Project#1: Bright Horizons - 68 Swb big block on Air!

[1972BackInBlackC10]

Originally Posted by VA72C10

Thanks!

Here are some pictures of parts gathered. These are some of the engine related and under-hood items.

New CPP booster/master/bracket/prop valve/lines setup
New ceramic coated headers with collectors
Rebuilt 73-up motor mounts (very similar to 72 bb mounts) for header clearance...stripped/painted/new rubber in the mounts.
Clutch fan (one pictured is actually too big but I have another one)
Perfect fan shroud
Rad cover (going to tweak this one or custom make something)
powdercoated 68 center latch support
NOS black plastic washer jug (corvette option truck now )
Holley 570 carb with stainless dual feed fuel line lightly used from this forum

very nice parts, awesome start for a truck, good work on the bed, is that roll of lino what your using for the floor in the cab?

[VA72C10]

Originally Posted by Jastos

OK now I am officially excited. No more injuring yourself!

COOL!

1st post by the Owner of the truck!

Glad you're excited

I will do my best to not injure myself further (although I skinned up my ankle today on a burb's jagged rear wheel well while leaning over doing some grinding )

[VA72C10]

Originally Posted by 1972BackInBlackC10

very nice parts, awesome start for a truck, good work on the bed, is that roll of lino what your using for the floor in the cab?

that's been there for months....holding it for my mother-in-law

[XxCHEVYMANxX]

Nice to see you got the house repairs out of the way. Now you can get busy on the project ! Oh and no more head injuries, you might need to use it.
kidding, glad you ok.

[VA72C10]

Originally Posted by XxCHEVYMANxX

Nice to see you got the house repairs out of the way. Now you can get busy on the project ! Oh and no more head injuries, you might need to use it.
kidding, glad you ok.

Thanks man. Got the top side of the bed 90% done today. Would have finished but I got there late....still dealing with insurance payment issues for the home repairs...

Then...once I got there and got everything out it decided to start sprinkling so I had to pull the welder and everything electrical back in. It did that three times so it was a constant setup/move inside with the tools that took more time than anything else today...

Glenn and one of his workers helped me take the bed off and stand it up so I could finish the underside...also had to get some dents out of the floor. Got those taken care of...

[VA72C10]

Here is the bed tipped up and the patches all primed. Several were just pinholes I sanded to make sure there was no more rust and then filled.
Posted via Mobile Device

[VA72C10]

Here are some pictures of the underside....
Posted via Mobile Device

[VA72C10]

More
Posted via Mobile Device

[VA72C10]

It's not all good though
Two spots I didn't see before when looking at the cross sils while it was bolted to the frame. Not bad at all though...

And frame is clean...just needs a little more cleanup in a few areas before paint...they painted it but not up to my standards

[VA72C10]

Here's some of the tools I used (most were put away already) and a picture of the bed sill patch made and in place ready to weld (tomorrow hopefully)
Posted via Mobile Device

[VA72C10]

The patch fit closer on the left until I started cleaning up that side to be able to weld to....the metal simply disapeared....I'll get it though

Here is one last area I worked on today.....right side taillight area....it was missing metal so I made and welded a patch in there also....no before's....only "during's"
Posted via Mobile Device
Posted via Mobile Device

[VA72C10]

The last is a quick shot of primer in a can since it looked like rain again....with a wipe of filler this will look great! Oh, and those welds don't look so hot because I forgot to turn the gas on that time I turned it on right after I took the picture (helmet off so I could see the ugly welds
Posted via Mobile Device

[VA72C10]

No filler in any of the pictures....I figure whoever buys this bed wil media blast or sand it down before final bodywork and paint. It'll be super nice once I get the last two patches done...
Posted via Mobile Device

[NewType72]

thats a fairly clean fleetside metal bed too bad i prefer my wood bed over the metals im sure someone will be happy to have it

[VA72C10]

Originally Posted by NewType72

thats a fairly clean fleetside metal bed too bad i prefer my wood bed over the metals im sure someone will be happy to have it

Have a guy coming tomorrow to look at it. Seems very interested and a serious buyer so we will see...

Will have some completed bed pictures tomorrow.

[VA72C10]

Some more parts....
Posted via Mobile Device

[Bennett68C10]

Good luck with your business, can't wait to see how your first truck turns out. Also, nice pile of parts you have there.

[VA72C10]

Originally Posted by Bennett--G4L

Good luck with your business, can't wait to see how your first truck turns out. Also, nice pile of parts you have there.

Thanks, going to turn out the best product I possibly can....getting help where I don't have the experience like paint.

I've got a few piles of parts takes a lot to build a truck . Will keep organizing and posting them as I go and as the project continues so guys who are considering a project can see what goes into each truck.
Posted via Mobile Device

[VA72C10]

Working on finishing the bed now. Really happy how the patch came out...

One more to go...
Posted via Mobile Device

[ECU PIRATE]

NICE!!!!!!!!!!!!!!!!!!!!!!!! I may be heading down the same route as you once I can get a new spot in the country and build a detached garage. One of these Saturday's, I am going to jump in the car and ride down to Midlo and check you out.

[tantrumpipeline]

definitely in for this,looks like a great start

[VA72C10]

Originally Posted by ECU PIRATE

NICE!!!!!!!!!!!!!!!!!!!!!!!! I may be heading down the same route as you once I can get a new spot in the country and build a detached garage. One of these Saturday's, I am going to jump in the car and ride down to Midlo and check you out.

Originally Posted by tantrumpipeline

definitely in for this,looks like a great start

Thanks! Not everything went as well as the first patch found some more pits wjen looking through and seeing light. Thankfully they are small areas I can fill with weld then grind. It was mid 80's but in the sun felt like a lot more

Was working on the other patch and got a good patch panel made with the shop's metal brake...but found the rust went further so decided to scrap that for a larger patch. The brake wouldn't allow me to bend it tight enough so I will "section" it....taking some out of the middle to drop the raised area down. Looks like it will fit great after I do that and I willl call the bed finished...

The guy who wants to purchase the bed couldn't get off work early enough to come today....hoping tomorrow or sat.
Posted via Mobile Device

[NewType72]

man the new piece in the last picture posted even has that same old school bend from rough and tough years lol now that's a true restoration great fab work man lookin goof and it's just a cash maker not the project itself lol I can only imagine what the finished truck will be now

[VA72C10]

Originally Posted by NewType72

man the new piece in the last picture posted even has that same old school bend from rough and tough years lol now that's a true restoration great fab work man lookin goof and it's just a cash maker not the project itself lol I can only imagine what the finished truck will be now

hammered it one time trying to get it to pop into place...will tweak that back when I get it welded in place.

I am doing my best to improve as a welder so I can complete everything myself instead of relying on help from the body shop owner (who is more than willing to help)

I know this is just a cross sill on the underside of the bed which really never will be seen....but if I'm going to do this...I'm going to do it right!

[NewType72]

and that's the attitude that makes you a great candidate to do an adventure like this kudos my man