Project Vitamin C-10 - Page 39 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Alan's Classic · 05-01-2009, 10:05 PM

Quote:

Originally Posted by Strodder

I forgot to say. LOOKEN GOOD Allan.

Thanks Dennis

Quote:

Originally Posted by 70 Suburban

you are a stronger man than i there is no way I could wait

It's tough, I might cave in.

Quote:

Originally Posted by ruffrida2005

these are the other headers. http://store.summitracing.com/partde...5&autoview=sku

Thanks for your help

Quote:

Originally Posted by protrash64

Hey Alan, looking good!!! About the headers, as another option for you, I used Summit G9014's. Smog header for 88-98, shorty. I had to weld up the O2 sensor port and they were tight on the drivers side, but I used the front position for the engine. In the back position you would have a little more clearance, I imagine. They turned out to be Pacesetter's.

Thanks for the info, but if I had too weld on them I couldn't get cermanic coated.

Quote:

Originally Posted by shortbed70

What gun did you use to spray the roof? I am thinking of getting those kits for my gravity feed that will spray upside down.

It's a Matco gun I think it's a 1.4. The tool guy was going out of business and got 2 of them for $100. It's not an Iwata or Sata but serves me well. The PPS system is awesome, but figure $.80-1.00 per liner. Clean up is awesome and no leaks and can spray upside down like you said.

Quote:

Originally Posted by jgh64pkup

lookin good before long youll be driving it
i still have another year before i can drive mine
oh and wow 39 pages this is a long thread

Thanks man, I wonder how many pages I'll have when I finally put a tag on it? I could make it into a contest.

Guess when it will be done. Money is a big factor.

Since I don't have any cars to work on now at work, I figured why not get something done on the old truck. Got some small parts painted black. Someday I will learn how too paint all of the edges. It drives me nuts. I walk around and make sure I got everything and hit the bake cycle. I go to get them out of the booth and there is a gray edge.

Sealed and painted the inside of the doors.

joe231 · 05-01-2009, 10:57 PM

sweet!!!

jgh64pkup · 05-01-2009, 11:47 PM

looks good i should have mine painted pretty soon (minus the bed)
are you planning on any stripes or two tone or just solid orange

ruffrida2005 · 05-02-2009, 12:56 AM

I like looking at your thread, because your always doing something with it even if it doesn't matter right now. Mines at a stand still, no more money right now and I have to go back to work Monday so my trucks at my parents. 4 hours away so work wont get done much.

Alan's Classic · 05-02-2009, 01:18 AM

Quote:

Originally Posted by joe231

sweet!!!

Quote:

Originally Posted by jgh64pkup

looks good i should have mine painted pretty soon (minus the bed)
are you planning on any stripes or two tone or just solid orange

The roof and the area between the body side trim will be the same color as the frame and guage pods

Quote:

Originally Posted by ruffrida2005

I like looking at your thread, because your always doing something with it even if it doesn't matter right now. Mines at a stand still, no more money right now and I have to go back to work Monday so my trucks at my parents. 4 hours away so work wont get done much.

Thanks man, I'm out of cash for a while, but there is always something to do that doesn't cost. That sucks your truck isn't at your place.

I had to go out to the shop and do something. I prefitted the serpentine setup. I think I have the belt on right. The only issues I see right now are: I need a new water neck, the altenator bracket is very close to valve cover, but it does clear. Also the bracket at the #1 header port. Nothing major. I also had to put some bling on it to make me feel like I'm doing something.

I'm going to do orange highlights in the valve covers

I couldn't help myself I had to do it. The speedo was in the house. I was too lazy to go get it plus it was raining.

Also put the eyeball vents in for more bling.

Strodder · 05-02-2009, 10:06 AM

Coming out really nice Allan. I like the color combo. I hope that's a reverse flow water pump your using. Just looking out for you.

Alan's Classic · 05-02-2009, 11:57 AM

Quote:

Originally Posted by Strodder

Coming out really nice Allan. I like the color combo. I hope that's a reverse flow water pump your using. Just looking out for you.

Thanks for lookin' out for me Dennis. You never know when I might do something stupid. It is a reverse flow pump. I have too take it off now and paint it. Just mocked everything up. Again thanks for the look out.

jgh64pkup · 05-02-2009, 12:33 PM

i like the valve covers where did you get them

daverod · 05-02-2009, 01:16 PM

TimE · 05-02-2009, 02:02 PM

Nice!!

joe231 · 05-02-2009, 06:23 PM

that dash is so SICK!!!

Alan's Classic · 05-02-2009, 06:47 PM

Quote:

Originally Posted by jgh64pkup

i like the valve covers where did you get them

I can't remember where I got them. They are 8-9 years old. I still have the box, Billet Specialties PN 95226, but they don't list them any more. Here is a LINK to what they offer now.

Quote:

Originally Posted by daverod

Quote:

Originally Posted by TimE

Nice!!

Quote:

Originally Posted by joe231

that dash is so SICK!!!

Thanks X3 I put the speedo in and it even looks better.

70 Suburban · 05-02-2009, 06:49 PM

i knew you couldnt hold out

jgh64pkup · 05-02-2009, 08:11 PM

well lets see some pics

Alan's Classic · 05-02-2009, 08:45 PM

Quote:

Originally Posted by 70 Suburban

i knew you couldnt hold out

Quote:

Originally Posted by jgh64pkup

well lets see some pics

jason65 · 05-02-2009, 09:16 PM

Nice, nice, nice. Awsome work Alan.

joe231 · 05-02-2009, 11:20 PM

Strodder · 05-03-2009, 10:54 AM

AWESOME!!

Your teasing us. Hurry up and finish it.
I know you want it done more than we do. Time is the factor, HUH?.

jgh64pkup · 05-03-2009, 12:23 PM

lookin good

ol Curt · 05-03-2009, 01:32 PM

Hey Alan,

On post 72 of your build page I see the holes for all the after market parts don't match up. I have that same dilemma and can solve that, but my front cab brace doesn't come out far enough to meet the outer or inner rocker. It is probably 1/2" short and is all the way out. Think i should try to go back and add on to it on the inboard side or bush over the bolts in the gap?

I'll post some pics on my post tonight.

Bob

**Palf70Step** · 05-03-2009, 05:38 PM

Well you were busy the last couple days, while I was out goofing off at a truck show. It looks GREAT Alan!

Alan's Classic · 05-03-2009, 06:53 PM

Quote:

Originally Posted by jason65

Nice, nice, nice. Awsome work Alan.

Quote:

Originally Posted by joe231

Quote:

Originally Posted by Strodder

AWESOME!! Your teasing us. Hurry up and finish it.
I know you want it done more than we do. Time is the factor, HUH?.

There is more teasing to come.

Quote:

Originally Posted by jgh64pkup

lookin good

Quote:

Originally Posted by ol Curt

Hey Alan,

On post 72 of your build page I see the holes for all the after market parts don't match up. I have that same dilemma and can solve that, but my front cab brace doesn't come out far enough to meet the outer or inner rocker. It is probably 1/2" short and is all the way out. Think i should try to go back and add on to it on the inboard side or bush over the bolts in the gap?

I'll post some pics on my post tonight.

Bob

Bob, I looked at post 72 and it isn't the right post. I think I know what you are talking about, but i will wait for your pix too comment.

Quote:

Originally Posted by Palf70Step

Well you were busy the last couple days, while I was out goofing off at a truck show. It looks GREAT Alan!

Thanks Bill, I get a burst of energy every now and then.

Old School Kid · 05-03-2009, 08:15 PM

I have been out of town and touch for a few weeks.... Just got caught up... It looks great Alan! Maybe I'll bump into you on the 16th?

MacAttack · 05-04-2009, 11:16 AM

NASA called and they said you've got to take out a permit to have something that bright here on Earth.

4dranch · 05-04-2009, 11:55 AM

Very classy Alan,,,very classy.

05-01-2009, 10:57 PM	#952
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My 1965 build thread sweet!!! __________________ *CHEVY ONLY*

05-01-2009, 11:47 PM	#953
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: My 1965 build thread looks good i should have mine painted pretty soon (minus the bed) are you planning on any stripes or two tone or just solid orange __________________ Gage 1967 C10 Shortbed Stepside

05-02-2009, 12:56 AM	#954
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: My 1965 build thread I like looking at your thread, because your always doing something with it even if it doesn't matter right now. Mines at a stand still, no more money right now and I have to go back to work Monday so my trucks at my parents. 4 hours away so work wont get done much. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

05-02-2009, 10:06 AM	#956
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: My 1965 build thread Coming out really nice Allan. I like the color combo. I hope that's a reverse flow water pump your using. Just looking out for you. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

05-02-2009, 12:33 PM	#958
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: My 1965 build thread i like the valve covers where did you get them __________________ Gage 1967 C10 Shortbed Stepside

05-02-2009, 01:16 PM	#959
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: My 1965 build thread

05-02-2009, 02:02 PM	#960
TimE Hey Y'all!! Join Date: Dec 2007 Location: Bay Minette, Alabama Posts: 1,755	Re: My 1965 build thread Nice!! __________________ Just hopin' I live long enough to finish something!!!

05-02-2009, 06:23 PM	#961
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My 1965 build thread that dash is so SICK!!! __________________ *CHEVY ONLY*

05-02-2009, 06:49 PM	#963
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: My 1965 build thread i knew you couldnt hold out

05-02-2009, 08:11 PM	#964
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: My 1965 build thread well lets see some pics __________________ Gage 1967 C10 Shortbed Stepside

05-02-2009, 09:16 PM	#966
jason65 Registerd User Join Date: Sep 2008 Location: Oklahoma Posts: 2,118	Re: My 1965 build thread Nice, nice, nice. Awsome work Alan.

05-02-2009, 11:20 PM	#967
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My 1965 build thread __________________ *CHEVY ONLY*

05-03-2009, 10:54 AM	#968
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: My 1965 build thread AWESOME!! Your teasing us. Hurry up and finish it. I know you want it done more than we do. Time is the factor, HUH?. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

05-03-2009, 12:23 PM	#969
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: My 1965 build thread lookin good __________________ Gage 1967 C10 Shortbed Stepside

05-03-2009, 01:32 PM	#970
ol Curt Junior Member Join Date: Dec 2006 Location: Newburgh, IN Posts: 1,247	Re: My 1965 build thread Hey Alan, On post 72 of your build page I see the holes for all the after market parts don't match up. I have that same dilemma and can solve that, but my front cab brace doesn't come out far enough to meet the outer or inner rocker. It is probably 1/2" short and is all the way out. Think i should try to go back and add on to it on the inboard side or bush over the bolts in the gap? I'll post some pics on my post tonight. Bob __________________ 1966 Chevy C10 Longbed I'm Bob....ol Curt was my Grandpa The truck was his and he sure as heck wouldn't understand why I took a perfectly good truck and tore it down!



Register or Log In To remove these advertisements.

05-03-2009, 05:38 PM	#971
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	Re: My 1965 build thread Well you were busy the last couple days, while I was out goofing off at a truck show. It looks GREAT Alan! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

05-03-2009, 08:15 PM	#973
Old School Kid Rottenwood Garage Member..Yes! Join Date: Oct 2008 Location: Marietta, Georgia Posts: 174	Re: My 1965 build thread I have been out of town and touch for a few weeks.... Just got caught up... It looks great Alan! Maybe I'll bump into you on the 16th? __________________ When interests become diversified, not all can be Barrett Jackson. Budgets and Accountants get in the way. My 65 (SOLD) http://67-72chevytrucks.com/vboard/s...d.php?t=317013 My 51 (SOLD) http://67-72chevytrucks.com/vboard/s...80#post3551880 Racetruck III (SOLD) http://67-72chevytrucks.com/vboard/s...72#post4254972 Rottenwood Garage and Speed Shop.....where everything must be racy! Gone to dark side for a while...1966 F100 in the stable Last edited by Old School Kid; 05-03-2009 at 08:16 PM.

05-04-2009, 11:16 AM	#974
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Re: My 1965 build thread NASA called and they said you've got to take out a permit to have something that bright here on Earth. __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

05-04-2009, 11:55 AM	#975
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: My 1965 build thread Very classy Alan,,,very classy. __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

Register or Log In To remove these advertisements.