Let's see those slant noses. Calling all 67's & 68's, clips too. - Page 37 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mudd_rock_17 · 08-09-2014, 09:21 PM

My 67' C10

MattPSU · 09-09-2014, 02:06 PM

I've been following this thread since Shawn started it more than 2 years ago and this past weekend I finally picked up a 68 clip minus hood to swap onto my 72.

The driver fender, inner fender and grill are all in great shape. The passenger inner fender and support have seen better days and will probably be replaced. The passenger fender needs a front lower cup and it looks to have been replaced at some point. I'm thinking it's a newer GMC since there were upper trim holes that have been filled.

I'll need to work on some of the parts and I'll need a hood and radiator support, but for $150.00 I couldn't pass it up. I figure just the little stuff - braces, hood latch, splash shield, etc. are worth $100 or more alone.

chopnchaneled · 09-09-2014, 03:02 PM

Congrats,,, Looks like a good start to me,

**Elliot949** · 09-09-2014, 04:04 PM

Quote:

Originally Posted by MattPSU

I've been following this thread since Shawn started it more than 2 years ago and this past weekend I finally picked up a 68 clip minus hood to swap onto my 72.

The driver fender, inner fender and grill are all in great shape. The passenger inner fender and support have seen better days and will probably be replaced. The passenger fender needs a front lower cup and it looks to have been replaced at some point. I'm thinking it's a newer GMC since there were upper trim holes that have been filled.

I'll need to work on some of the parts and I'll need a hood and radiator support, but for $150.00 I couldn't pass it up. I figure just the little stuff - braces, hood latch, splash shield, etc. are worth $100 or more alone.

That is a sweet setup...

trac209 · 09-09-2014, 04:38 PM

Current pic of my 68

**BlueBullet** · 09-09-2014, 07:08 PM

Here is a '68 C30 I picked up a week ago.

**Elliot949** · 09-09-2014, 08:20 PM

Quote:

Originally Posted by BlueBullet

Here is a '68 C30 I picked up a week ago.

That is AWESOME!!!!

**BlueBullet** · 09-09-2014, 08:34 PM

Thanks!! I was pretty excited to get it didn't sleep much the night before. It didn't run when I bought it put a temporary fuel line on it and a battery. Checked fluids. And she fired right up. Came with nice buddy buckets and 292 4 speed. Camper is pretty rough going to put a flatbed on it.

Expat_dude · 09-09-2014, 11:03 PM

1970 with a 67 clip

Bennett68C10 · 09-09-2014, 11:08 PM

That is a beautiful truck, awesome job Expat_dude

txclassics · 09-10-2014, 12:19 AM

daily driver

**Elliot949** · 09-10-2014, 07:18 AM

Quote:

Originally Posted by txclassics

daily driver

Cool Truck... love the wide whites...

OregonNed · 09-10-2014, 06:29 PM

a newer picture of the '68

**zicc1835** · 09-10-2014, 09:21 PM

Let's do an update

**Elliot949** · 09-11-2014, 06:13 AM

Quote:

Originally Posted by OregonNed

a newer picture of the '68

Beautiful Truck...

Ft.ValloniaStreaker · 09-11-2014, 12:11 PM

Name: photo.jpg
Views: 1301
Size: 51.3 KB

this is as close to looking like a truck as it's been for a while

cdngearhead · 09-13-2014, 08:55 PM

One for my collection

scotts72heavyhalf · 09-13-2014, 09:48 PM

My 14 year old sons truck. Here are the pefore pics

scotts72heavyhalf · 09-13-2014, 09:53 PM

And the after pics

skorpioskorpio · 09-13-2014, 11:48 PM

Quote:

Originally Posted by txclassics

daily driver

Wide whites, roll pan, daily driver, fear no evil, apparently.

**kitsbeach** · 10-11-2014, 11:45 AM

Here one of mine to keep the thread going forever..!

68Gold/white · 10-11-2014, 03:22 PM

Quote:

Originally Posted by nicks diner

This was taken 9 months earlier. Should be ready end of May, 5/7 drop built roller 406 ready to go, posi 3,75 gears all new interior, satin black paint. I cant wait especially looking at all these beautys on this forum.

Good choice on the engine!!! I hear of 383 builds, owner will say, I put a stoker crank in a 350.....I say, Why didn't you use the stroker block also, so the thing can breathe....Ought to be real fun to drive!!!

Wildcard · 10-18-2014, 12:23 AM

Here is my 67, this is today just after I finished rebuilding the front suspension and cutting 1 1/2 coils off the front, still need to install the rear drop springs

Wildcard

cdngearhead · 10-18-2014, 12:40 AM

Awesome unit

Lees68GMC · 10-18-2014, 08:07 AM

I Love 67 and 68 GMCs here's my old 67 and the 68 I have now

08-09-2014, 09:21 PM	#901
Mudd_rock_17 Registered User Join Date: Aug 2014 Location: Meridian, ID Posts: 3	Re: Let's see those slant noses. Calling all 67's & 68's, clips too. My 67' C10 Attached Images

09-09-2014, 02:06 PM	#902
MattPSU Registered User Join Date: Nov 2011 Location: Lyman, SC Posts: 734	Re: Let's see those slant noses. Calling all 67's & 68's, clips too. I've been following this thread since Shawn started it more than 2 years ago and this past weekend I finally picked up a 68 clip minus hood to swap onto my 72. The driver fender, inner fender and grill are all in great shape. The passenger inner fender and support have seen better days and will probably be replaced. The passenger fender needs a front lower cup and it looks to have been replaced at some point. I'm thinking it's a newer GMC since there were upper trim holes that have been filled. I'll need to work on some of the parts and I'll need a hood and radiator support, but for $150.00 I couldn't pass it up. I figure just the little stuff - braces, hood latch, splash shield, etc. are worth $100 or more alone. Attached Images __________________ Matt Criswell - Lyman, SC 1972 Chevy Cheyenne SWB - Build: Porterbuilt State 1 Front & Rear, Bolt in Notch, McGaughys 2.5 Drop Spindles, Boyd Welding Fuel Tank UPSTATE SC GM TRUCK CLUB: FACEBOOK WEBSITE

09-09-2014, 03:02 PM	#903
chopnchaneled Registered User Join Date: Dec 2009 Location: Atlanta, Ga. Posts: 1,050	Re: Let's see those slant noses. Calling all 67's & 68's, clips too. Congrats,,, Looks like a good start to me, __________________ I don't think we get smarter as we get older. We just run out of Stupid things to do.

09-09-2014, 04:38 PM	#905
trac209 Registered User Join Date: Dec 2011 Location: winnipeg Posts: 1,107	Re: Let's see those slant noses. Calling all 67's & 68's, clips too. Current pic of my 68 Attached Images

09-09-2014, 07:08 PM	#906
BlueBullet Senior Member Join Date: Apr 2013 Location: Danvers Minnesota Posts: 967	Re: Let's see those slant noses. Calling all 67's & 68's, clips too. Here is a '68 C30 I picked up a week ago. Attached Images __________________ 1972 K10 SWB wife's driver 1967 Pontiac GTO Big Bird - 1972 Longhorn K30 http://67-72chevytrucks.com/vboard/s...d.php?t=753294

09-09-2014, 08:34 PM	#908
BlueBullet Senior Member Join Date: Apr 2013 Location: Danvers Minnesota Posts: 967	Re: Let's see those slant noses. Calling all 67's & 68's, clips too. Thanks!! I was pretty excited to get it didn't sleep much the night before. It didn't run when I bought it put a temporary fuel line on it and a battery. Checked fluids. And she fired right up. Came with nice buddy buckets and 292 4 speed. Camper is pretty rough going to put a flatbed on it. __________________ 1972 K10 SWB wife's driver 1967 Pontiac GTO Big Bird - 1972 Longhorn K30 http://67-72chevytrucks.com/vboard/s...d.php?t=753294

09-09-2014, 11:03 PM	#909
Expat_dude Registered User Join Date: Jul 2012 Location: Brookhaven, Ms/ Sakhalin Russia Posts: 370	Re: Let's see those slant noses. Calling all 67's & 68's, clips too. 1970 with a 67 clip __________________ 1970 Chevy swb, project UGHH! 1987 Grand National http://s168.photobucket.com/albums/u.../1970%20Chevy/

09-09-2014, 11:08 PM	#910
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Let's see those slant noses. Calling all 67's & 68's, clips too. That is a beautiful truck, awesome job Expat_dude __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

09-10-2014, 12:19 AM	#911
txclassics Registered User Join Date: Mar 2012 Location: Fort Worth Texas Posts: 28	Re: Let's see those slant noses. Calling all 67's & 68's, clips too. daily driver Attached Images

09-10-2014, 06:29 PM	#913
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: Let's see those slant noses. Calling all 67's & 68's, clips too. a newer picture of the '68 __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop

09-10-2014, 09:21 PM	#914
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,298	Re: Let's see those slant noses. Calling all 67's & 68's, clips too. Let's do an update Attached Images __________________ Grand Theft Auto https://67-72chevytrucks.com/vboard/...d.php?t=855961 Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557

09-11-2014, 12:11 PM	#916
Ft.ValloniaStreaker Registered User Join Date: Jul 2013 Location: Southern Indiana Posts: 160	Re: Let's see those slant noses. Calling all 67's & 68's, clips too. this is as close to looking like a truck as it's been for a while

09-13-2014, 08:55 PM	#917
cdngearhead Registered User Join Date: Feb 2014 Location: Kelowna BC Posts: 73	Re: Let's see those slant noses. Calling all 67's & 68's, clips too. One for my collection Attached Images

09-13-2014, 09:48 PM	#918
scotts72heavyhalf Registered User Join Date: Aug 2007 Location: Sandy, Oregon Posts: 1,551	Re: Let's see those slant noses. Calling all 67's & 68's, clips too. My 14 year old sons truck. Here are the pefore pics Attached Images __________________ Scotts72C10

09-13-2014, 09:53 PM	#919
scotts72heavyhalf Registered User Join Date: Aug 2007 Location: Sandy, Oregon Posts: 1,551	Re: Let's see those slant noses. Calling all 67's & 68's, clips too. And the after pics Attached Images __________________ Scotts72C10



Register or Log In To remove these advertisements.

10-11-2014, 11:45 AM	#921
kitsbeach Senior Member Join Date: May 2014 Location: Vancouver, BC Posts: 591	Re: Let's see those slant noses. Calling all 67's & 68's, clips too. Here one of mine to keep the thread going forever..! Attached Images __________________ Kitsbeach (Ken) 1967 C10 LWB (now SWB) Fleetside 6cyl Saginaw three-on-the-tree "No Frills" 1980 C20 Long to short & static drop "Square One"

10-18-2014, 12:23 AM	#923
Wildcard Registered User Join Date: Sep 2014 Location: Clarkston, WA Posts: 57	Re: Let's see those slant noses. Calling all 67's & 68's, clips too. Here is my 67, this is today just after I finished rebuilding the front suspension and cutting 1 1/2 coils off the front, still need to install the rear drop springs Wildcard Attached Images

10-18-2014, 12:40 AM	#924
cdngearhead Registered User Join Date: Feb 2014 Location: Kelowna BC Posts: 73	Re: Let's see those slant noses. Calling all 67's & 68's, clips too. Awesome unit

10-18-2014, 08:07 AM	#925
Lees68GMC Registered User Join Date: Jul 2013 Location: Prescott Arizona Posts: 343	Re: Let's see those slant noses. Calling all 67's & 68's, clips too. I Love 67 and 68 GMCs here's my old 67 and the 68 I have now Attached Images __________________ 68 GMC SWB Vortec 5.3 98 Chevy Blazer ZR2 94 Mazda Miata, LS2 6 speed, sold "No matter what happens, nobody gets out alive"

Register or Log In To remove these advertisements.