![]() |
![]() |
#951 |
Registered User
Join Date: Jun 2011
Location: Spokane, WA
Posts: 2,367
|
Re: My '67 Fleetside C10 renew
Pretty decent weekend here boys!
Got home from a road trip (work - ugh!) and my new bell housing was here. Stuffed that with the Boy's 11" Mcleod and 163t flywheel and FINALLY drilled the frame and bolted in that cross member I made a year ago. Got the exhaust within inches of done too. I came up just short on the bends, so I ordered another 180 degree bend but in stainless. I'll lop that in half to complete the exhaust saga with some nice, square-cut stainless tips right where they oughtta be! U-bolts are still way long in the photo. Once I'm happy with blocks I'll cut them down to size. I dropped the cab back on in prep for my hydraulic clutch setup. I ordered a Willwood master to mount on the firewall and will make some mods at the clutch pedal lever for a push rod. Going with the Novak slave kit. I'll then be hanging the doors back on to make sure they're fitting up good with the new hinges and such. I'm set up for hydraboost and will scratch out those lines as well as the working lines to the brakes. Need to research all them holes in the firewall and close up the ones I don't need. Gotta get all them bed parts straight in my head here soon too. Helped Knuckles do a Q-Jet rebuild on his '75 too. He HATES them but I'm bringing him around. It runs pretty awesome and so does the Crummy. Q-Jet = ![]() Got most of that done yesterday, then Boy and I spend most of today DEEP cleaning the shop. Cleared off some shelves and cabinets, pretty much filled the big-boy trash can and put some square feet back into that place!
__________________
'77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776 ![]() |
![]() |
![]() |
![]() |
#952 |
Registered User
Join Date: Apr 2011
Location: .
Posts: 3,104
|
Re: My '67 Fleetside C10 renew
Thats starting to look like a truck again. A real clean one at that.
Here is a link to some firewall holes. https://www.google.com/search?q=1967...3%3B1024%3B768 |
![]() |
![]() |
![]() |
#953 |
Senior Member
![]() Join Date: Mar 2012
Location: Kansas City, MO
Posts: 2,011
|
Re: My '67 Fleetside C10 renew
Looks great, John. Isn't it amazing how much time you can spend on suspension, exhaust and other low visibility items? Then you hang some sheet metal and BOOM! the project takes on a completely different vibe. It's like... hey!! I've been been toiling away all along, but for some reason the cake ain't done till the icing goes on. You're making great progress despite having to deal with that pesky job thing.
__________________
Victor 57 Chevy Wagon - California Dreamin'"Mecum'd" 9/2022 Dallas, TX Crusty Rusty Leaky Squeaky 67 Consigned 4/2019 Dresden, Germany Maybelline - my '57 Ford 2dr Sedan "Mecum'd" 3/2016 Location unknown Silver Streaker "Mecum'd" 4/2013 Somewhere in Texas |
![]() |
![]() |
![]() |
#954 |
Still Learning
Join Date: Jul 2009
Location: Central Oklahoma
Posts: 10,108
|
Re: My '67 Fleetside C10 renew
Wow! you have made some killer progress! Your truck looks great! Keep up the good work.
|
![]() |
![]() |
![]() |
#955 |
Registered User
Join Date: Dec 2012
Location: Manitoba
Posts: 644
|
Re: My '67 Fleetside C10 renew
Nice stance on that shorty.. good stuff
|
![]() |
![]() |
![]() |
#956 |
Registered User
Join Date: Mar 2011
Location: Kansas City, Missouri
Posts: 3,541
|
Re: My '67 Fleetside C10 renew
Looks great John! You're doing a solid job.
__________________
Scott |
![]() |
![]() |
![]() |
#957 | |
Registered User
![]() Join Date: Jun 2014
Location: Shingle Springs, CA
Posts: 869
|
Re: My '67 Fleetside C10 renew
Quote:
Man its really coming along. Keep up the good work. I am looking to do a hydro clutch swap soon to. Which Wilwood master did you order? Here is the bracket I am looking at running with a OEM slavecylinder. http://www.summitracing.com/parts/add-716287 Page 19 shows a picture. http://www.advanceadapters.com/pdf/tlc_ebook.pdf |
|
![]() |
![]() |
![]() |
#958 | ||||
Registered User
Join Date: Jun 2011
Location: Spokane, WA
Posts: 2,367
|
Re: My '67 Fleetside C10 renew
Quote:
Quote:
![]() Quote:
Thanks Molberg! It looks good from any angle, puts a smile right across my face. When we gonna hear yours fire up? Thanks Scott, you too! Rust Slayer ![]() Quote:
__________________
'77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776 ![]() |
||||
![]() |
![]() |
![]() |
#959 |
Registered User
Join Date: May 2009
Location: longview,wa
Posts: 1,094
|
Re: My '67 Fleetside C10 renew
Looking good dude!!!
__________________
1972 GMC (PROJECT LONG OVERDUE) ![]() 1998 SWB 4WD |
![]() |
![]() |
![]() |
#960 |
Registered User
Join Date: Jun 2011
Location: Spokane, WA
Posts: 2,367
|
Re: My '67 Fleetside C10 renew
Thanks man, you sure set the bar high! Puttin miles on the stepper?
__________________
'77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776 ![]() |
![]() |
![]() |
![]() |
#961 |
Registered User
Join Date: Jun 2011
Location: Spokane, WA
Posts: 2,367
|
Re: My '67 Fleetside C10 renew
Off topic but the Purdy truck is a POS. I'd noticed a harsh noise on the 1-2 shift, brought it to the dealer and took the service advisor for a ride. He heard it too, so he took their trans specialist for a ride. He heard it too and claimed it was normal and the sound was coming from a solenoid. I'm no transmission specialist or ASE anything but I am certified as a fluid power specialist and have about 20 years experience in automated fluid power systems. Been around a few solenoid valves. I felt he was trying to ram sunshine up my arse. Long story short, POS made a huge WHACK this afternoon and she's stuck in like 4th or 5th gear. Still under bumper to bumper so the tow truck is headed over in the morning and I'm looking at a service loaner. They said the transmission dude is pretty backed up so it might be a "while" before they get to mine. That buyer's remorse is kickin' in hard now boys!!!
__________________
'77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776 ![]() |
![]() |
![]() |
![]() |
#962 |
Registered User
Join Date: Jun 2011
Location: Spokane, WA
Posts: 2,367
|
Re: My '67 Fleetside C10 renew
Ok, back on topic...
I had come up just short on the mandrel bends, so I ordered up another u-bangey but in stainless. I re-made one of my hangers to get it just right and finished the exhaust out. It's exactly what I wanted it to be - stoked about this part of the build. I still have to pull it apart, weld it all out and paint it (except the stainless tips ![]() I bought a slip-yoke for the trans, measured and ordered up a 4" DOM x 1310 driveline. Weld yokes had to be ordered but should be done any day now. Knuckles scored a job at the engine/machine shop we've been using ![]() ![]() Did a full rebuild / restore on my chainsaw too cuz we mushed it at the end of last year. It's bad azz and I'll get a vid here soon on the Crummy page.
__________________
'77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776 ![]() |
![]() |
![]() |
![]() |
#963 | |
Senior Member
![]() Join Date: Mar 2012
Location: Kansas City, MO
Posts: 2,011
|
Re: My '67 Fleetside C10 renew
Quote:
Exhaust on the '67 looks great! I like how you routed it out back. Seeing yours sitting pretty made me want to go out to the garage and take the cover off CRLS and give it a hug.
__________________
Victor 57 Chevy Wagon - California Dreamin'"Mecum'd" 9/2022 Dallas, TX Crusty Rusty Leaky Squeaky 67 Consigned 4/2019 Dresden, Germany Maybelline - my '57 Ford 2dr Sedan "Mecum'd" 3/2016 Location unknown Silver Streaker "Mecum'd" 4/2013 Somewhere in Texas |
|
![]() |
![]() |
![]() |
#964 |
Registered User
Join Date: Jun 2011
Location: Spokane, WA
Posts: 2,367
|
Re: My '67 Fleetside C10 renew
The Purdy truck saga continues. Turns out that it was in "limp mode", which only allows it to go fwd in some middle gear. By the time it got towed to the dealer it had reset itself. They say it had logged a traction control error and a TCM error. No further details. They couldn't duplicate the problem, which I guess equals fixed. BS! The did replace the rear seal in the t-case because I pointed out that it was leaking. They ignored the wet power steering hose I pointed out. Guess they need to burst before they're bad. GM Certified AND a GM check-up after I bought it. Hmm... I took the second service advisor for a spin and he too heard the crunchy noise between 1 and 2. Another appointment scheduled for Tuesday. I had a '14 for a loaner while they had mine for a WEEK and it sure doesn't make any racket like that. UGH!
On a better note, driveline is done! 4" DOM for an appropriate critical speed ![]() ![]() Clutch going in the Crummy this weekend.
__________________
'77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776 ![]() |
![]() |
![]() |
![]() |
#965 |
Registered User
Join Date: Mar 2011
Location: Kansas City, Missouri
Posts: 3,541
|
Re: My '67 Fleetside C10 renew
Sounds like they are professionally kindly trying to keep you from getting a new transmission. Your truck is coming along nice John.
__________________
Scott |
![]() |
![]() |
![]() |
#966 |
Registered User
![]() Join Date: Jun 2014
Location: Shingle Springs, CA
Posts: 869
|
Re: My '67 Fleetside C10 renew
How is the clutch coming along?
|
![]() |
![]() |
![]() |
#967 |
Registered User
Join Date: Jun 2011
Location: Spokane, WA
Posts: 2,367
|
Re: My '67 Fleetside C10 renew
I've had a little back-n-forth with Captainfab on PM. I think my plan is to use the parts from his kit on the inside of the cab. Sounds like he can supply just the plate that lays on the firewall that he uses to fab up his adapter bracket. That'll help me locate the clutch master. It's coming...
__________________
'77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776 ![]() |
![]() |
![]() |
![]() |
#968 |
laying low
![]() Join Date: Mar 2001
Location: Searcy, Ark. USA
Posts: 13,227
|
Re: My '67 Fleetside C10 renew
I've spent most of the day going through this thread and a couple others. Going with a dual quad 327 and 4 speed is cool cool cool. The rolling stock choice and all. Just plain *****in. With everybody on the LS fad these days it is great to see this old school setup going in a new build. John I admire your determination. It seemed at times this rebuild would be pushed aside indefinitely while life got in the way. It's cool your son is also a gear head. He's learning some hard lessons. One of my dad's sayings I heard oh so many times was "the bought lessons you won't forget". He was right. If it costs you some pain or cash you tend to remember it better. I hope "knuckles" does take his mechanical enthusiasm to school and put it to good use. You have some serious support group too. I particularly enjoyed the 'elco' isms.
![]()
__________________
Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross |
![]() |
![]() |
![]() |
#969 |
Registered User
![]() Join Date: Jun 2014
Location: Shingle Springs, CA
Posts: 869
|
Re: My '67 Fleetside C10 renew
Any updates buddy?
|
![]() |
![]() |
![]() |
#970 |
Registered User
Join Date: Apr 2003
Location: Indep, MO
Posts: 5,893
|
Re: My '67 Fleetside C10 renew
Some good work goin' on! Glad to see someone's getting something done around here. Good to see Knuckles get out of the burger-flippin' mode. Love the new driveshaft.
__________________
Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low! |
![]() |
![]() |
![]() |
#971 |
Registered User
Join Date: Apr 2003
Location: Indep, MO
Posts: 5,893
|
Re: My '67 Fleetside C10 renew
Hey Boog, come on up to KC the weekend after Labor day and Get some Elco in person at the Nationals!
__________________
Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low! |
![]() |
![]() |
![]() |
#972 |
laying low
![]() Join Date: Mar 2001
Location: Searcy, Ark. USA
Posts: 13,227
|
Re: My '67 Fleetside C10 renew
Well thanks. I know you guys will be having fun.
__________________
Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross |
![]() |
![]() |
![]() |
#973 |
Registered User
![]() Join Date: Jun 2014
Location: Shingle Springs, CA
Posts: 869
|
Re: My '67 Fleetside C10 renew
How is the clutch setup coming along?
|
![]() |
![]() |
![]() |
#974 |
Registered User
Join Date: Jun 2011
Location: Spokane, WA
Posts: 2,367
|
Re: My '67 Fleetside C10 renew
CaptainFab has my parts ready. Picking them up this week. Will report.
Posted via Mobile Device |
![]() |
![]() |
![]() |
#975 |
Registered User
![]() Join Date: Jun 2014
Location: Shingle Springs, CA
Posts: 869
|
![]() |
![]() |
![]() |
![]() |
Bookmarks |
Tags |
295/50-15, 327, butternut yellow, dog dish, muncie m20 |
|
|