Post your C/L - Facebook finds for everyone to enjoy! - Page 37 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

51 3600 · 05-10-2022, 09:02 PM

Quote:

Originally Posted by HO455

Early HO52 if anyone needs it or parts. Not mine.

https://bend.craigslist.org/pts/d/be...481413333.html

Eaton HO52 rear end from a running 1949 Chevy 3600 pickup. Believe it's 4.57. Free if you need it.
It's going to scrap if nobody takes it.

If it's a 4.57 and I'm not mistaking (common at my age) rock crawler folks pay big bucks for those.

**Dan in Pasadena** · 04-24-2022, 01:48 PM

https://losangeles.craigslist.org/lg...475266815.html

Not a bad starting point.

**mr48chev** · 05-05-2022, 09:46 PM

57 "plow truck" with plow. Snow that is.

Looks to be on a later 4x4 chassis

https://yakima.craigslist.org/cto/d/...469306619.html

**mr48chev** · 05-10-2022, 09:24 PM

That's 200 miles south of me. I'd want a bit newer rear axle for a crawler though.

**mr48chev** · 05-15-2022, 01:54 AM

The windshield posts are cut too short but if someone here in the PNW needs cab parts it might be a deal. It's here in the town I live in.
https://www.facebook.com/marketplace...type=top_picks

If he hadn't cut the posts off so short I'd buy it to use the cowl in my build rather than what I have but I have a couple of cabs that I can rob anyhow.

**mr48chev** · 05-15-2022, 02:03 AM

Something a bit different. A chassis fab table. It's in Benton city Wa. Right close to the Red Mountain wine area.
https://www.facebook.com/marketplace...2111112l%22%7D

I'm thinking that you would be hard pressed to buy the steel tubing, steel and casters to build it for the asking price.

**mr48chev** · 05-15-2022, 02:51 AM

Well they did list the auction on FB market place.

This is an auto auction house that I have bought from before and they are good to deal with. No nonsense but they do charge 10% plus pretty stiff fees to do the paperwork. I bought a VW Passsat from them a couple of years ago.

There is a pretty nice 57 3100 Big window with a big block and a patina rust 47 on the second page plus some other GM trucks

https://www.trucksandauto.com/auctio...ndEnabled=true

**mr48chev** · 05-17-2022, 03:54 PM

51 GMC Panel in Graham WA (close to Tacoma) Pretty much a what you see what you get but looks solid.

https://www.facebook.com/marketplace...type=top_picks

**mr48chev** · 05-19-2022, 12:14 AM

This guy has been trying to sell this TF Burb body on an AD group on fb that some others here might be on. His name is Bill Lanes He is Anaconda Montana and seems legit. Not a lot there but I think the asking price was 1000 and if someone is looking for a burb to start a project with it might work.

I've never seen a front photo so I'd be asking for lots of photos.

daveshilling · 05-19-2022, 04:17 PM

Quote:

Originally Posted by mr48chev

This guy has been trying to sell this TF Burb body on an AD group on fb that some others here might be on. His name is Bill Lanes He is Anaconda Montana and seems legit. Not a lot there but I think the asking price was 1000 and if someone is looking for a burb to start a project with it might work.

I've never seen a front photo so I'd be asking for lots of photos.

I've always wondered if you could use one of these to make steel cameo bedsides... for $1000 it might be worth the head start! I see these and always imagine chopping them up somehow... Convert it to a 2 door, 2 bench pickup?

_Ogre · 05-20-2022, 11:46 AM

Quote:

Originally Posted by daveshilling

I've always wondered if you could use one of these to make steel cameo bedsides... for $1000 it might be worth the head start! I see these and always imagine chopping them up somehow... Convert it to a 2 door, 2 bench pickup?

i briefly thought about making a roadster out of my panel, briefly

my panel is lwb, it'd be like an roadster coolbus

nvrdone · 05-19-2022, 09:29 PM

i guess its all about how good your body working skills are. Maybe have to move the wheel well lip and shorten it over all.

**mr48chev** · 05-19-2022, 11:10 PM

The wheelbase is the same for the same series pickup, panel or burb. It would end up being cut what ever distance you have from the door To the back of the cab plus clearance space. Then use a clam shell tail gate.

I'd love to have a TF burb but am pretty well big projected out. I'm trying to buy an OT project car now that I have to go to Montana to get but that is an engine swap and done car if it works out. That means that I sell off about three other rigs in the process though.

**mr48chev** · 05-21-2022, 01:22 AM

59 Shortie in a basket in Pasco. wa.

I fixed it, no more wheel studs from Advance auto parts

https://www.facebook.com/marketplace...e-62402095ba12

**Rickysnickers** · 05-21-2022, 11:10 AM

Quote:

Originally Posted by mr48chev

59 Shortie in a basket in Pasco WA.

https://shop.advanceautoparts.com/we...0051&langId=-1

I think you may have attached the wrong website to this post

**mr48chev** · 05-21-2022, 06:35 PM

Quote:

Originally Posted by Rickysnickers

I think you may have attached the wrong website to this post

That will teach me to stay up too late watching Youtube.

**Rickysnickers** · 05-22-2022, 09:45 AM

Quote:

Originally Posted by mr48chev

that will teach me to stay up too late watching youtube.

hahahahahaha!!!!

**mr48chev** · 05-21-2022, 11:07 PM

A pretty solid 54 (fixed it) 3 window cab in West Lind Oregon for a fairly honest price.
https://www.facebook.com/commerce/li...are_attachment

nvrdone · 05-21-2022, 11:42 PM

maybe im wrong but that looks like a 54 cab. I thought 53's still had the split windshield

**mr48chev** · 05-22-2022, 02:33 AM

Quote:

Originally Posted by nvrdone

maybe im wrong but that looks like a 54 cab. I thought 53's still had the split windshield

Fixed it, thanks for being the proof reader.

**mr48chev** · 05-22-2022, 03:16 AM

52 3100 original chassis with V8 and automatic Yakima WA. 26K

https://www.facebook.com/marketplace...type=top_picks

Pretty nice truck that I used to see at events around here once in a while.

**mr48chev** · 05-22-2022, 03:23 PM

I[m beginning to think it is sell off your old trucks month around here.

This is a 54 2 ton with a bunch of parts that most might not want but the price isn't bad if you are in need of a 54 cab here in the PNW or want to build a big truck.
https://www.facebook.com/marketplace...type=top_picks

It's up in Tieton a bit off the path.

**jocko** · 06-08-2022, 10:00 PM

59 NAPCO 3800 $12K
Missing its original 9' stepside bed.

**mr48chev** · 06-08-2022, 10:35 PM

Those shots of the Napco equipment and decals might well be worth saving for reference.
Still the value of a Napco truck is all in the originality of the Napco conversion and a later non TF rear axle is not and "upgrade" value wise.

Dang I'm starting to talk like a restorer. The shame.

leegreen · 06-10-2022, 03:01 PM

https://comoxvalley.craigslist.org/p...493586580.html

$500 Canadian AD frame with mustangII, newer rearend for $500 on vancouver island looks like a good deal. I am glad it is too far from me or I'd be compelled to buy it.
Name: frame.JPG
Views: 627
Size: 65.4 KB

Name: frame.JPG
Views: 627
Size: 65.4 KB

04-24-2022, 01:48 PM	#2
Dan in Pasadena Senior Member Join Date: Nov 2008 Location: Glendora, CA Posts: 6,339	Re: Post your C/L finds for everyone to enjoy! https://losangeles.craigslist.org/lg...475266815.html Not a bad starting point. Attached Images __________________ '55 Big Window Shortbed, Drive-It-&-Work-On-It slid down the "slippery slope" to a Frame-Off Rodstoration! LQ4/4l85e/C4 IFS/Mustang 8.8 rearend w/3.73's Dan's '55 Big Window "Build" - Well, Kinda!

05-05-2022, 09:46 PM	#3
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,632	Re: Post your C/L finds for everyone to enjoy! 57 "plow truck" with plow. Snow that is. Looks to be on a later 4x4 chassis https://yakima.craigslist.org/cto/d/...469306619.html Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

05-10-2022, 09:24 PM	#4
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,632	Re: Post your C/L finds for everyone to enjoy! That's 200 miles south of me. I'd want a bit newer rear axle for a crawler though. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

05-15-2022, 01:54 AM	#5
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,632	Re: Post your C/L finds for everyone to enjoy! The windshield posts are cut too short but if someone here in the PNW needs cab parts it might be a deal. It's here in the town I live in. https://www.facebook.com/marketplace...type=top_picks If he hadn't cut the posts off so short I'd buy it to use the cowl in my build rather than what I have but I have a couple of cabs that I can rob anyhow. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

05-15-2022, 02:03 AM	#6
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,632	Re: Post your C/L finds for everyone to enjoy! Something a bit different. A chassis fab table. It's in Benton city Wa. Right close to the Red Mountain wine area. https://www.facebook.com/marketplace...2111112l%22%7D I'm thinking that you would be hard pressed to buy the steel tubing, steel and casters to build it for the asking price. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

05-15-2022, 02:51 AM	#7
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,632	Re: Post your C/L finds for everyone to enjoy! Well they did list the auction on FB market place. This is an auto auction house that I have bought from before and they are good to deal with. No nonsense but they do charge 10% plus pretty stiff fees to do the paperwork. I bought a VW Passsat from them a couple of years ago. There is a pretty nice 57 3100 Big window with a big block and a patina rust 47 on the second page plus some other GM trucks https://www.trucksandauto.com/auctio...ndEnabled=true Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

05-17-2022, 03:54 PM	#8
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,632	Re: Post your C/L finds for everyone to enjoy! 51 GMC Panel in Graham WA (close to Tacoma) Pretty much a what you see what you get but looks solid. https://www.facebook.com/marketplace...type=top_picks __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

05-19-2022, 12:14 AM	#9
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,632	Re: Post your C/L finds for everyone to enjoy! This guy has been trying to sell this TF Burb body on an AD group on fb that some others here might be on. His name is Bill Lanes He is Anaconda Montana and seems legit. Not a lot there but I think the asking price was 1000 and if someone is looking for a burb to start a project with it might work. I've never seen a front photo so I'd be asking for lots of photos. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

05-19-2022, 09:29 PM	#12
nvrdone Registered User Join Date: Dec 2011 Location: Moxee WA Posts: 1,479	Re: Post your C/L finds for everyone to enjoy! i guess its all about how good your body working skills are. Maybe have to move the wheel well lip and shorten it over all. __________________ 49 chevy 3100 3 window. 327 / m21 4 spd, 12 bolt w/ 3:55's Bought in 1973 for $235.00. Had it longer than my wife & Kids!!

05-19-2022, 11:10 PM	#13
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,632	Re: Post your C/L finds for everyone to enjoy! The wheelbase is the same for the same series pickup, panel or burb. It would end up being cut what ever distance you have from the door To the back of the cab plus clearance space. Then use a clam shell tail gate. I'd love to have a TF burb but am pretty well big projected out. I'm trying to buy an OT project car now that I have to go to Montana to get but that is an engine swap and done car if it works out. That means that I sell off about three other rigs in the process though. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

05-21-2022, 01:22 AM	#14
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,632	Re: Post your C/L finds for everyone to enjoy! 59 Shortie in a basket in Pasco. wa. I fixed it, no more wheel studs from Advance auto parts https://www.facebook.com/marketplace...e-62402095ba12 Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. Last edited by mr48chev; 05-21-2022 at 06:42 PM.

05-21-2022, 11:07 PM	#18
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,632	Re: Post your C/L finds for everyone to enjoy! A pretty solid 54 (fixed it) 3 window cab in West Lind Oregon for a fairly honest price. https://www.facebook.com/commerce/li...are_attachment Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. Last edited by mr48chev; 05-22-2022 at 02:32 AM.

05-21-2022, 11:42 PM	#19
nvrdone Registered User Join Date: Dec 2011 Location: Moxee WA Posts: 1,479	Re: Post your C/L finds for everyone to enjoy! maybe im wrong but that looks like a 54 cab. I thought 53's still had the split windshield __________________ 49 chevy 3100 3 window. 327 / m21 4 spd, 12 bolt w/ 3:55's Bought in 1973 for $235.00. Had it longer than my wife & Kids!!

05-22-2022, 03:16 AM	#21
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,632	Re: Post your C/L finds for everyone to enjoy! 52 3100 original chassis with V8 and automatic Yakima WA. 26K https://www.facebook.com/marketplace...type=top_picks Pretty nice truck that I used to see at events around here once in a while. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

05-22-2022, 03:23 PM	#22
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,632	Re: Post your C/L finds for everyone to enjoy! I[m beginning to think it is sell off your old trucks month around here. This is a 54 2 ton with a bunch of parts that most might not want but the price isn't bad if you are in need of a 54 cab here in the PNW or want to build a big truck. https://www.facebook.com/marketplace...type=top_picks It's up in Tieton a bit off the path. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.



Register or Log In To remove these advertisements.

06-08-2022, 10:00 PM	#23
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,976	Re: Post your C/L finds for everyone to enjoy! 59 NAPCO 3800 $12K Missing its original 9' stepside bed. Attached Images

06-08-2022, 10:35 PM	#24
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,632	Re: Post your C/L finds for everyone to enjoy! Those shots of the Napco equipment and decals might well be worth saving for reference. Still the value of a Napco truck is all in the originality of the Napco conversion and a later non TF rear axle is not and "upgrade" value wise. Dang I'm starting to talk like a restorer. The shame. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

06-10-2022, 03:01 PM	#25
leegreen Registered User Join Date: Mar 2022 Location: Surrey BC Posts: 870	Re: Post your C/L finds for everyone to enjoy! https://comoxvalley.craigslist.org/p...493586580.html $500 Canadian AD frame with mustangII, newer rearend for $500 on vancouver island looks like a good deal. I am glad it is too far from me or I'd be compelled to buy it.

Register or Log In To remove these advertisements.