68 S/C update..... - Page 37 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jorgensensc · 05-02-2013, 03:07 PM

I can snap a few later today and get them to you. There is plenty of room though. Do you know off the top of your head what the hose on top of the tranny goes to? I thought it was just a vent, but it has a "T" fitting on it, like it had a hose going somewhere.
Posted via Mobile Device

**Hart_Rod** · 05-02-2013, 03:51 PM

I'm pretty sure it's just a vent.

jorgensensc · 05-02-2013, 06:31 PM

Pictures as requested. Sorry for the poor quality, camera phone and its hard to get in there really close. You can see the vent thing I'm talking about. I would say there is about 2" of space, maybe even a little more. However I still have to make sure I'm leveled out at the right driveline angle. I used the spacers that were on the th400 mount, but the engine still seams to dip down, and the tranny pan doesn't appear to be level. I need to get out my angle measurer and check the angle.

**Hart_Rod** · 05-03-2013, 08:32 AM

Quote:

Originally Posted by jorgensensc

Pictures as requested. Sorry for the poor quality, camera phone and its hard to get in there really close. You can see the vent thing I'm talking about. I would say there is about 2" of space, maybe even a little more. However I still have to make sure I'm leveled out at the right driveline angle. I used the spacers that were on the th400 mount, but the engine still seams to dip down, and the tranny pan doesn't appear to be level. I need to get out my angle measurer and check the angle.

Thanks for the pics! No hurry, but when you get a chance can you snap a few from the side? I like to see where your motor mounts are in relation to the head. I'm just curious as to how far I will be able to slide my motor back. Also, here's a couple really cool animations of building an LS motor, enjoy!

GM Corvette Engine Assembly LS2 - YouTube

GM ZR1 Corvette V8 Engine Assembly LS9 and Car -...

Dova · 05-06-2013, 04:51 PM

Very nice build, sat down and read through it all today. What kind of fuel mileage do you think you'll be getting with the 6.2 combo?

jrdv · 05-06-2013, 10:52 PM

Dammit,

You are gonna screw up my plans for a Florida visit.

Quit getting so much done.

John

**Hart_Rod** · 05-07-2013, 09:12 AM

Quote:

Originally Posted by Dova

Very nice build, sat down and read through it all today. What kind of fuel mileage do you think you'll be getting with the 6.2 combo?

Thanks Dova! If I my MPG is somewhere between 15-18 I will be very happy...

Quote:

Originally Posted by jrdv

Dammit,

You are gonna screw up my plans for a Florida visit.

Quit getting so much done.

John

, believe me John I have a lot left to do......

. How's your swap coming?

raull · 05-07-2013, 09:48 PM

thats some cool vids !!!!

C10_ustacould · 05-07-2013, 10:03 PM

Quote:

Originally Posted by Hart_Rod

Thanks Dova! If I my MPG is somewhere between 15-18 I will be very happy...

...and 600HP!!

Moccelin · 05-08-2013, 05:39 AM

And here is the why I want to put an L99+6L80 in my Chevrolet Veraneio. First because the L99 is the only V-8 engine avaiable around here, and since playboys are starting to destroy Camaros SS maybe I could find one. But the main reason is that even stock I will get 3 times the power, and something something lower than 2 times the torque that I have with my L6 261 (first gen stovebolt). And everyting with higher kilometrages (milleages) per liter (galon). But in my case I want the AFM, VVT, etc...

jrdv · 05-08-2013, 11:02 PM

Quote:

Originally Posted by Hart_Rod

Thanks Dova! If I my MPG is somewhere between 15-18 I will be very happy...

, believe me John I have a lot left to do......

. How's your swap coming?

Mine has not been touched in a while. We are in a drought and I spend all my time feeding cattle. Most will be sold by the end of the month.
I will have more shop time this summer, although I may have to find a side job for a while. Still up for a Florida trip tho!

John

EZ SPEED · 05-09-2013, 06:49 AM

Quote:

Originally Posted by Hart_Rod

Thanks Dova! If I my MPG is somewhere between 15-18 I will be very happy...

Thas prob pretty close...my SS gets right at 15 mpg with 735 rwhp ... if I drive it somewhat decent...LOL

**Hart_Rod** · 05-09-2013, 09:21 AM

Quote:

Originally Posted by raull

thats some cool vids !!!!

Thanks!

Quote:

Originally Posted by BucksSS

...and 600HP!!

Quote:

Originally Posted by jrdv

Mine has not been touched in a while. We are in a drought and I spend all my time feeding cattle. Most will be sold by the end of the month.
I will have more shop time this summer, although I may have to find a side job for a while. Still up for a Florida trip tho!

John

Roger that. I'll try to give you a heads up when I have something planned.

Quote:

Originally Posted by Moccelin

And here is the why I want to put an L99+6L80 in my Chevrolet Veraneio. First because the L99 is the only V-8 engine avaiable around here, and since playboys are starting to destroy Camaros SS maybe I could find one. But the main reason is that even stock I will get 3 times the power, and something something lower than 2 times the torque that I have with my L6 261 (first gen stovebolt). And everyting with higher kilometrages (milleages) per liter (galon). But in my case I want the AFM, VVT, etc...

, I probably should have left it alone, but that would have been to easy...:LOL:.

Quote:

Originally Posted by EZ SPEED

Thas prob pretty close...my SS gets right at 15 mpg with 735 rwhp ... if I drive it somewhat decent...LOL

**Hart_Rod** · 05-09-2013, 06:34 PM

Well I had to pull the oil pan in order remove the oil pump in order to install the LS2 timing chain dampner in order to change the cam in order to delete the VVT.....seems like this project just continues to snowball down hil....LOL. Oh well, got that done now, I think....finally....I can start putting it back together for good,

.

NewType72 · 05-13-2013, 12:02 PM

Man oh man that's certainly out of my knowledgable reach for those kinda of swaps. Kudos to you on tackling this endeavor of a motor I'm sure shell be perfect for ya when wrapped up.
Posted via Mobile Device

big_al_71 · 05-13-2013, 04:45 PM

Looking great this far...Cant wait to see the video and then send you sylvester for it's ls6 swap

**Hart_Rod** · 05-19-2013, 11:03 AM

Quote:

Originally Posted by NewType72

Man oh man that's certainly out of my knowledgable reach for those kinda of swaps. Kudos to you on tackling this endeavor of a motor I'm sure shell be perfect for ya when wrapped up.
Posted via Mobile Device

Thanks! Just do some research and watch a youtube video or two and you can do this too...

...

.

Quote:

Originally Posted by big_al_71

Looking great this far...Cant wait to see the video and then send you sylvester for it's ls6 swap

Thanks!

, I do have a couple more ahead of him,

.

***
Well it's starting to look like a motor again (PICS!). My buddy Joe and I installed the oil pan, front timing cover and the bolted the heads back on. I still need to recheck the torque on the head bolts and then I'll put in the new pushrods and the rocker arms. When I'm done with the that, I think I going to do a test fit of the engine/tranny. I'm tempted to try it without installing the high hump, but I'm 95% sure it won't fit.....

jmedero · 05-19-2013, 12:36 PM

Looking good man.
Posted via Mobile Device

**Hart_Rod** · 05-25-2013, 10:13 AM

Quote:

Originally Posted by jmedero

Looking good man.
Posted via Mobile Device

Thanks Bro!

Ernie came over yesterday and between the 2 of us (Ernie did most of the work,

), we got the high hump installed. After finishing that up, we put the motor in for a test fit. Well almost, the 2013 Camaro pan isn't going to work,

. I thought it would be close, but we confirmed it wouldn't. Two steps forward and one back...

. I ordered a 2007 Cadillac CTSV pan last night and it should be here early next week. It's the same one I have on the suburban and should fix the problem. I also think I have the accessory brackets figured out. I ordered a set of the Holley LS brackets. Hopefully they will work for my truck and Jakes 68....fingers crossed! Picture time!

C10_ustacould · 05-25-2013, 10:55 AM

It's not often that someone asks you to cut a hole in a pristine '68 C10 floor... you just have to say yes when it happens!

**Hart_Rod** · 05-25-2013, 11:35 AM

Quote:

Originally Posted by BucksSS

It's not often that someone asks you to cut a hole in a pristine '68 C10 floor... you just have to say yes when it happens!

:LOL:! Forgot to post the pictures of the motor being "almost in"....

Rusbuilt · 05-25-2013, 04:23 PM

Oh yes my friend!! Love it!

502ms · 05-25-2013, 05:40 PM

Coming along nicely. Yes, we did just do that...luckily, the new cab was a factory high hump
Posted via Mobile Device

jmedero · 05-25-2013, 09:34 PM

Posted via Mobile Device
Sure wished I lived closer so I could be a part of cool things like this.....

Lol
Posted via Mobile Device

Bennett68C10 · 05-25-2013, 11:24 PM

Motor looks great in there Rob, your making me wish I had and LS in mine instead of the BBC.
Posted via Mobile Device

05-02-2013, 03:07 PM	#901
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: 68 S/C update..... I can snap a few later today and get them to you. There is plenty of room though. Do you know off the top of your head what the hose on top of the tranny goes to? I thought it was just a vent, but it has a "T" fitting on it, like it had a hose going somewhere. Posted via Mobile Device __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

05-02-2013, 03:51 PM	#902
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,859	Re: 68 S/C update..... I'm pretty sure it's just a vent. __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

05-02-2013, 06:31 PM	#903
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: 68 S/C update..... Pictures as requested. Sorry for the poor quality, camera phone and its hard to get in there really close. You can see the vent thing I'm talking about. I would say there is about 2" of space, maybe even a little more. However I still have to make sure I'm leveled out at the right driveline angle. I used the spacers that were on the th400 mount, but the engine still seams to dip down, and the tranny pan doesn't appear to be level. I need to get out my angle measurer and check the angle. Attached Images __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

05-06-2013, 04:51 PM	#905
Dova Registered User Join Date: Jul 2007 Location: Silverdale, WA Posts: 263	Re: 68 S/C update..... Very nice build, sat down and read through it all today. What kind of fuel mileage do you think you'll be getting with the 6.2 combo?

05-06-2013, 10:52 PM	#906
jrdv Registered User Join Date: Apr 2000 Location: new mexico Posts: 948	Re: 68 S/C update..... Dammit, You are gonna screw up my plans for a Florida visit. Quit getting so much done. John __________________ 1972 3/4T 4x4 Chevrolet (383) 1971 c-10 SWB (400 sb) 1972 4x4 Blazer 1969 SWB 4x4 GMC Projects: 1972 stepside 4x4 http://67-72chevytrucks.com/vboard/s...d.php?t=280132 http://67-72chevytrucks.com/vboard/s...d.php?t=285952 http://67-72chevytrucks.com/vboard/s...d.php?t=553672 http://67-72chevytrucks.com/vboard/s...d.php?t=522704

05-07-2013, 09:48 PM	#908
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 68 S/C update..... thats some cool vids !!!! __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

05-08-2013, 05:39 AM	#910
Moccelin Registered User Join Date: Dec 2012 Location: Varginha - MG - Brazil Posts: 8	Re: 68 S/C update..... And here is the why I want to put an L99+6L80 in my Chevrolet Veraneio. First because the L99 is the only V-8 engine avaiable around here, and since playboys are starting to destroy Camaros SS maybe I could find one. But the main reason is that even stock I will get 3 times the power, and something something lower than 2 times the torque that I have with my L6 261 (first gen stovebolt). And everyting with higher kilometrages (milleages) per liter (galon). But in my case I want the AFM, VVT, etc... __________________ Chevrolet Veraneio 1971 (Brazil)

05-09-2013, 06:34 PM	#914
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,859	Re: 68 S/C update..... Well I had to pull the oil pan in order remove the oil pump in order to install the LS2 timing chain dampner in order to change the cam in order to delete the VVT.....seems like this project just continues to snowball down hil....LOL. Oh well, got that done now, I think....finally....I can start putting it back together for good, . Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

05-13-2013, 12:02 PM	#915
NewType72 Registered User Join Date: Feb 2012 Location: turlock Posts: 2,177	Re: 68 S/C update..... Man oh man that's certainly out of my knowledgable reach for those kinda of swaps. Kudos to you on tackling this endeavor of a motor I'm sure shell be perfect for ya when wrapped up. Posted via Mobile Device __________________ Project NewType 1972 Chevy C/10 Cheyenne Super ( Daily Driven Showtruck ) http://67-72chevytrucks.com/vboard/s...d.php?t=507903 Project Great Grandpa's Legacy 1973 Chevy C/10 Cheyenne ( Current daily driver collecting big time parts ) http://67-72chevytrucks.com/vboard/s...89#post7084289 - Dylan (209)-985-7721

05-13-2013, 04:45 PM	#916
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: 68 S/C update..... Looking great this far...Cant wait to see the video and then send you sylvester for it's ls6 swap __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

05-19-2013, 12:36 PM	#918
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 68 S/C update..... Looking good man. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

05-25-2013, 10:55 AM	#920
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: 68 S/C update..... It's not often that someone asks you to cut a hole in a pristine '68 C10 floor... you just have to say yes when it happens! __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

05-25-2013, 04:23 PM	#922
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: 68 S/C update..... Oh yes my friend!! Love it! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

05-25-2013, 05:40 PM	#923
502ms Registered User Join Date: Aug 2011 Location: Atlanta, GA Posts: 1,523	Re: 68 S/C update..... Coming along nicely. Yes, we did just do that...luckily, the new cab was a factory high hump Posted via Mobile Device __________________ Best Regards, Leon M. Instagram: @TheDirtyDianah Bagged \| 6.0L LS \| T-56 (6-Speed Manual) \| Turbo Burnout/Rolling Video: Chevy C10 Stepside 6.0L LSx & 6-Speed Manual

05-25-2013, 09:34 PM	#924
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 68 S/C update..... Posted via Mobile Device Sure wished I lived closer so I could be a part of cool things like this..... Lol Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084



Register or Log In To remove these advertisements.

05-25-2013, 11:24 PM	#925
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: 68 S/C update..... Motor looks great in there Rob, your making me wish I had and LS in mine instead of the BBC. Posted via Mobile Device __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

Register or Log In To remove these advertisements.