Project "49 No Buck$" - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kustombrad · 05-11-2009, 08:00 PM

Sorry to keep everyone in suspense with the 'Old Brown Truck', but I needed to finish up a few things on a 72 El Camino I did from the frame up for my dad. Only thing I didn't do was the seat upholstery, transmission and rear gears. Way too much work, but it'll be cool for the "world's oldest 15 year old"! (He's 70!) I have about a weeks worth of little things after work and I can get back on my truck. Thought you'd like to see this anyway

kustombrad · 05-12-2009, 12:00 PM

Just in case anybody with a truck thinks theirs has no potential, this is what I started with in December!

Pretty pathetic, huh?

LOW DOUGH · 05-12-2009, 04:13 PM

yeah....

It was gleaming with potential then. I can see it beaming right off it. Distorting everythig around it. HAHAHAHAHAHAHHA

Looks great. Started with a nice looking truck.

av8tr33337 · 05-12-2009, 04:49 PM

I wish I was that far along and had half your talent. I'm learning a lot in the process so maybe I'll get there someday!

bensimmons_05 · 05-13-2009, 09:46 AM

I like the water you captured in mid air in the photo of the car It adds to the effect. And as far as potential goes.... All I have is a bunch of parts, i wish I could have one picture I could label as "before", ... instead a have a number of pictures of a couple of piles of junk that I have to glue together.

Your truck is lookin great keep posting PICS i love to see em.

kustombrad · 06-24-2009, 06:28 PM

I'm just finishing up a few things on the 'Camino and then I'm back to the truck! Here's an online mag that did a story on my dad's car. Here's the article http://www.stillrunnin.com/magazine/sr6/45-46 The mags' really cool! Brad

ChuckDriver · 06-24-2009, 08:50 PM

Just read your entire build! Very nice work, keep the updates coming!!!

BlueJeep · 06-24-2009, 10:53 PM

Any more info or pics on your wiper system? Thanks!

50adrod · 06-24-2009, 11:36 PM

nice looking welds and fab work

Ben IV · 06-26-2009, 05:31 PM

Truck looks great love the stance. from the start I was hoping you were gonna leave that paint as is and the lettering really sets it off.

kustombrad · 10-01-2009, 01:32 PM

I'm back! Sorry about the delay, but I'm back on track with "Project No Buck$" I delivered the 'Camino to Dad and now I can finish this thing up. The frame

(about 2 hours before it went on the trailer) is at the sand blasters, getting cleaned of 50 odd years of crud. Hopefully this weekend I can paint it and start bolting pieces back on! I know I'm preaching CHEAP, but I'm also trying to do it nice at the same time. I repainted the dash brown and started striping it to make it match the mexican blanket upholstery

I have about another 2 hours and it will be done and then on to other stuff. Everyone has been wondering about the wiper situation. Stay tuned for more info! Brad

kustombrad · 10-01-2009, 03:36 PM

Wheels! I showed at the beginning that I used some cheap Halibrand/ET3 knockoff wheels I got on Ebay. I always loved the way ET3's looked, but didn't want to spend the money (way more) so I figured I'd fake it. I took the wheels over to a machinist friend of mine (after taking the tires back off) and told him I needed the wheels re-drilled for long shank 11/16" lug nuts instead of the tapered ones they come with.

Notice the lug holes... Next I had another machinist friend make some 1/8" aluminum plates for the front and back. The front ones have a 1/2" smaller center hole to fig snugly around the brake rotor so they look a little cleaner

notice the wheel on the right has the plate

Now I just need to add some chrome wheel bearing caps and the fronts are done! The back ones speak for themselves!!!

$100 to drill the wheels, $100 for the aluminum plates and $20 to polish all 4. They look cool and I'm still way cheaper than the big dollar wheels!

**mr48chev** · 10-01-2009, 04:52 PM

You always impress me with how you manage to spend a few extra hours and minimal cash and turn out something that looks like a million bucks. I've preached for years that hours of detail work can quite often match or trump buckets of cash thrown at a project.

kustombrad · 10-01-2009, 06:05 PM

I didn't take any pics of how I put this all together, but thought I should show the finished version. I wanted a stereo in the truck, but wasn't putting it under the seat or cutting a hole in the dash. So this was my idea... I'll build a panel behind it when I'm at that point, but you can see where it's going. I used a 12" hinge I picked up at OSH, took the ashtray back off, glued the front on where it was even with the front of the cover. Ashtray handle opens it. I even used some washers to kick out the bottom of the glovebox, so it was even with the other door. Here you go...

nickp51chevy · 10-01-2009, 06:52 PM

That looks super clean!

IL boy · 10-02-2009, 04:04 PM

That is the coolest dash I have ever seen.

kustombrad · 10-06-2009, 10:35 AM

Anybody have some original gauges converted to 12 volt, they want to sell? Mine are way too tired and 6 volt to boot! I need to keep with the old hot rod theme. Brad

kustombrad · 10-12-2009, 03:43 PM

I'll finish shooting the chassis this week, but I shot a bunch of parts yesterday!

A lot of the smaller stuff is painted and in a box, but the bigger stuff is looking good for a bunch of old crap! I sand blasted everything nice and clean, shot a coat of metal etch primer on them and then sprayed it with some Eastwood ceramic semi-gloss chassis black. They now have a nice egg-shell sheen going on. I need to put the bushings in and hopefully this Sunday (Bakersfield Hot Rod Reunion is on Saturday... Be There!!!!) I'll start assembling the frame. I'm still shooting for Christmas time to be done...

BlueJeep · 10-12-2009, 03:55 PM

Looks good,

but when are we going to get more info on the wipers!

kustombrad · 10-12-2009, 04:05 PM

"The Wipers!" I need to mount them up, just so I can shut you guys up! LOL Anyway, I drew up my pattern on Corel Draw to match the one I'd bent up. I shot it over to a friend of mine to cut it out on his laser and haven't gone by to pick it up yet. I guess I need to get it and mount it up, so everyone has an idea of how this works! Sorry I've taken so long by getting side-tracked on the rest of the truck!!! Brad

BlueJeep · 10-12-2009, 04:16 PM

Yep, we're looking forward to you shutting us up!

Jonboy · 10-12-2009, 11:23 PM

Your truck is trick, Brad. I dig it!

**Dan in Pasadena** · 10-13-2009, 12:08 AM

Man, are you a Jack of All Trades, or what? Designing, Fab skills, welding, pinstriping, painting. Hats off to you for sure.

kustombrad · 10-13-2009, 05:46 PM

My friend Alex had a cool idea of what to use to fill up the old gas tank spout. He said a piston would look *****in' if you could find one that size. So after checking the spout with calipers and doing the metric check (easier to find pistons that way) I came out with 60.5mm. I went to ebay and typed in 62mm so I could make it tight enough not to leak and found a brand new '69 CB750 Honda piston for $19 w/free shipping! Now I need to make a mount that uses the wristpin and that's all done. I'm having way too much fun!

Jonboy · 10-13-2009, 06:20 PM

The piston head would be a cool place for the "soda" opener, too.

05-11-2009, 08:00 PM	#76
kustombrad Registered User Join Date: Nov 2008 Location: So. Cal. Posts: 452	Re: Project "49 No Buck$" Sorry to keep everyone in suspense with the 'Old Brown Truck', but I needed to finish up a few things on a 72 El Camino I did from the frame up for my dad. Only thing I didn't do was the seat upholstery, transmission and rear gears. Way too much work, but it'll be cool for the "world's oldest 15 year old"! (He's 70!) I have about a weeks worth of little things after work and I can get back on my truck. Thought you'd like to see this anyway __________________ It's all about the stance, baby! http://67-72chevytrucks.com/vboard/s...d.php?t=320546 Last edited by kustombrad; 11-07-2009 at 01:42 AM. Reason: changed pics

05-12-2009, 12:00 PM	#77
kustombrad Registered User Join Date: Nov 2008 Location: So. Cal. Posts: 452	Re: Project "49 No Buck$" Just in case anybody with a truck thinks theirs has no potential, this is what I started with in December! Pretty pathetic, huh? __________________ It's all about the stance, baby! http://67-72chevytrucks.com/vboard/s...d.php?t=320546

05-12-2009, 04:13 PM	#78
LOW DOUGH I'M TRUCK CRAZY! Join Date: Oct 2006 Location: Sachse, TEXAS Posts: 1,737	Re: Project "49 No Buck$" yeah.... It was gleaming with potential then. I can see it beaming right off it. Distorting everythig around it. HAHAHAHAHAHAHHA Looks great. Started with a nice looking truck.

05-12-2009, 04:49 PM	#79
av8tr33337 Registered User Join Date: Mar 2009 Location: Derby Kansas Posts: 564	Re: Project "49 No Buck$" I wish I was that far along and had half your talent. I'm learning a lot in the process so maybe I'll get there someday! __________________ av8tr33337 AKA Bartman Email av8tr33337@yahoo.com Bartman's Ad-S10 Chassis Swap http://67-72chevytrucks.com/vboard/s...d.php?t=415418 My First Youtube Video http://www.youtube.com/watch?v=B6hSt...eature=channel More Pics of the 51 Project http://s668.photobucket.com/albums/v...hassis%20Swap/ 1951 3100 Pickup

05-13-2009, 09:46 AM	#80
bensimmons_05 Registered User Join Date: Dec 2007 Location: Jacksonville, AL Posts: 479	Re: Project "49 No Buck$" I like the water you captured in mid air in the photo of the car It adds to the effect. And as far as potential goes.... All I have is a bunch of parts, i wish I could have one picture I could label as "before", ... instead a have a number of pictures of a couple of piles of junk that I have to glue together. Your truck is lookin great keep posting PICS i love to see em. __________________ ---Ben Jammin's 1955 Chevy/GMC Project --- ---The shop's live video feed--- <<< See what I'm up to!

06-24-2009, 06:28 PM	#81
kustombrad Registered User Join Date: Nov 2008 Location: So. Cal. Posts: 452	Re: Project "49 No Buck$" I'm just finishing up a few things on the 'Camino and then I'm back to the truck! Here's an online mag that did a story on my dad's car. Here's the article http://www.stillrunnin.com/magazine/sr6/45-46 The mags' really cool! Brad __________________ It's all about the stance, baby! http://67-72chevytrucks.com/vboard/s...d.php?t=320546

06-24-2009, 08:50 PM	#82
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,629	Re: Project "49 No Buck$" Just read your entire build! Very nice work, keep the updates coming!!! __________________ JJ My 1957 build: http://67-72chevytrucks.com/vboard/s...d.php?t=334552 http://www.trifive.com/forums/showthread.php?t=22037 Instagram - Chuckdriver57

06-24-2009, 10:53 PM	#83
BlueJeep Registered User Join Date: Mar 2008 Location: Waukee, Iowa Posts: 1,608	Re: Project "49 No Buck$" Any more info or pics on your wiper system? Thanks! __________________ build threads: 86 Suburban 88 Jeep 6.0 swap 49 Chevy truck 54 Chevy wagon 86 Suburban lowered 4/6 54 Chevy wagon 49 Chevy/s10 mix 88 Jeep Wrangler rockcrawler

06-24-2009, 11:36 PM	#84
50adrod Registered User Join Date: Jun 2008 Location: Louisiana Posts: 493	Re: Project "49 No Buck$" nice looking welds and fab work __________________ 1971 Corvette convertible 454@ 525 hp 1936 Chevy Truck street rod 1952 Chevy truck hot rod build http://www.killbillet.com/showthread...2-Chevy-Cut-up 1964 F 100 custom street rod http://www.ford-trucks.com/forums/12...mark-viii.html 1950 custom Chevy Truck

06-26-2009, 05:31 PM	#85
Ben IV Registered User Join Date: Dec 2006 Location: Glenpool OK Posts: 255	Re: Project "49 No Buck$" Truck looks great love the stance. from the start I was hoping you were gonna leave that paint as is and the lettering really sets it off. __________________ 70 GMC custom short bed conversion 69 GMC panel truck

10-01-2009, 01:32 PM	#86
kustombrad Registered User Join Date: Nov 2008 Location: So. Cal. Posts: 452	Re: Project "49 No Buck$" I'm back! Sorry about the delay, but I'm back on track with "Project No Buck$" I delivered the 'Camino to Dad and now I can finish this thing up. The frame (about 2 hours before it went on the trailer) is at the sand blasters, getting cleaned of 50 odd years of crud. Hopefully this weekend I can paint it and start bolting pieces back on! I know I'm preaching CHEAP, but I'm also trying to do it nice at the same time. I repainted the dash brown and started striping it to make it match the mexican blanket upholstery I have about another 2 hours and it will be done and then on to other stuff. Everyone has been wondering about the wiper situation. Stay tuned for more info! Brad __________________ It's all about the stance, baby! http://67-72chevytrucks.com/vboard/s...d.php?t=320546 Last edited by kustombrad; 10-01-2009 at 02:12 PM. Reason: adding stuff

10-01-2009, 03:36 PM	#87
kustombrad Registered User Join Date: Nov 2008 Location: So. Cal. Posts: 452	Re: Project "49 No Buck$" Wheels! I showed at the beginning that I used some cheap Halibrand/ET3 knockoff wheels I got on Ebay. I always loved the way ET3's looked, but didn't want to spend the money (way more) so I figured I'd fake it. I took the wheels over to a machinist friend of mine (after taking the tires back off) and told him I needed the wheels re-drilled for long shank 11/16" lug nuts instead of the tapered ones they come with. Notice the lug holes... Next I had another machinist friend make some 1/8" aluminum plates for the front and back. The front ones have a 1/2" smaller center hole to fig snugly around the brake rotor so they look a little cleaner notice the wheel on the right has the plate Now I just need to add some chrome wheel bearing caps and the fronts are done! The back ones speak for themselves!!! $100 to drill the wheels, $100 for the aluminum plates and $20 to polish all 4. They look cool and I'm still way cheaper than the big dollar wheels! __________________ It's all about the stance, baby! http://67-72chevytrucks.com/vboard/s...d.php?t=320546 Last edited by kustombrad; 02-05-2010 at 01:27 PM.

10-01-2009, 04:52 PM	#88
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,639	Re: Project "49 No Buck$" You always impress me with how you manage to spend a few extra hours and minimal cash and turn out something that looks like a million bucks. I've preached for years that hours of detail work can quite often match or trump buckets of cash thrown at a project.

10-01-2009, 06:05 PM	#89
kustombrad Registered User Join Date: Nov 2008 Location: So. Cal. Posts: 452	Re: Project "49 No Buck$" I didn't take any pics of how I put this all together, but thought I should show the finished version. I wanted a stereo in the truck, but wasn't putting it under the seat or cutting a hole in the dash. So this was my idea... I'll build a panel behind it when I'm at that point, but you can see where it's going. I used a 12" hinge I picked up at OSH, took the ashtray back off, glued the front on where it was even with the front of the cover. Ashtray handle opens it. I even used some washers to kick out the bottom of the glovebox, so it was even with the other door. Here you go... __________________ It's all about the stance, baby! http://67-72chevytrucks.com/vboard/s...d.php?t=320546 Last edited by kustombrad; 10-02-2009 at 09:53 PM. Reason: added stuff

10-01-2009, 06:52 PM	#90
nickp51chevy Registered Chevy Owner Join Date: Aug 2008 Location: Snohomish, wa Posts: 1,557	Re: Project "49 No Buck$" That looks super clean! __________________ Love is fleeting, but Chevy trucks are forever!!!! 1970 Chevy CST C10 long box 350/400 2008 Chevy Silverado short box 4x4 Had; 1951 Chevy short box 307/T5 1988 Chevy shot box 4x4 350/350 1971 Chevy C10 long box 4x4 350/350 1971 Chevy C20 long box 350/350 1971 Chevy C10 long box 350/350



Register or Log In To remove these advertisements.

10-02-2009, 04:04 PM	#91
IL boy Registered User Join Date: Jun 2009 Location: Nashville, TN Posts: 54	Re: Project "49 No Buck$" That is the coolest dash I have ever seen. __________________ 55 1st Series 5 window, getting an s10 frame and 350 sbc Keeping it LOUD and ROUGH - just like BOONEMAN

10-06-2009, 10:35 AM	#92
kustombrad Registered User Join Date: Nov 2008 Location: So. Cal. Posts: 452	Re: Project "49 No Buck$" Anybody have some original gauges converted to 12 volt, they want to sell? Mine are way too tired and 6 volt to boot! I need to keep with the old hot rod theme. Brad __________________ It's all about the stance, baby! http://67-72chevytrucks.com/vboard/s...d.php?t=320546 Last edited by kustombrad; 10-06-2009 at 12:52 PM. Reason: needed to fix

10-12-2009, 03:43 PM	#93
kustombrad Registered User Join Date: Nov 2008 Location: So. Cal. Posts: 452	Re: Project "49 No Buck$" I'll finish shooting the chassis this week, but I shot a bunch of parts yesterday! A lot of the smaller stuff is painted and in a box, but the bigger stuff is looking good for a bunch of old crap! I sand blasted everything nice and clean, shot a coat of metal etch primer on them and then sprayed it with some Eastwood ceramic semi-gloss chassis black. They now have a nice egg-shell sheen going on. I need to put the bushings in and hopefully this Sunday (Bakersfield Hot Rod Reunion is on Saturday... Be There!!!!) I'll start assembling the frame. I'm still shooting for Christmas time to be done... __________________ It's all about the stance, baby! http://67-72chevytrucks.com/vboard/s...d.php?t=320546

10-12-2009, 03:55 PM	#94
BlueJeep Registered User Join Date: Mar 2008 Location: Waukee, Iowa Posts: 1,608	Re: Project "49 No Buck$" Looks good, but when are we going to get more info on the wipers! __________________ build threads: 86 Suburban 88 Jeep 6.0 swap 49 Chevy truck 54 Chevy wagon 86 Suburban lowered 4/6 54 Chevy wagon 49 Chevy/s10 mix 88 Jeep Wrangler rockcrawler

10-12-2009, 04:05 PM	#95
kustombrad Registered User Join Date: Nov 2008 Location: So. Cal. Posts: 452	Re: Project "49 No Buck$" "The Wipers!" I need to mount them up, just so I can shut you guys up! LOL Anyway, I drew up my pattern on Corel Draw to match the one I'd bent up. I shot it over to a friend of mine to cut it out on his laser and haven't gone by to pick it up yet. I guess I need to get it and mount it up, so everyone has an idea of how this works! Sorry I've taken so long by getting side-tracked on the rest of the truck!!! Brad __________________ It's all about the stance, baby! http://67-72chevytrucks.com/vboard/s...d.php?t=320546

10-12-2009, 04:16 PM	#96
BlueJeep Registered User Join Date: Mar 2008 Location: Waukee, Iowa Posts: 1,608	Re: Project "49 No Buck$" Yep, we're looking forward to you shutting us up! __________________ build threads: 86 Suburban 88 Jeep 6.0 swap 49 Chevy truck 54 Chevy wagon 86 Suburban lowered 4/6 54 Chevy wagon 49 Chevy/s10 mix 88 Jeep Wrangler rockcrawler

10-12-2009, 11:23 PM	#97
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Project "49 No Buck$" Your truck is trick, Brad. I dig it!

10-13-2009, 12:08 AM	#98
Dan in Pasadena Senior Member Join Date: Nov 2008 Location: Glendora, CA Posts: 6,339	Re: Project "49 No Buck$" Man, are you a Jack of All Trades, or what? Designing, Fab skills, welding, pinstriping, painting. Hats off to you for sure.

10-13-2009, 05:46 PM	#99
kustombrad Registered User Join Date: Nov 2008 Location: So. Cal. Posts: 452	Re: Project "49 No Buck$" My friend Alex had a cool idea of what to use to fill up the old gas tank spout. He said a piston would look *****in' if you could find one that size. So after checking the spout with calipers and doing the metric check (easier to find pistons that way) I came out with 60.5mm. I went to ebay and typed in 62mm so I could make it tight enough not to leak and found a brand new '69 CB750 Honda piston for $19 w/free shipping! Now I need to make a mount that uses the wristpin and that's all done. I'm having way too much fun! __________________ It's all about the stance, baby! http://67-72chevytrucks.com/vboard/s...d.php?t=320546

10-13-2009, 06:20 PM	#100
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Project "49 No Buck$" The piston head would be a cool place for the "soda" opener, too.

Register or Log In To remove these advertisements.