Do you need '64-'66 Chevy Truck Parts?

[LILRED66]

1965Cowboy:

Is it possible to send me a picture of the dash and the underhood area at the heater? These trucks had a Deluxe-Air (3-lever dash control) or Thrift-Air (single pull knob dash contol), so it is your choice on which one to use. I have the complete assembly for both, including the dash controls, underdash box, underhood box, heater core & fan blower. With either set-up, you will need to run a supply and return hose to the water pump & intake to circulate coolant. I can provide the hoses and threaded connectors, as well, if you need these items.

[1965Cowboy]

I'll send you a picture tomorrow. thanks

[jonathan-m]

Hey Tony,
Do you have the taillight bezels and the light housings for a fleetside? I have a set of lenses, but I need the housing and bezel to go with them. Also, how about battery tie downs?

[LILRED66]

Originally Posted by jonathan-m

Hey Tony,
Do you have the taillight bezels and the light housings for a fleetside? I have a set of lenses, but I need the housing and bezel to go with them. Also, how about battery tie downs?

Yes and yes. Do you also need the factory bucket screws and the factory lense screws?

[jonathan-m]

Yes, I could use the screws as well. What would the price be on the tail light items?

[LILRED66]

Originally Posted by jonathan-m

Yes, I could use the screws as well. What would the price be on the tail light items?

PM sent. Please let me know if I can help and thanks for the opportunity.

[66coffin]

hey lil red, wondering if you sent my tank straps yet, 'cause i need the tank rubber filler neck too. let me know how much and if you have to ship it separate.

[Nick's81]

looking for a 456 grill plain no crome does not have to be perfict oh and squrl cadge for heater fan 64 delux heater shiped to 97501

[LILRED66]

Originally Posted by Nick's81

looking for a 456 grill plain no crome does not have to be perfict oh and squrl cadge for heater fan 64 delux heater shiped to 97501

Thanks for the inquiry. I have several nice painted 4-5-6 Chevy truck grille assemblies. Do you need the entire assembly, including the mounting brackets, buckets, rings, bezels & harness or just the shell?

[LILRED66]

Originally Posted by 66coffin

hey lil red, wondering if you sent my tank straps yet, 'cause i need the tank rubber filler neck too. let me know how much and if you have to ship it separate.

Did you get your tube with the tank straps, cushions & bolts? I do have the rubber filler neck, the plastic filler neck, the hose clamps and a factory chrome gas cap, so let me know which items you want/need and I will price them, including shipping.

[66coffin]

Originally Posted by LILRED66

Did you get your tube with the tank straps, cushions & bolts? I do have the rubber filler neck, the plastic filler neck, the hose clamps and a factory chrome gas cap, so let me know which items you want/need and I will price them, including shipping.

ok tony got the straps today, thanks. so how much for the rubber filler neck to 91765?

[LILRED66]

Originally Posted by 66coffin

ok tony got the straps today, thanks. so how much for the rubber filler neck to 91765?

Good deal. The filler neck assembly consists of:

rubber filler neck hose
two tower clamps
plastic filler neck that holds cap
fuel tank cap
rubber filler neck grommet

If you need this entire set-up, if is $52.00, including shipping. If you just need the rubber hose, you should pick it up from your local auto parts store for a few bucks.

I accept PayPal at: 4-5-6chevytrucks@sbcglobal.net

Let me know what parts you need and I will reply accordingly. Thanks for the opportunity and enjoy the day.

[Hart_Rod]

Tony,

Looks like you're the "King" of the 4-5-6 stuff, . What would be a good price for a take-off tailgate? I'm a 67-72 guy, but found this one locally and couldn't pass on it, . I would really like to trade it for a similar condition 67-72 tailgate for one of my trucks. You wouldn't happen to have one of those in your stash would ya? Take care.

R/

[LILRED66]

Originally Posted by Hart_Rod

Tony,

Looks like you're the "King" of the 4-5-6 stuff, . What would be a good price for a take-off tailgate? I'm a 67-72 guy, but found this one locally and couldn't pass on it, . I would really like to trade it for a similar condition 67-72 tailgate for one of my trucks. You wouldn't happen to have one of those in your stash would ya? Take care.

R/

Super nice gate! I specialize in '60-'66 Chevy/GMC trucks and parts, therefore, I don't have any other years. Are you interested in any other items, in trade?

I sell excellent, used, rust-free, dent-free fleetside tailgates for $300.00, but I would think you can get more than that for your take-off gate, tut it is hard to say, what it will bring. Good luck and thanks for the kind words.

[Hart_Rod]

Originally Posted by LILRED66

Super nice gate! I specialize in '60-'66 Chevy/GMC trucks and parts, therefore, I don't have any other years. Are you interested in any other items, in trade?

I sell excellent, used, rust-free, dent-free fleetside tailgates for $300.00, but I would think you can get more than that for your take-off gate, tut it is hard to say, what it will bring. Good luck and thanks for the kind words.

Thanks for the information Tony. I don't know alot about this year model as I deal mainly with the 67-72's. Hopefully I can find someone that has what I need that is willing to trade. Take care and keep up the good work taking care of the 456 guys.

r/

[LILRED66]

Originally Posted by Hart_Rod

Thanks for the information Tony. I don't know alot about this year model as I deal mainly with the 67-72's. Hopefully I can find someone that has what I need that is willing to trade. Take care and keep up the good work taking care of the 456 guys.

r/

A true "take-off" original fleetside tailgate is, not only rare, but valuable. Most of them have 40+ years of wear & tear on them, and they show it. Good luck with it. I am sure the right buyer will come along.

[dean jendro]

Tony,

I need the bracket that holds the radiator. It's the first piece attached to the frame coming in from the front of the truck on a 1964 Chev. Mine was munched years ago and welded and partially bolted in. I'm not sure if the original was a rivet or bolt in. Any help? Thanks a million.

Dean

[LILRED66]

Originally Posted by dean jendro

Tony,

I need the bracket that holds the radiator. It's the first piece attached to the frame coming in from the front of the truck on a 1964 Chev. Mine was munched years ago and welded and partially bolted in. I'm not sure if the original was a rivet or bolt in. Any help? Thanks a million.

Dean

Hey Dean. Welcome to the forums and thanks for the inquiry. I believe you are talking about the radiator cross member. They are factory-riveted originally. I have a few that are in very nice, unmolested condition. They are $54.00, including shipping, which I estimate to be $18.00.

I accept PayPal at: 4-5-6chevytrucks@sbcglobal.net

Please let me know if I can help you with this item or other good, used '60-'66 Chevy/GMC truck parts in the future and thanks for the opportunity.

[nbrfd007]

Tony-have you had a chance to look for windshield trim for my 62 burb? How about a set of hubcaps (ether clip or no clips)? Got to drive the Burb the other day, put a 500 Holley on it, runs great now. Got the clutch working, got brakes working also, but I still have to bleed them (double pumping).
Thanks,
Tim

[dean jendro]

Tony,
Is that $54.00 total or $54.00 plus $18.00?
Dean

[LILRED66]

Originally Posted by nbrfd007

Tony-have you had a chance to look for windshield trim for my 62 burb? How about a set of hubcaps (ether clip or no clips)? Got to drive the Burb the other day, put a 500 Holley on it, runs great now. Got the clutch working, got brakes working also, but I still have to bleed them (double pumping).
Thanks,
Tim

Hey Tim. Good to hear from you. It sounds like you are having a good time with the '62. I would like to see some photos, if you have any to share.

I haven't come across any good, used factory chrome windshield trim, lately. I have several sets of painted factory dog dish hub caps, that require clips, but they are all have a bowtie on them and they are for the 3/4 ton wheels. I have one decent GMC cap, but is it doesn't have the other three to go with it.

I have been keeping any eye out for these items, but not come across them. If I do, I will let you know. Good luck with the '62 and perhaps you can share some current photos of it. Thanks and enjoy the day.

[66coffin]

no i didn't get the tube yet when did you ship it? i do need the rubber filler hose that goes from the tank to the neck on the outside of the truck, clamps too if you got'em to 91709

[63 FLEETSIDE]

Do you have any carbs. I got a 63 in-line 6. I know you advertise for 64-66 but im assuming any in-line 6 carb will fit.

[LILRED66]

Originally Posted by 63 FLEETSIDE

Do you have any carbs. I got a 63 in-line 6. I know you advertise for 64-66 but im assuming any in-line 6 carb will fit.

Good morning and thanks for the inquiry. I have a good, used carb for the inline six. It is $90.00, including shipping. It appears to be in good, working order, but I haven't installed or run it, so it may or may not need a kit. I also have a factory NOS carb for an inline six. It has never been installed or run. It is in the original box. It is $225.00, including shipping.

I see many of the aftermarket truck parts suppliers sell a remanufactured unit, that range in price from $129.00 - $249.95 + core charge + tax + shipping. Please let me know if I can help.

[wrench_65]

Yeah i will take the fuel gauge. How do i go about sending you the payment?