1958 Apache 38 Dually Dump Project - Page 39 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Dieselwrencher** · 04-06-2021, 08:09 AM

Those mirrors look nice and fit your build theme. How's everything in OK?

RockTonka · 04-14-2021, 09:16 PM

Thanks Ryan, we're doing fine...just weathering this storm like everybody else. How bout y'all?

**Dieselwrencher** · 04-15-2021, 05:53 AM

We just had another kiddo about a month ago. We're doing the same. Just trying to keep up. Things have been super busy lately.

RockTonka · 08-22-2022, 12:45 AM

Started fooling with this again...not running yet, but pulled it out of the shop to get the inner steps bed-lined. I'm gonna work on the interior a bit.

6DoF · 08-22-2022, 11:09 AM

i was just thinking the other day about your truck and what was new

**Ol Blue K20** · 08-23-2022, 10:21 AM

Nice to hear you're back on it

lower50's · 08-23-2022, 06:35 PM

Sometimes you just need a bit of a brake, glad to see your getting back at it.

RockTonka · 08-28-2022, 07:19 PM

Quote:

Originally Posted by 6DoF

i was just thinking the other day about your truck and what was new

Not to much

, but getting back into it.

Quote:

Originally Posted by Ol Blue K20

Nice to hear you're back on it

Thanks!

Quote:

Originally Posted by lower50's

Sometimes you just need a bit of a brake, glad to see your getting back at it.

Yep, summer was too damn hot...hard to get motivated.

Working with our interior guy...knocking out parts and pieces over the weekends for a bit. Got the lower door panels done...same tweed/pattern as on the seat.

RockTonka · 09-04-2022, 02:34 AM

Headliner and back of cab done today...

RockTonka · 09-07-2022, 01:31 AM

Had some time Monday to finish Dynamatting the cab...tranny tunnel and up under the dash. I picked up the re-covered visors today...I like the look.

57tailgater · 09-07-2022, 12:47 PM

I see you're using a stock speaker box. Tried searching your thread for details but didn't find any on how you did the speaker(s), wiring etc. Any details you can share? Great build!

RockTonka · 09-07-2022, 05:06 PM

Quote:

Originally Posted by 57tailgater

I see you're using a stock speaker box. Tried searching your thread for details but didn't find any on how you did the speaker(s), wiring etc. Any details you can share? Great build!

Thanks! We aren't installing a stereo in this, but I wasn't ready to close off the speaker box when we were working through the cab smoothing.

We may incorporate a back-up camera monitor in the box, but haven't decided that for sure yet.

57tailgater · 09-08-2022, 12:48 PM

Quote:

Originally Posted by RockTonka

Thanks! We aren't installing a stereo in this, but I wasn't ready to close off the speaker box when we were working through the cab smoothing.

We may incorporate a back-up camera monitor in the box, but haven't decided that for sure yet.

Thanks. I had thought of putting a couple of gauges up there once but a back-up monitor/screen is a great idea. I'll keep an eye out to see what you do.

RockTonka · 10-09-2022, 02:53 AM

We finished up the last of interior today and started running a few more wires...baby steps still.

**G&R's57GMC** · 10-13-2022, 12:50 AM

I just read through the whole build , Great Project , fantastic fab skills love the truck !

But if one were to name it or have a theme it would have to be something along the lines of Swiss Cheese , what with all the dimple dies and holes . I can see a Logo on the doors now

**G&R's57GMC** · 10-13-2022, 11:03 AM

What a difference a Logo makes ...

Went from "ya it has potential" to "Cool" , "Was it a station truck ?" These were some of the comments it got a the local Chevy Show a year apart .

6DoF · 10-13-2022, 12:07 PM

it really does complete a package look!

RockTonka · 10-28-2022, 02:39 AM

...

RockTonka · 02-15-2023, 01:55 AM

I've been holding off putting stock interior door handles on...just didn't do much for me. My son and I were playing around with ideas and designed these, we asked Mike's Billet Mirrors out of San Marcos, Texas (same guy that did our mirrors) to build these for us.

lower50's · 02-15-2023, 09:09 AM

Those look really cool. Suite the truck for sure.

RockTonka · 02-15-2023, 11:03 PM

Quote:

Originally Posted by lower50's

Those look really cool. Suite the truck for sure.

Thank you! I'm doing everything I can to run this speed hole deal into the ground!

RockTonka · 04-01-2024, 02:46 AM

Welp, it's up and running...

**Rickysnickers** · 04-01-2024, 09:20 AM

Well Done!!!!!!

**rgunlock** · 04-01-2024, 11:10 AM

Turned out amazing!!

dsraven · 04-01-2024, 12:18 PM

looks awesome, and a little intimidating for the pushcart car crowd, haha
have you done an alignment? maybe just the pics but wheels look toe'd out. that'll burn tires off fast if so.
love the metalwork detail. great job, thanks for posting.

04-06-2021, 08:09 AM	#951
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: 1958 Apache 38 Dually Dump Project Those mirrors look nice and fit your build theme. How's everything in OK? __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

04-14-2021, 09:16 PM	#952
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,524	Re: 1958 Apache 38 Dually Dump Project Thanks Ryan, we're doing fine...just weathering this storm like everybody else. How bout y'all? __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

04-15-2021, 05:53 AM	#953
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: 1958 Apache 38 Dually Dump Project We just had another kiddo about a month ago. We're doing the same. Just trying to keep up. Things have been super busy lately. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

08-22-2022, 12:45 AM	#954
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,524	Re: 1958 Apache 38 Dually Dump Project Started fooling with this again...not running yet, but pulled it out of the shop to get the inner steps bed-lined. I'm gonna work on the interior a bit. Attached Images __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

08-22-2022, 11:09 AM	#955
6DoF Registered User Join Date: Nov 2014 Location: somewhere, PA Posts: 1,088	Re: 1958 Apache 38 Dually Dump Project i was just thinking the other day about your truck and what was new

08-23-2022, 10:21 AM	#956
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,242	Re: 1958 Apache 38 Dually Dump Project Nice to hear you're back on it __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

08-23-2022, 06:35 PM	#957
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: 1958 Apache 38 Dually Dump Project Sometimes you just need a bit of a brake, glad to see your getting back at it. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

09-04-2022, 02:34 AM	#959
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,524	Re: 1958 Apache 38 Dually Dump Project Headliner and back of cab done today... Attached Images __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

09-07-2022, 01:31 AM	#960
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,524	Re: 1958 Apache 38 Dually Dump Project Had some time Monday to finish Dynamatting the cab...tranny tunnel and up under the dash. I picked up the re-covered visors today...I like the look. Attached Images __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

09-07-2022, 12:47 PM	#961
57tailgater Registered User Join Date: Nov 2011 Location: Middle Georgia Posts: 302	Re: 1958 Apache 38 Dually Dump Project I see you're using a stock speaker box. Tried searching your thread for details but didn't find any on how you did the speaker(s), wiring etc. Any details you can share? Great build!

10-09-2022, 02:53 AM	#964
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,524	Re: 1958 Apache 38 Dually Dump Project We finished up the last of interior today and started running a few more wires...baby steps still. Attached Images __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

10-13-2022, 12:50 AM	#965
G&R's57GMC Senior Member Join Date: Aug 2010 Location: Shasta Lake, CA. Posts: 1,619	Re: 1958 Apache 38 Dually Dump Project I just read through the whole build , Great Project , fantastic fab skills love the truck ! But if one were to name it or have a theme it would have to be something along the lines of Swiss Cheese , what with all the dimple dies and holes . I can see a Logo on the doors now __________________ Glen & Jane's Rides ‘57 GMC NAPCO Long Bed V8 4 speed Bought 2008 7 other cars & trucks , 5 trailers '56 Chevy Long Bed I6, 4 speed Bought 1990 Sold 8.22.2020 ’56 GMC Suburban Pickup V8, 4 speed Hydramatic Bought 1996 Sold 10.11.2020 My Other Tinkerings http://67-72chevytrucks.com/vboard/s...75#post8967275

10-13-2022, 11:03 AM	#966
G&R's57GMC Senior Member Join Date: Aug 2010 Location: Shasta Lake, CA. Posts: 1,619	Re: 1958 Apache 38 Dually Dump Project What a difference a Logo makes ... Went from "ya it has potential" to "Cool" , "Was it a station truck ?" These were some of the comments it got a the local Chevy Show a year apart . Attached Images __________________ Glen & Jane's Rides ‘57 GMC NAPCO Long Bed V8 4 speed Bought 2008 7 other cars & trucks , 5 trailers '56 Chevy Long Bed I6, 4 speed Bought 1990 Sold 8.22.2020 ’56 GMC Suburban Pickup V8, 4 speed Hydramatic Bought 1996 Sold 10.11.2020 My Other Tinkerings http://67-72chevytrucks.com/vboard/s...75#post8967275 Last edited by G&R's57GMC; 10-13-2022 at 11:10 AM.

10-13-2022, 12:07 PM	#967
6DoF Registered User Join Date: Nov 2014 Location: somewhere, PA Posts: 1,088	Re: 1958 Apache 38 Dually Dump Project it really does complete a package look!

10-28-2022, 02:39 AM	#968
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,524	Re: 1958 Apache 38 Dually Dump Project ... Attached Images __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread



Register or Log In To remove these advertisements.

02-15-2023, 01:55 AM	#969
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,524	Re: 1958 Apache 38 Dually Dump Project I've been holding off putting stock interior door handles on...just didn't do much for me. My son and I were playing around with ideas and designed these, we asked Mike's Billet Mirrors out of San Marcos, Texas (same guy that did our mirrors) to build these for us. Attached Images __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

02-15-2023, 09:09 AM	#970
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: 1958 Apache 38 Dually Dump Project Those look really cool. Suite the truck for sure. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

04-01-2024, 02:46 AM	#972
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,524	Re: 1958 Apache 38 Dually Dump Project Welp, it's up and running... Attached Images __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread Last edited by RockTonka; 04-01-2024 at 02:55 AM.

04-01-2024, 09:20 AM	#973
Rickysnickers Senior Member Join Date: Oct 2014 Location: Eagle, ID Posts: 3,024	Re: 1958 Apache 38 Dually Dump Project Well Done!!!!!!

04-01-2024, 11:10 AM	#974
rgunlock Senior Member Join Date: Jul 2009 Location: Tomball, Texas Posts: 1,592	Re: 1958 Apache 38 Dually Dump Project Turned out amazing!! __________________ Rick 78 GMC K15 SWB, 350/NV4500/NP205/4.10s Project Hazel 71 GMC C25 350/TH400 - Project Angie 59 Chevy SWB Stepside (next in line? Not sure now ) 2001 GMC Sierra K2500

04-01-2024, 12:18 PM	#975
dsraven Registered User Join Date: Nov 2010 Location: calgary alberta Posts: 8,188	Re: 1958 Apache 38 Dually Dump Project looks awesome, and a little intimidating for the pushcart car crowd, haha have you done an alignment? maybe just the pics but wheels look toe'd out. that'll burn tires off fast if so. love the metalwork detail. great job, thanks for posting.

Register or Log In To remove these advertisements.