperia, Ca
Posts: 4,499
|
Re: Daverods project 66
Looks good Dave
__________________
Dennis Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 KUSTOM RIDES FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] I AM WE TODD IT, I AM SOFA KING WE TODD IT |
03-05-2010, 02:20 PM | #3 |
Member of the longbed union.
Join Date: Feb 2009
Location: Killeen, Tx
Posts: 2,158
|
Re: Daverods project 66
that's how I was going to run mine. You wont be able to lay it on the frame in the front because of the crossmember, But that's the way to go, or make your own brackets.
__________________
Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759 Last edited by ruffrida2005; 03-05-2010 at 02:21 PM. |
03-05-2010, 04:26 PM | #4 |
SSN 706
Join Date: Mar 2009
Location: Pocatello Idaho
Posts: 3,821
|
Re: Daverods project 66
So when I let all the air out the crossmember would sit on the ground? Do you think I would have to change the steering set up? I guess this is as low as you go with aired out cross member on the ground.
__________________
Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 03-05-2010 at 11:01 PM. |
03-06-2010, 01:18 AM | #5 |
Member of the longbed union.
Join Date: Feb 2009
Location: Killeen, Tx
Posts: 2,158
|
Re: Daverods project 66
you wont have to mess with the steering. This is mine without drop spindles and a small notch in the rear. Gives you an Idea.
__________________
Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759 |
03-06-2010, 10:05 AM | #6 |
SSN 706
Join Date: Mar 2009
Location: Pocatello Idaho
Posts: 3,821
|
Re: Daverods project 66
Sweet, I was worried about the steering. My truck has a lot of body roll.I thinking I need to put a sway bar on the front, maybe new shocks? I have a sway bar off a 71 sub. I going to see if it will work. Maybe something to do today. Is that the truck with the rusted roof? It looks good from here. I don't think I would ever buy a truck that's been painted. You just never know.
|
03-06-2010, 11:50 AM | #7 |
Daring to be Different
Join Date: Aug 2008
Location: Hesperia, Ca
Posts: 4,499
|
Re: Daverods project 66
Dave it will go as low in the front as the frame is where it touches to bump stops. Measure from the ground to the lowest part of the frame where the bump stops were. Then with the springs installed subtract the space between where the bump stop was and what would hit it. I hope that didn't sound too confusing. I wish I can draw you a picture.
I wouldn't install a sway bar at all. If you install the front and rear air bag controls independently and not connected to each other, like front and rear controls on 2 switches. If you have each bag adjustable you don't need a sway bar. Example is when the truck leans to the right the air in that bag will gain more pressure. If the air line is connected to the left bag along with the right bag, and controlled with 1 switch, when the pressure gains in the right bag it will transfer the pressure to the left bag. Causing it to lean. When the pressure stays in each bag it will keep it from leaning to that side. Are you really confused now.
__________________
Dennis Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 KUSTOM RIDES FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] I AM WE TODD IT, I AM SOFA KING WE TODD IT |
03-06-2010, 12:11 PM | #8 | |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,004
|
Re: Daverods project 66
Quote:
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
03-06-2010, 01:20 PM | #9 |
SSN 706
Join Date: Mar 2009
Location: Pocatello Idaho
Posts: 3,821
|
Re: Daverods project 66
Thanks for the info guys. I'm going to put the sway bar on. On my 64 (Work/Driver) I'm thinking about bags with no compressor for now. I want the front lower and I thought that would be a good way/ cheap way to do it. I'm going to cut some more off my spring today just to see what it does. I want more of the stink bug look. Right now it's just about level. On my 66 I will do the level control thing for sure.
|
03-06-2010, 01:44 PM | #10 | |
Daring to be Different
Join Date: Aug 2008
Location: Hesperia, Ca
Posts: 4,499
|
Re: Daverods project 66
Quote:
I got it this low without notching the frame or dropped spindles.
__________________
Dennis Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 KUSTOM RIDES FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] I AM WE TODD IT, I AM SOFA KING WE TODD IT |
|
03-06-2010, 11:16 PM | #11 |
HOW long until spring??
Join Date: Mar 2009
Location: Star Idaho
Posts: 1,413
|
Re: Daverods project 66
When we finish what we started here, then we will talk buying about a new project. Congratulations on driving your truck. Just starting mine is a rush, Driving it will come soon.
__________________
69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project" |
03-06-2010, 11:23 PM | #12 |
SSN 706
Join Date: Mar 2009
Location: Pocatello Idaho
Posts: 3,821
|
Re: Daverods project 66
I'm loving mine. It's a buzz saw. Figured out my springs were'nt in right. Had to turn them alittle. After I did that no more noise and it sits even lower. I wish I lived in Boise. Congrats on your truck. I just want to buy the truck for a furture project. Thats ok is'nt it. It won't really be a project.
__________________
Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 03-06-2010 at 11:25 PM. |
03-06-2010, 11:32 PM | #13 |
Member of the longbed union.
Join Date: Feb 2009
Location: Killeen, Tx
Posts: 2,158
|
Re: Daverods project 66
That's the truck witht he jacked up roof. I really need to take a wire brush to the seam sealer and see what's really going on. Wont be for a little while. I haven't been able to work on the truck. I'm building my son's a moster swing set.
Now get back to work.
__________________
Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759 |
03-06-2010, 11:46 PM | #14 |
SSN 706
Join Date: Mar 2009
Location: Pocatello Idaho
Posts: 3,821
|
Re: Daverods project 66
I hate stuff like that. Stuff with instructions and parts with numbers and stuff. I always make my wife put that stuff together, or at least read it and tell me what to do. Good luck with it. What size of air tank do I need?
|
03-06-2010, 11:54 PM | #15 |
Member of the longbed union.
Join Date: Feb 2009
Location: Killeen, Tx
Posts: 2,158
|
Re: Daverods project 66
Oh it's nothing that is bought. were builing it ourselves.
The air tank size depends on if you wanna play or if you just wanna go up and down when you get in and out. My truck just had a 3 gal tank at first in that pic. Only front and back. I'm going to run a 8 Gal now, 8 valves and I wanna play a little at first. A 5 gal is a good all around tank. Remember you need to check the rateing on the compressor to see what size tank they will fill. Most Viars are rated for a 5 Gal. That's why I'm running 2.
__________________
Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759 |
03-07-2010, 12:03 AM | #16 |
SSN 706
Join Date: Mar 2009
Location: Pocatello Idaho
Posts: 3,821
|
Re: Daverods project 66
Sweet ,now I know. I can live with building stuff as long as there's no instructions. I love it even better when the instructions are in like 12 different languages. A picture is ok as long as it's in English..
|
03-08-2010, 09:09 PM | #17 |
SSN 706
Join Date: Mar 2009
Location: Pocatello Idaho
Posts: 3,821
|
Re: Daverods project 66
Parts fairy dropped off some new u bolts. They were larger then the old ones. Had to drill new holes, what a pain did'nt wait to spend 20 on a new bit. Gott my arms and tires mounted. Can't figure out why it won't go all the way to the ground. In think my upper arms are hitting the frame and stopping it from moving down? If I stand on the front it will go all the way.??
|
03-08-2010, 10:04 PM | #18 |
Member of the longbed union.
Join Date: Feb 2009
Location: Killeen, Tx
Posts: 2,158
|
Re: Daverods project 66
You have to notch out at the top of the spring cup so the upper arm will go lower.
__________________
Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759 Last edited by ruffrida2005; 03-08-2010 at 10:06 PM. |
03-08-2010, 10:10 PM | #19 |
SSN 706
Join Date: Mar 2009
Location: Pocatello Idaho
Posts: 3,821
|
Re: Daverods project 66
I don't get it? I'll have go look. I was just looking at my tires compaired to my 64 they are huge.
__________________
Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 03-08-2010 at 10:13 PM. |
03-08-2010, 10:25 PM | #20 |
SSN 706
Join Date: Mar 2009
Location: Pocatello Idaho
Posts: 3,821
|
Re: Daverods project 66
Looks like they notched it to get access to the bags. Good idea I'll do it. Still don't see why my frame is'nt on the ground. I guess with my engine in there it will be. Just has me worried. My arms look really close to the frame. they touch it. I was thinking they were bindiing. Nice link good info thanks Paul
__________________
Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 03-08-2010 at 10:35 PM. |
03-08-2010, 10:07 PM | #21 |
Member of the longbed union.
Join Date: Feb 2009
Location: Killeen, Tx
Posts: 2,158
|
Re: Daverods project 66
__________________
Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759 |
03-08-2010, 10:26 PM | #22 |
Member of the longbed union.
Join Date: Feb 2009
Location: Killeen, Tx
Posts: 2,158
|
Re: Daverods project 66
did you see it before I posted the pic and the link. Just cut a whole it in. everyones doing it. It's all the rage.
__________________
Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759 |
03-08-2010, 10:28 PM | #23 |
Member of the longbed union.
Join Date: Feb 2009
Location: Killeen, Tx
Posts: 2,158
|
Re: Daverods project 66
You dont need to access the bag from there. Go take a look at it and I bet your arms are hitting right here. Look and a bunch of other pics of bagged trucks and you'll see the same.
__________________
Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759 |
03-08-2010, 10:51 PM | #24 |
SSN 706
Join Date: Mar 2009
Location: Pocatello Idaho
Posts: 3,821
|
Re: Daverods project 66
I don't know? the upper arms are'nt even close to the part that is notched in the pictures. They move in the other direction. Are you popping pain meds like smarties again.
#17 From the linky. "They are cut out for access to the top of the bag. It looks as though he welded in the upper bag plate instead of bolting it on. When you do that the only way to access the top of the bag is to cut an access hole. IMO even if you bolt that plate on, it is a good idea to cut an access hole to make it easier to swap the bag out."
__________________
Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 03-09-2010 at 12:20 AM. |
03-08-2010, 11:45 PM | #25 |
Resistance is Futile
Join Date: Dec 2006
Location: Mesa,Arizona
Posts: 3,520
|
Re: Daverods project 66
Could be balljoint bind or the cross shafts binding up a little. On my burb they were tight but the BBC should push 'em down no problem.
Lookin' really cool daverod ........
__________________
64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device |
Bookmarks |
|
|