13" and 14" Corvette Brakes for C10's - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dkauffman05 · 10-06-2014, 09:00 PM

Anything g ever come of the camaro or cts calipers on a cpp modular spindle ? Or what's the cheapes route to make them happen ? I plan on running 18" wheels.

raic65 · 10-28-2014, 05:16 PM

Quote:

Originally Posted by dkauffman05

Anything g ever come of the camaro or cts calipers on a cpp modular spindle ? Or what's the cheapes route to make them happen ? I plan on running 18" wheels.

I made a set of brackets for my setup. See post 5. I believe John Glenn (astronaut) is doing the same with his C10.

http://67-72chevytrucks.com/vboard/s...22#post5891322

DC43 · 10-07-2014, 02:22 AM

Are you still offering the kits? do you have a rear kit available? Pm me prices for a 5x4.75 if you still are. Thanks

chase@ridetech · 10-28-2014, 02:53 PM

I may have missed it, but do these work with our Ridetech modular C-10 Spindles?

skorpioskorpio · 10-28-2014, 04:14 PM

This is my setup for the CPP modular with the Z51 PBR sliders for 13 1/2" rotors. It required spot machining the spindles as the CPP spindles are only faced on one side and my dual sandwiched bracket and spacer setup needed flat parallel surfaces on both sides. A lot of this has to do with the increased offset distance my custom hubs and pin mount adapters needed. It pushed the caliper too far out from the spindle to deal with with spacers on brackets on one side only. I was worried I would introduce a lot of caliper shudder if not outright failure of the casting. These were custom made for me (along with custom milled hubs) by Kore3. Oh and they do clear an 18" wheel, well mine anyway, but only by about 1/8th of an inch.
Name: IMG_0305.jpg
Views: 4467
Size: 21.7 KB

Name: IMG_0305.jpg
Views: 4467
Size: 21.7 KB

Name: IMG_0307.jpg
Views: 4421
Size: 23.5 KB

ranger2339 · 12-06-2015, 08:46 PM

Are these kits sill available?

G8DAN · 02-27-2016, 05:29 PM

Bump. Are the kits still available? I may be interested in one within the next few weeks.

G8DAN · 03-30-2016, 08:52 PM

Would you still be open to having us send you the CTSV rotors and calipers for designing of the bracket?

chevyschevy · 11-01-2018, 10:38 AM

Anyone know if these are still available?
Looking to buy now.

**way2lo2** · 11-01-2018, 10:48 AM

Quote:

Originally Posted by chevyschevy

Anyone know if these are still available?
Looking to buy now.

yes sir

chevyschevy · 11-01-2018, 10:59 AM

PM sent

siggyfreud · 03-17-2019, 11:56 PM

Still selling these? I PM'ed you a few weeks back but haven't seen anything.

EVRLET · 03-18-2019, 01:14 AM

Kore3 also specializes in Corvette brakes. I have the Z06 front and rear on my 67.

siggyfreud · 03-18-2019, 07:25 PM

I got a reply to my PM, and have responded. Looks like they're still selling them, just have gone a little quiet on the thread perhaps.

10-06-2014, 09:00 PM	#1
dkauffman05 Registered User Join Date: Jan 2008 Location: Cumming, Georgia Posts: 417	Re: 13" and 14" Corvette Brakes for C10's Anything g ever come of the camaro or cts calipers on a cpp modular spindle ? Or what's the cheapes route to make them happen ? I plan on running 18" wheels.

10-07-2014, 02:22 AM	#3
DC43 Registered User Join Date: May 2014 Location: California Posts: 11	Re: 13" and 14" Corvette Brakes for C10's Are you still offering the kits? do you have a rear kit available? Pm me prices for a 5x4.75 if you still are. Thanks

10-28-2014, 02:53 PM	#4
chase@ridetech Registered User Join Date: Jun 2013 Location: Jasper Posts: 256	Re: 13" and 14" Corvette Brakes for C10's I may have missed it, but do these work with our Ridetech modular C-10 Spindles?

10-28-2014, 04:14 PM	#5
skorpioskorpio Registered User Join Date: Nov 2010 Location: Los Angeles, CA Posts: 1,018	Re: 13" and 14" Corvette Brakes for C10's This is my setup for the CPP modular with the Z51 PBR sliders for 13 1/2" rotors. It required spot machining the spindles as the CPP spindles are only faced on one side and my dual sandwiched bracket and spacer setup needed flat parallel surfaces on both sides. A lot of this has to do with the increased offset distance my custom hubs and pin mount adapters needed. It pushed the caliper too far out from the spindle to deal with with spacers on brackets on one side only. I was worried I would introduce a lot of caliper shudder if not outright failure of the casting. These were custom made for me (along with custom milled hubs) by Kore3. Oh and they do clear an 18" wheel, well mine anyway, but only by about 1/8th of an inch.

12-06-2015, 08:46 PM	#6
ranger2339 Registered User Join Date: May 2010 Location: Stillwater,MN Posts: 39	Re: 13" and 14" Corvette Brakes for C10's Are these kits sill available?

02-27-2016, 05:29 PM	#7
G8DAN Registered User Join Date: Dec 2012 Location: Sylmar, CA Posts: 79	Re: 13" and 14" Corvette Brakes for C10's Bump. Are the kits still available? I may be interested in one within the next few weeks.

03-30-2016, 08:52 PM	#8
G8DAN Registered User Join Date: Dec 2012 Location: Sylmar, CA Posts: 79	Re: 13" and 14" Corvette Brakes for C10's Would you still be open to having us send you the CTSV rotors and calipers for designing of the bracket?

11-01-2018, 10:38 AM	#9
chevyschevy Registered User Join Date: Oct 2018 Location: portland Posts: 2	Re: 13" and 14" Corvette Brakes for C10's Anyone know if these are still available? Looking to buy now.

11-01-2018, 10:59 AM	#11
chevyschevy Registered User Join Date: Oct 2018 Location: portland Posts: 2	Re: 13" and 14" Corvette Brakes for C10's PM sent

03-17-2019, 11:56 PM	#12
siggyfreud Registered User Join Date: Jun 2012 Location: Portland Posts: 1,330	Re: 13" and 14" Corvette Brakes for C10's Still selling these? I PM'ed you a few weeks back but haven't seen anything. __________________ Current Build - Project "Ghost of Poseidon" 72 C10 Pro-touring build Previous Build - 66 GMC Pro-touring build. Sold.

03-18-2019, 01:14 AM	#13
EVRLET Registered User Join Date: Aug 2015 Location: Las Vegas NV Posts: 369	Re: 13" and 14" Corvette Brakes for C10's Kore3 also specializes in Corvette brakes. I have the Z06 front and rear on my 67. __________________ Customization is what you want it to look like -- not what other people think it should look like

03-18-2019, 07:25 PM	#14
siggyfreud Registered User Join Date: Jun 2012 Location: Portland Posts: 1,330	Re: 13" and 14" Corvette Brakes for C10's I got a reply to my PM, and have responded. Looks like they're still selling them, just have gone a little quiet on the thread perhaps. __________________ Current Build - Project "Ghost of Poseidon" 72 C10 Pro-touring build Previous Build - 66 GMC Pro-touring build. Sold.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.