MO Parting out 67 long bed step side, 283 with 3 ott. - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**specialtyretail** · 12-14-2014, 07:05 PM

Quote:

Originally Posted by 74CustomK20

Looks good from pics? The sides and front n bottom is my worries as the fenders n steps will be replaced regardless. Looks like diamond plate? How's bottom look good?

You mean underneath? I have no idea. I have not been under it.

74CustomK20 · 12-14-2014, 07:17 PM

Yea underside. If the mounts and all is good and solid I'm REALLY REALLY interested,just figure out gas and time

**specialtyretail** · 12-14-2014, 07:29 PM

With my work schedule, it will be next weekend before I will get a chance to get underneath it. If it is where I can sooner, i will do it. Thanks, Fred.

74CustomK20 · 12-14-2014, 07:33 PM

I'm in absolutely no hurry. I'm free from the 25th to the 5th so anytime works for me! Just lemme see n know!

carguygregg · 12-14-2014, 07:39 PM

Thanks for the pics Fred. I think I'm going to have to just go ahead and buy new repop fenders. That's a fair price on the whole bed, but the fenders are just too rough for my truck.
Gregg

**specialtyretail** · 12-14-2014, 08:11 PM

Quote:

Originally Posted by carguygregg

Thanks for the pics Fred. I think I'm going to have to just go ahead and buy new repop fenders. That's a fair price on the whole bed, but the fenders are just too rough for my truck.
Gregg

Oh yeah, they are rough. I did not think you would want them, but I did not want to make that assumption (big word of the day) without letting you see them. Thanks, Fred.

**too much stuff** · 12-14-2014, 08:37 PM

Too bad about the 2 holes in the delete plate. I will take it unless someone else steps up and needs it. Thanks.

**specialtyretail** · 12-14-2014, 08:41 PM

Quote:

Originally Posted by too much stuff

Too bad about the 2 holes in the delete plate. I will take it unless someone else steps up and needs it. Thanks.

It is yours. Thanks, Fred.

**specialtyretail** · 12-14-2014, 08:52 PM

Quote:

Originally Posted by 74CustomK20

I'm in absolutely no hurry. I'm free from the 25th to the 5th so anytime works for me! Just lemme see n know!

I can work with that. I will check it out and get back with you. Thanks, Fred.

**zicc1835** · 12-14-2014, 08:54 PM

Quote:

Originally Posted by specialtyretail

Hey Jess. here is what I have. The harness was pretty cobbled up. I would do $30.00 shipped for the brackets, one reverse lamp and bolts. I have not taken the front fender emblems off yet but I am afraid the studs will probably break off when I do. Thanks, Fred.

Fred
ill take it all ....LMK what you want for fender emblems maybe a little heat on those bolts will help or soak them with the PB blaster... if you dont mind.... no hurry no RUSH for any of it, so you can ship all when you get the emblems off
thanks
Jess

**specialtyretail** · 12-14-2014, 09:12 PM

Quote:

Originally Posted by zicc1835

Fred
ill take it all ....LMK what you want for fender emblems maybe a little heat on those bolts will help or soak them with the PB blaster... if you dont mind.... no hurry no RUSH for any of it, so you can ship all when you get the emblems off
thanks
Jess

Sure thing Jess. it will probably be next weekend before I can get back on it, work and all that real life stuff, you know. Thanks, Fred.

**specialtyretail** · 12-14-2014, 09:24 PM

Quote:

Originally Posted by ScottH

Thanks fred, May not need the carb, how much for the alternator brackets & both pulleys?

Alternator brackets and water pump pulley & lower crankshaft pulley, $60.00 shipped. Thanks, Fred.

*low&slow* · 12-14-2014, 10:47 PM

At any point in time, do you think you'll be able to cut the cab for patch panels if no one buys the cab?

**too much stuff** · 12-15-2014, 12:33 AM

Quote:

Originally Posted by too much stuff

Too bad about the 2 holes in the delete plate. I will take it unless someone else steps up and needs it. Thanks.

Payment sent and split the fees. I forgot to add a note what the payment was for, sorry.

rockits · 12-15-2014, 12:55 AM

i would like the rearview mirror bracket if available

jaybatta · 12-15-2014, 12:55 AM

Does the wiper motor and bug juice squirter work? How many blades are on it? What would it cost plus shipping to 59870(Stevensville, Montana)? Thanks!

jaybatta · 12-15-2014, 01:07 AM

I hope I don't post twice, but I'd be interested in the wiper motor. How many prongs does it have? is it functional? Does the wiper washer fluid ..thing..work? What would you charge plus shipping to 59870(Stevensville, Montana)?
Thanks

**ScottH** · 12-15-2014, 01:27 AM

Fred, thanks for getting back to me, will let u know if I need them.

Scott

mattgoat · 12-15-2014, 01:31 AM

I will go for the headlight bezels if they are available still. I will also go for the gauge cluster if available also. Thanks Matt

**jmader** · 12-15-2014, 09:43 AM

Did you have a chance to check on the parts I asked about in posts #8 and 9? Thanks.

67chevy4x4c · 12-15-2014, 11:58 AM

How much for the fuse box and wiring if some one hasn't got it

**specialtyretail** · 12-15-2014, 12:31 PM

Quote:

Originally Posted by rockits

i would like the rearview mirror bracket if available

I have the complete rear view mirror listed on here, still available, for $19.00 shipped. Thanks, Fred.

**specialtyretail** · 12-15-2014, 12:40 PM

Quote:

Originally Posted by jmader

Also interested in the seat belts, boots and the thermostat housing. What about the intake manifold and distributor? What are the casting numbers on those?

I did not get the #'s for you yet. It is just an original old 2 bbl intake and points type distributor. The ear is still on the stat housing and I have not got the seat belts pulled yet, unsure on overall condition. Thanks, Fred.

**specialtyretail** · 12-15-2014, 04:08 PM

Quote:

Originally Posted by mattgoat

I will go for the headlight bezels if they are available still. I will also go for the gauge cluster if available also. Thanks Matt

Hey Matt, the bezels are yours. I would like to give another member a day or two on the cluster if you do not mind. Thanks, Fred.

**specialtyretail** · 12-15-2014, 04:59 PM

Quote:

Originally Posted by 67chevy4x4c

How much for the fuse box and wiring if some one hasn't got it

Let me get it pulled and see what condition it is in. Thanks, Fred.

12-14-2014, 07:17 PM	#77
74CustomK20 Registered User Join Date: Oct 2014 Location: Tell City, IN Posts: 637	Re: Parting out 67 long bed step side, 283 with 3 ott. Yea underside. If the mounts and all is good and solid I'm REALLY REALLY interested,just figure out gas and time __________________ Big Nate Carp. Local 224. Buy made in the USA! 03 F350 6.0 Daily Race Truck. 79 C70 366 Project Dump.

12-14-2014, 07:29 PM	#78
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,637	Re: Parting out 67 long bed step side, 283 with 3 ott. With my work schedule, it will be next weekend before I will get a chance to get underneath it. If it is where I can sooner, i will do it. Thanks, Fred. __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

12-14-2014, 07:33 PM	#79
74CustomK20 Registered User Join Date: Oct 2014 Location: Tell City, IN Posts: 637	Re: Parting out 67 long bed step side, 283 with 3 ott. I'm in absolutely no hurry. I'm free from the 25th to the 5th so anytime works for me! Just lemme see n know! __________________ Big Nate Carp. Local 224. Buy made in the USA! 03 F350 6.0 Daily Race Truck. 79 C70 366 Project Dump.

12-14-2014, 07:39 PM	#80
carguygregg Registered User Join Date: Mar 2014 Location: jefferson city, mo. Posts: 6	Re: Parting out 67 long bed step side, 283 with 3 ott. Thanks for the pics Fred. I think I'm going to have to just go ahead and buy new repop fenders. That's a fair price on the whole bed, but the fenders are just too rough for my truck. Gregg

12-14-2014, 08:37 PM	#82
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,723	Re: Parting out 67 long bed step side, 283 with 3 ott. Too bad about the 2 holes in the delete plate. I will take it unless someone else steps up and needs it. Thanks. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-14-2014, 10:47 PM	#88
low&slow Account Suspended Join Date: Jan 2009 Location: Kuna, Idaho Posts: 1,046	Re: Parting out 67 long bed step side, 283 with 3 ott. At any point in time, do you think you'll be able to cut the cab for patch panels if no one buys the cab?

12-15-2014, 12:55 AM	#90
rockits Registered User Join Date: Aug 2014 Location: az Posts: 11	Re: Parting out 67 long bed step side, 283 with 3 ott. i would like the rearview mirror bracket if available

12-15-2014, 12:55 AM	#91
jaybatta Registered User Join Date: Apr 2014 Location: Livingston, MT Posts: 838	Re: Parting out 67 long bed step side, 283 with 3 ott. Does the wiper motor and bug juice squirter work? How many blades are on it? What would it cost plus shipping to 59870(Stevensville, Montana)? Thanks! __________________ Joe 1968 K20 1970 K20 Semper Fi

12-15-2014, 01:07 AM	#92
jaybatta Registered User Join Date: Apr 2014 Location: Livingston, MT Posts: 838	Re: Parting out 67 long bed step side, 283 with 3 ott. I hope I don't post twice, but I'd be interested in the wiper motor. How many prongs does it have? is it functional? Does the wiper washer fluid ..thing..work? What would you charge plus shipping to 59870(Stevensville, Montana)? Thanks __________________ Joe 1968 K20 1970 K20 Semper Fi

12-15-2014, 01:27 AM	#93
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Parting out 67 long bed step side, 283 with 3 ott. Fred, thanks for getting back to me, will let u know if I need them. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

12-15-2014, 01:31 AM	#94
mattgoat Registered User Join Date: Oct 2009 Location: south san francisco CA Posts: 23	Re: Parting out 67 long bed step side, 283 with 3 ott. I will go for the headlight bezels if they are available still. I will also go for the gauge cluster if available also. Thanks Matt

12-15-2014, 09:43 AM	#95
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: Parting out 67 long bed step side, 283 with 3 ott. Did you have a chance to check on the parts I asked about in posts #8 and 9? Thanks. __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

12-15-2014, 11:58 AM	#96
67chevy4x4c Registered User Join Date: Jan 2012 Location: bartley w va Posts: 191	Re: Parting out 67 long bed step side, 283 with 3 ott. How much for the fuse box and wiring if some one hasn't got it



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.