What did you do to your Blazer/Jimmy today? - Page 39 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ptjsk · 01-31-2020, 02:14 AM

Quote:

Originally Posted by 3757chevy

Looks good .

Amazing what wheels and tires can do!

Pat

BIG BLOCK JIMMY · 02-01-2020, 06:05 PM

Removed old gas tank as step one for installing the EFI kit and new tank. I also figured out why the Jimmy rained gas when I filled it up! I guess the PO thought JB Weld was a good idea?
Photo of my dog, just because he's mad that I have ignored him today.

**jaros44sr** · 02-02-2020, 09:51 AM

always amazes me what the PO's do, you found a new one

mister.freeze · 02-03-2020, 12:38 PM

Quote:

Originally Posted by 72 Jimmy Power

Took it out of the garage.

Well I drove mine to work. Again.

**3757chevy** · 02-05-2020, 08:37 PM

I drove mine to work Today . It was melting and refreezing . Made for some crazy ground effects. (sorry for poor picture quality)

CamTra · 02-22-2020, 02:39 PM

Bought mine!! Looking for a rear seat now.

**DeadheadNM** · 02-22-2020, 09:46 PM

Welcome to the K5 club!

**SoCoC10** · 02-25-2020, 10:13 AM

First test drive between snow squalls. Finished a few upgrades and repairs including installing a rebuilt TH350.

**SoCoC10** · 02-26-2020, 11:08 PM

Bath time. “0000” steel wool and CLR followed by a coat of wax.

**DeadheadNM** · 02-26-2020, 11:17 PM

Quote:

Originally Posted by SoCoC10

Bath time. “0000” steel wool and CLR followed by a coat of wax.

Pics please...

litebulblsc · 03-07-2020, 12:53 PM

Replaced a busted headlight retainer. The screws from LMC are incorrect, so reused the originals. Also replacing the gauge cluster. Going to order a connector so it won't be done today

**mortoyz** · 03-07-2020, 11:38 PM

Put the new LT Motor/8l90 transmission in the Jimmy today. Not sure why the pictures are upside down and sideways? Name: Jimmy1.jpg
Views: 683
Size: 65.4 KB

Name: Jimmy1.jpg
Views: 683
Size: 65.4 KB

Name: Jimmy.jpg
Views: 678
Size: 47.3 KB

**jaros44sr** · 03-08-2020, 01:20 PM

Quote:

Originally Posted by litebulblsc

Replaced a busted headlight retainer. The screws from LMC are incorrect, so reused the originals. Also replacing the gauge cluster. Going to order a connector so it won't be done today

I agree with the screws, no where else are they used, the pointed end helps to align. I alays keep extras around

for the life of me, can't figure out your backgroud, is it a truck part?

Ryanz · 03-08-2020, 02:25 PM

Quote:

Originally Posted by DeadheadNM

...

Did you find this a difficult project? The install of the tach and vac guages?

I'd like to do the same.

**DeadheadNM** · 03-08-2020, 04:33 PM

Quote:

Originally Posted by Ryanz

Did you find this a difficult project? The install of the tach and vac guages?

I'd like to do the same.

Cluster swap/upgrade isn't too hard. It's a half day project. If your K5 wasn't equipped with a tach originally you need to plan where to route the tach harness - I've drilled the 0.75" firewall hole in the correct spot, it's easy and there are a few threads dedicated to this. Use a line wrench to loosen the oil pressure line if so equipped in order to avoid stripping the brass. Good time to swap steering column too if that's on the menu. If you need a tach/vac cluster check with Tbone Tom as he provides a good service.

**PDXk5** · 03-08-2020, 07:11 PM

I decided to tackle refurbishing a spare hatch I have. I separated the two sides and am starting to remove hardware that refused to come off. (One of the latches had the welded nuts break from the spot welds and I couldn’t get it off until the hatch interior was exposed.)

I can’t get the struts to come loose. Been spraying it with PB Blaster. Started drilling out one sides screws (those things are tough! Still haven’t made it through them yet).

Sorta following this thread but with more miss steps...
http://67-72chevytrucks.com/vboard/s...d.php?t=403730

Anyone know what these are? They were only on one side and I haven’t seen them on other hatches with the latches removed.

litebulblsc · 03-09-2020, 04:52 AM

Quote:

Originally Posted by jaros44sr

I agree with the screws, no where else are they used, the pointed end helps to align. I alays keep extras around

for the life of me, can't figure out your backgroud, is it a truck part?

Tire, Super Swamper Bogger

Jeff1971 · 03-09-2020, 11:13 PM

The circle is around what looks like an anti rattle bumper. Mine had foam blocks stuffed inside the lower area where the latch rods are. That looks like it could be a stock piece.

**1rippen6** · 03-10-2020, 09:43 PM

Quote:

Originally Posted by PDXk5

I decided to tackle refurbishing a spare hatch I have. I separated the two sides and am starting to remove hardware that refused to come off. (One of the latches had the welded nuts break from the spot welds and I couldn’t get it off until the hatch interior was exposed.)

I can’t get the struts to come loose. Been spraying it with PB Blaster. Started drilling out one sides screws (those things are tough! Still haven’t made it through them yet).

Sorta following this thread but with more miss steps...
http://67-72chevytrucks.com/vboard/s...d.php?t=403730

Anyone know what these are? They were only on one side and I haven’t seen them on other hatches with the latches removed.

Quote:

Originally Posted by Jeff1971

The circle is around what looks like an anti rattle bumper. Mine had foam blocks stuffed inside the lower area where the latch rods are. That looks like it could be a stock piece.

Yes, I have a few rods with the same boot on them. I wouldn't drill the strut bolts out if you have access to a welder. Weld a nut to the head and then try to turn it out. The corner window seal bolts are the same, I have more if you need them. How or what did you use to split the hatch in half.

**PDXk5** · 03-12-2020, 01:13 AM

Quote:

Originally Posted by 1rippen6

Yes, I have a few rods with the same boot on them. I wouldn't drill the strut bolts out if you have access to a welder. Weld a nut to the head and then try to turn it out. The corner window seal bolts are the same, I have more if you need them. How or what did you use to split the hatch in half.

I used a thin putty knife and hammer to tap the putty knife into the seam between the two halves. I went slow and it worked pretty well.

That’s a great idea for the strut bolts. I don’t have access to a welder but maybe I can have a local guy that does welding do it for me. I’ll make some calls.

litebulblsc · 03-25-2020, 07:25 PM

Second day of stay home order, I got my new cluster wired up and installed. Still have to install the huge oil pressure sensor, which I am not looking forward to. But other then that, everything is hooked up.

CamTra · 03-26-2020, 04:46 AM

Had the wife and daughter sew up a makeshift seat cover so we can ride and enjoy as I wait for my ordered seat cover to come and finish getting restored.

72 Jimmy Power · 03-26-2020, 11:33 AM

Hi, Changing rear end fluid Today. Then this weekend going to start undercoating the entire frame. Probably going to take awhile.

**SoCoC10** · 04-01-2020, 09:08 PM

Cleaning and painting/dyeing the Ochre K5s Parchment interior pieces.

**SoCoC10** · 04-02-2020, 06:29 PM

Trim clean polish and paint.

02-01-2020, 06:05 PM	#952
BIG BLOCK JIMMY Registered User Join Date: Jul 2018 Location: FL and WV Posts: 135	Re: What did you do to your Blazer/Jimmy today? Removed old gas tank as step one for installing the EFI kit and new tank. I also figured out why the Jimmy rained gas when I filled it up! I guess the PO thought JB Weld was a good idea? Photo of my dog, just because he's mad that I have ignored him today. Attached Images __________________ 72' JIMMY 454 Last edited by BIG BLOCK JIMMY; 02-01-2020 at 06:08 PM. Reason: Photos didn't show up

02-02-2020, 09:51 AM	#953
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,704	Re: What did you do to your Blazer/Jimmy today? always amazes me what the PO's do, you found a new one __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

02-05-2020, 08:37 PM	#955
3757chevy Senior Member Join Date: Mar 2016 Location: Near Canon City ,Colorado Posts: 4,026	Re: What did you do to your Blazer/Jimmy today? I drove mine to work Today . It was melting and refreezing . Made for some crazy ground effects. (sorry for poor picture quality) Attached Images __________________ '35 1/2 ton Pickup (bought 2020) '68 C10 Suburban (bought 2021) '72 K5 Blazer (bought 2013) '67 Stepside (bought 1997-sold 2021) '96 Bronco Eddie Bauer (inherited 2010) My 1st day here-'67 C10(sold)and '72 K5 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=702056 "Another Blue Chevy"(1935) http://67-72chevytrucks.com/vboard/s...d.php?t=799203 '68 Burb...https://67-72chevytrucks.com/vboard/...d.php?t=822994 MIKE

02-22-2020, 02:39 PM	#956
CamTra Registered User Join Date: Aug 2019 Location: Livingston, La Posts: 56	Re: What did you do to your Blazer/Jimmy today? Bought mine!! Looking for a rear seat now. Attached Images

02-22-2020, 09:46 PM	#957
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,424	Re: What did you do to your Blazer/Jimmy today? Welcome to the K5 club! __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

02-25-2020, 10:13 AM	#958
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,303	Re: What did you do to your Blazer/Jimmy today? First test drive between snow squalls. Finished a few upgrades and repairs including installing a rebuilt TH350. Attached Images __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count Last edited by SoCoC10; 02-25-2020 at 10:37 AM.

02-26-2020, 11:08 PM	#959
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,303	Re: What did you do to your Blazer/Jimmy today? Bath time. “0000” steel wool and CLR followed by a coat of wax. Attached Images __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count Last edited by SoCoC10; 02-26-2020 at 11:27 PM.

03-07-2020, 12:53 PM	#961
litebulblsc Registered User Join Date: Aug 2006 Location: LaSalle Mi Posts: 520	Re: What did you do to your Blazer/Jimmy today? Replaced a busted headlight retainer. The screws from LMC are incorrect, so reused the originals. Also replacing the gauge cluster. Going to order a connector so it won't be done today Attached Images

03-07-2020, 11:38 PM	#962
mortoyz Active Member Join Date: Nov 2008 Location: Maroa, IL Posts: 123	Re: What did you do to your Blazer/Jimmy today? Put the new LT Motor/8l90 transmission in the Jimmy today. Not sure why the pictures are upside down and sideways?

03-08-2020, 07:11 PM	#966
PDXk5 Senior Member Join Date: Aug 2012 Location: Portland, OR Posts: 935	Re: What did you do to your Blazer/Jimmy today? I decided to tackle refurbishing a spare hatch I have. I separated the two sides and am starting to remove hardware that refused to come off. (One of the latches had the welded nuts break from the spot welds and I couldn’t get it off until the hatch interior was exposed.) I can’t get the struts to come loose. Been spraying it with PB Blaster. Started drilling out one sides screws (those things are tough! Still haven’t made it through them yet). Sorta following this thread but with more miss steps... http://67-72chevytrucks.com/vboard/s...d.php?t=403730 Anyone know what these are? They were only on one side and I haven’t seen them on other hatches with the latches removed. Attached Images

03-09-2020, 11:13 PM	#968
Jeff1971 Registered User Join Date: Dec 2018 Location: Weiser Idaho Posts: 68	Re: What did you do to your Blazer/Jimmy today? The circle is around what looks like an anti rattle bumper. Mine had foam blocks stuffed inside the lower area where the latch rods are. That looks like it could be a stock piece.

03-25-2020, 07:25 PM	#971
litebulblsc Registered User Join Date: Aug 2006 Location: LaSalle Mi Posts: 520	Re: What did you do to your Blazer/Jimmy today? Second day of stay home order, I got my new cluster wired up and installed. Still have to install the huge oil pressure sensor, which I am not looking forward to. But other then that, everything is hooked up. Attached Images

03-26-2020, 04:46 AM	#972
CamTra Registered User Join Date: Aug 2019 Location: Livingston, La Posts: 56	Re: What did you do to your Blazer/Jimmy today? Had the wife and daughter sew up a makeshift seat cover so we can ride and enjoy as I wait for my ordered seat cover to come and finish getting restored. Attached Images

03-26-2020, 11:33 AM	#973
72 Jimmy Power Registered User Join Date: Mar 2019 Location: South San Francisco, California Posts: 468	Re: What did you do to your Blazer/Jimmy today? Hi, Changing rear end fluid Today. Then this weekend going to start undercoating the entire frame. Probably going to take awhile.

04-01-2020, 09:08 PM	#974
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,303	Re: What did you do to your Blazer/Jimmy today? Cleaning and painting/dyeing the Ochre K5s Parchment interior pieces. Attached Images __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count Last edited by SoCoC10; 04-02-2020 at 06:29 PM.



Register or Log In To remove these advertisements.

04-02-2020, 06:29 PM	#975
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,303	Re: What did you do to your Blazer/Jimmy today? Trim clean polish and paint. Attached Images __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count

Register or Log In To remove these advertisements.