RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jpoole · 11-24-2014, 04:09 PM

Hi, I have a 402 bored .030 over and what looks to be a 2 core radiator with room in front and an inch in back on the tank when compared to the radiator core.

I am probably around 500 hp and am looking for a radiator and fan setup with wiring and relays.

What do you suggest.

thanks, jeff

SparkyRnD · 11-24-2014, 04:13 PM

Based on location in Texas, and the HP, I'd go with our upgraded dual-speed 17" fan & shroud kit along with the radiator to keep it cool.

1. radiator with discount is $425
2. upgraded fan & shroud kit with discount is $320
3. controller with relay kit is $75

jpoole · 11-24-2014, 04:36 PM

Quote:

Originally Posted by SparkyRnD

Based on location in Texas, and the HP, I'd go with our upgraded dual-speed 17" fan & shroud kit along with the radiator to keep it cool.

1. radiator with discount is $425
2. upgraded fan & shroud kit with discount is $320
3. controller with relay kit is $75

Sounds good how do I order and what is turn around time? My rad is leaking from a crack next to filler neck.

Also, what radiator cap to use on a closed system?

thanks, Jeff

SparkyRnD · 11-24-2014, 04:45 PM

I just need an email address and I can send a payment request / invoice. Turn around time is about 2 weeks. For the cap, any standard 12-14lb cap works fine (I prefer the safety cap style)

jpoole · 11-24-2014, 05:01 PM

Hi Sparky, one more question. I have an electric fan pushing through the condenser on front, can I remove that with the high output dual fan setup? Also, I want quiet fans, how noisy are the high output ones?

jpoole · 11-24-2014, 05:04 PM

Also, I have a serpintine belt system from chevrolet high performace and it must fit.

SparkyRnD · 11-24-2014, 05:10 PM

the radiator is about 3.5" wide, and the dual-speed 17 fan (note that it is a single 17" fan that has a high and low speed) is about the same width, so you'll need around 7" from front to back. For the existing pusher fan, you may be able to remove that but I'd wait until this set up is in place. You will need 3/4" air space min. between the radiator and the condenser.

jpoole · 11-24-2014, 05:29 PM

Hi Sparky, is the standard setup dual fans with shroud? Also, here are some pics. There is like 6.5 inches from very front of core support to accessories. attached a couple of pics.

thanks, Jeff

SparkyRnD · 11-24-2014, 05:32 PM

here is the standard dual 12" configuration:

jpoole · 11-24-2014, 05:44 PM

PM Sent

SparkyRnD · 11-24-2014, 06:34 PM

Jeff, thanks for your time on the phone today

jpoole · 11-24-2014, 06:50 PM

Sparky knows his cooling!

SparkyRnD · 11-28-2014, 12:09 PM

Jeff, we may have another option for your tight quarters. Give me a shout on Monday or we can discuss via PM.

69 c10 FS project · 11-28-2014, 06:51 PM

Sparky,
Post #46 finally time to order. Are you price still the same? And how can I complete the order with you, would like to talk prior to ordering

SparkyRnD · 12-01-2014, 09:51 AM

Yes, prices are still the same. To complete an order, I just need you to PM me with your email address and a phone number.

67ctener · 12-12-2014, 04:12 PM

Pm sent. Forgot to add 98271 is my zip

SparkyRnD · 12-15-2014, 11:49 AM

replied!

SparkyRnD · 12-19-2014, 10:29 AM

Pre-Christmas bump!

SparkyRnD · 01-07-2015, 10:10 AM

Bringing up for the new year!

SparkyRnD · 01-14-2015, 12:45 PM

Thanks for the support guys!

Lee H · 01-14-2015, 12:50 PM

Installed my new radiator this week. Great product.

SparkyRnD · 01-14-2015, 01:01 PM

Thanks, would love to see installed pics!

Lee H · 01-14-2015, 02:44 PM

Quote:

Originally Posted by SparkyRnD

Thanks, would love to see installed pics!

Already have the covers on but here goes.

SparkyRnD · 01-19-2015, 09:11 PM

is that the factory shroud?

Lee H · 01-19-2015, 10:15 PM

Quote:

Originally Posted by SparkyRnD

is that the factory shroud?

Yes, factory AC shroud trimmed 3/4 inch. Will probably trim an addition 1/4 inch next time it's off.

11-24-2014, 04:09 PM	#76
jpoole Registered User Join Date: Oct 2014 Location: McKinney, TX Posts: 31	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! Hi, I have a 402 bored .030 over and what looks to be a 2 core radiator with room in front and an inch in back on the tank when compared to the radiator core. I am probably around 500 hp and am looking for a radiator and fan setup with wiring and relays. What do you suggest. thanks, jeff

11-24-2014, 04:13 PM	#77
SparkyRnD Registered User Join Date: Dec 2011 Location: acworth georgia Posts: 890	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! Based on location in Texas, and the HP, I'd go with our upgraded dual-speed 17" fan & shroud kit along with the radiator to keep it cool. 1. radiator with discount is $425 2. upgraded fan & shroud kit with discount is $320 3. controller with relay kit is $75 __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

11-24-2014, 04:45 PM	#79
SparkyRnD Registered User Join Date: Dec 2011 Location: acworth georgia Posts: 890	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! I just need an email address and I can send a payment request / invoice. Turn around time is about 2 weeks. For the cap, any standard 12-14lb cap works fine (I prefer the safety cap style) __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

11-24-2014, 05:01 PM	#80
jpoole Registered User Join Date: Oct 2014 Location: McKinney, TX Posts: 31	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! Hi Sparky, one more question. I have an electric fan pushing through the condenser on front, can I remove that with the high output dual fan setup? Also, I want quiet fans, how noisy are the high output ones?

11-24-2014, 05:04 PM	#81
jpoole Registered User Join Date: Oct 2014 Location: McKinney, TX Posts: 31	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! Also, I have a serpintine belt system from chevrolet high performace and it must fit.

11-24-2014, 05:10 PM	#82
SparkyRnD Registered User Join Date: Dec 2011 Location: acworth georgia Posts: 890	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! the radiator is about 3.5" wide, and the dual-speed 17 fan (note that it is a single 17" fan that has a high and low speed) is about the same width, so you'll need around 7" from front to back. For the existing pusher fan, you may be able to remove that but I'd wait until this set up is in place. You will need 3/4" air space min. between the radiator and the condenser. __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

11-24-2014, 05:29 PM	#83
jpoole Registered User Join Date: Oct 2014 Location: McKinney, TX Posts: 31	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! Hi Sparky, is the standard setup dual fans with shroud? Also, here are some pics. There is like 6.5 inches from very front of core support to accessories. attached a couple of pics. thanks, Jeff Attached Images

11-24-2014, 05:32 PM	#84
SparkyRnD Registered User Join Date: Dec 2011 Location: acworth georgia Posts: 890	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! here is the standard dual 12" configuration: __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

11-24-2014, 05:44 PM	#85
jpoole Registered User Join Date: Oct 2014 Location: McKinney, TX Posts: 31	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! PM Sent

11-24-2014, 06:34 PM	#86
SparkyRnD Registered User Join Date: Dec 2011 Location: acworth georgia Posts: 890	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! Jeff, thanks for your time on the phone today __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

11-24-2014, 06:50 PM	#87
jpoole Registered User Join Date: Oct 2014 Location: McKinney, TX Posts: 31	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! Sparky knows his cooling!

11-28-2014, 12:09 PM	#88
SparkyRnD Registered User Join Date: Dec 2011 Location: acworth georgia Posts: 890	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! Jeff, we may have another option for your tight quarters. Give me a shout on Monday or we can discuss via PM. __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

11-28-2014, 06:51 PM	#89
69 c10 FS project Registered User Join Date: Jan 2014 Location: Columbia ct Posts: 5	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! Sparky, Post #46 finally time to order. Are you price still the same? And how can I complete the order with you, would like to talk prior to ordering

12-01-2014, 09:51 AM	#90
SparkyRnD Registered User Join Date: Dec 2011 Location: acworth georgia Posts: 890	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! Yes, prices are still the same. To complete an order, I just need you to PM me with your email address and a phone number. __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

12-12-2014, 04:12 PM	#91
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! Pm sent. Forgot to add 98271 is my zip __________________ Scott 67 c10 sold 89 c1500 90 k2500 91 s10 #chevyonly



Register or Log In To remove these advertisements.

12-15-2014, 11:49 AM	#92
SparkyRnD Registered User Join Date: Dec 2011 Location: acworth georgia Posts: 890	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! replied! __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

12-19-2014, 10:29 AM	#93
SparkyRnD Registered User Join Date: Dec 2011 Location: acworth georgia Posts: 890	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! Pre-Christmas bump! __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

01-07-2015, 10:10 AM	#94
SparkyRnD Registered User Join Date: Dec 2011 Location: acworth georgia Posts: 890	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! Bringing up for the new year! __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

01-14-2015, 12:45 PM	#95
SparkyRnD Registered User Join Date: Dec 2011 Location: acworth georgia Posts: 890	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! Thanks for the support guys! __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

01-14-2015, 12:50 PM	#96
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,147	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! Installed my new radiator this week. Great product. __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

01-14-2015, 01:01 PM	#97
SparkyRnD Registered User Join Date: Dec 2011 Location: acworth georgia Posts: 890	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! Thanks, would love to see installed pics! __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

01-19-2015, 09:11 PM	#99
SparkyRnD Registered User Join Date: Dec 2011 Location: acworth georgia Posts: 890	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! is that the factory shroud? __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

Register or Log In To remove these advertisements.