Its Mine the World Famous 67 Dragtruck - Page 38 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kpeztruck · 06-11-2012, 04:48 PM

Just understand with the aftermarket steel doors, that they are going to require a lot of work to fit correctly as well. I was actually told when returning a driver's door, that had obviously been dropped on the window frame, "that is why they call it body work." Not exactly good customer service! The doors that I got from another supplier for my son's truck required a pie cut in the bottom of the shell, to lay the lower skin in far enough to align with the cab corner, and front fender. It stuck out too far below the body line, and the rest of the skin, and window frame were aligned. Pain in the butt. Paul

djracer · 06-12-2012, 02:13 AM

I had to add this one. I got to go by and peak at the bedsides today. I am stoked.

68Timber · 06-12-2012, 08:53 AM

Quote:

Originally Posted by djracer

I had to add this one. I got to go by and peak at the bedsides today. I am stoked.

That looks great, Kevin. Hope to see it when its done.

djracer · 06-12-2012, 11:22 PM

Quote:

Originally Posted by BRUISER

That looks great, Kevin. Hope to see it when its done.

I'm sure you will! I can't wait!

watahyahknow · 06-12-2012, 11:40 AM

yeah he put the link of that show on here a while back , cant find it anymore though , must be because im in europe and cant load spike

djracer · 06-12-2012, 11:24 PM

Quote:

Originally Posted by watahyahknow

yeah he put the link of that show on here a while back , cant find it anymore though , must be because im in europe and cant load spike

The link is in my signature. It just goes to my photo bucket account.

djracer · 06-12-2012, 11:30 PM

I struck a deal on some used doors today. I have got to have some roll up windows!

hotrod 80 · 06-13-2012, 12:48 PM

Quote:

Originally Posted by djracer

I struck a deal on some used doors today. I have got to have some roll up windows!

You aint kidding about roll up windows . It is hot outside , then add 3 layer nomex and a helmet plus the sun and any breeze you can get is good .

jgreene0717 · 06-13-2012, 08:39 AM

Paint looks great! Did Mike still have those doors?
Posted via Mobile Device

djracer · 06-13-2012, 10:24 AM

They are gone but i found some i think will work.
Posted via Mobile Device

**FRENCHBLUE72** · 06-15-2012, 04:20 PM

That gloss black is gonna be sweet..

djracer · 06-16-2012, 05:29 AM

Quote:

Originally Posted by FRENCHBLUE72

That gloss black is gonna be sweet..

Thanks I can't wait!

djracer · 06-30-2012, 12:44 AM

Weighed some doors. I have a nice Oem door I am gonna run on the rt side. I will probably buy a Tri Plus door for the left. I am thinking about making roll up and down lexan one piece side windows. I just don't think I will ever be happy with the quality of my glass doors.

Fiber Glass Door.....................19.5 Pounds
Oem Door..............................44 Pounds
Tri Plus Door..........................36.5 Pounds

Glass door has lexan windows and half hinges I made.

djracer · 07-15-2012, 09:47 AM

gutted the interior last week. I decided to run an Oem right door and a tri-plus lt dr. I am gonna try to make my own one piece side windows with roll up and down lexan!

watahyahknow · 07-15-2012, 04:01 PM

it prolly will scratch pretty bad if you make it roll up and down unless you dont use the rubbers at the bottom but some sort of felt

djracer · 07-15-2012, 10:09 PM

I will keep that in mind.

djracer · 07-10-2013, 11:38 PM

The truck is moving around in the paint shop! I will try to post a few pics! My son killed my laptop so I am doing the IPad thing right now!
Posted via Mobile Device

djracer · 07-10-2013, 11:51 PM

A couple of pics

Posted via Mobile Device

C20-67_N_MO · 07-11-2013, 12:23 AM

Looking good!

djracer · 07-11-2013, 08:25 AM

It looks like it maybe getting parol from paint shop prison!!!!!!!!!!!
Posted via Mobile Device

SweetandLong68 · 09-11-2013, 04:22 PM

Any Updates? Love the truck! I hope I can make my Roots supercharged 496 go like yours!

lata
CHRIS

djracer · 09-14-2013, 04:15 PM

Thanks Chris! They are working on it. I need to upload some pics.
Posted via Mobile Device

watahyahknow · 09-14-2013, 04:53 PM

yeah , its been a while since i seen pics of that truck

djracer · 09-14-2013, 06:44 PM

Few pics

Posted via Mobile Device

djracer · 09-14-2013, 06:47 PM

Few more pictures

Posted via Mobile Device

06-11-2012, 04:48 PM	#1
kpeztruck Registered User Join Date: Sep 2010 Location: Canton, GA Posts: 229	Re: Its Mine the World Famous 67 Dragtruck Just understand with the aftermarket steel doors, that they are going to require a lot of work to fit correctly as well. I was actually told when returning a driver's door, that had obviously been dropped on the window frame, "that is why they call it body work." Not exactly good customer service! The doors that I got from another supplier for my son's truck required a pie cut in the bottom of the shell, to lay the lower skin in far enough to align with the cab corner, and front fender. It stuck out too far below the body line, and the rest of the skin, and window frame were aligned. Pain in the butt. Paul

06-12-2012, 02:13 AM	#2
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck I had to add this one. I got to go by and peak at the bedsides today. I am stoked. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

06-12-2012, 11:40 AM	#5
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Its Mine the World Famous 67 Dragtruck yeah he put the link of that show on here a while back , cant find it anymore though , must be because im in europe and cant load spike __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

06-12-2012, 11:30 PM	#7
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck I struck a deal on some used doors today. I have got to have some roll up windows! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

06-13-2012, 08:39 AM	#9
jgreene0717 Jason Join Date: Sep 2008 Location: Wetumpka, AL Posts: 152	Re: Its Mine the World Famous 67 Dragtruck Paint looks great! Did Mike still have those doors? Posted via Mobile Device

06-13-2012, 10:24 AM	#10
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck They are gone but i found some i think will work. Posted via Mobile Device __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

06-15-2012, 04:20 PM	#11
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,591	Re: Its Mine the World Famous 67 Dragtruck That gloss black is gonna be sweet.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

06-30-2012, 12:44 AM	#13
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck Weighed some doors. I have a nice Oem door I am gonna run on the rt side. I will probably buy a Tri Plus door for the left. I am thinking about making roll up and down lexan one piece side windows. I just don't think I will ever be happy with the quality of my glass doors. Fiber Glass Door.....................19.5 Pounds Oem Door..............................44 Pounds Tri Plus Door..........................36.5 Pounds Glass door has lexan windows and half hinges I made. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

07-15-2012, 09:47 AM	#14
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck gutted the interior last week. I decided to run an Oem right door and a tri-plus lt dr. I am gonna try to make my own one piece side windows with roll up and down lexan! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

07-15-2012, 04:01 PM	#15
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Its Mine the World Famous 67 Dragtruck it prolly will scratch pretty bad if you make it roll up and down unless you dont use the rubbers at the bottom but some sort of felt __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

07-15-2012, 10:09 PM	#16
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck I will keep that in mind. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

07-10-2013, 11:38 PM	#17
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck The truck is moving around in the paint shop! I will try to post a few pics! My son killed my laptop so I am doing the IPad thing right now! Posted via Mobile Device __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

07-10-2013, 11:51 PM	#18
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck A couple of pics Posted via Mobile Device __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

07-11-2013, 12:23 AM	#19
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: Its Mine the World Famous 67 Dragtruck Looking good! __________________ Coming Soon: Project 1970 Country Truck

07-11-2013, 08:25 AM	#20
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck It looks like it maybe getting parol from paint shop prison!!!!!!!!!!! Posted via Mobile Device __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!



Register or Log In To remove these advertisements.

09-11-2013, 04:22 PM	#21
SweetandLong68 Your UncleBen Join Date: Dec 2002 Location: Indian Trail, NC Posts: 590	Re: Its Mine the World Famous 67 Dragtruck Any Updates? Love the truck! I hope I can make my Roots supercharged 496 go like yours! lata CHRIS __________________ 68 C10 shortbed -- Street/Strip

09-14-2013, 04:15 PM	#22
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck Thanks Chris! They are working on it. I need to upload some pics. Posted via Mobile Device __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-14-2013, 04:53 PM	#23
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Its Mine the World Famous 67 Dragtruck yeah , its been a while since i seen pics of that truck __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

09-14-2013, 06:44 PM	#24
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck Few pics Posted via Mobile Device __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-14-2013, 06:47 PM	#25
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck Few more pictures Posted via Mobile Device __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

Register or Log In To remove these advertisements.