WA Parting '72 1/2ton 2wd Suburban

[frankinstein]

Would you happen to have any of the hardware that holds the spare tire in place.

[DeadheadNM]

Any luck on the defrost vents? Thanks. Pete

[randy500]

Originally Posted by DeadheadNM

Any luck on the defrost vents? Thanks. Pete

I did find a set of green vents, I need to see what I have in total so I have a set for each truck, will check this week

[Klumpo]

Hello looking for the metal plate with two screw holes that divides and retains driver side rear cargo area panels. Thanks. randie110@aol.com

[randy500]

Originally Posted by Klumpo

Hello looking for the metal plate with two screw holes that divides and retains driver side rear cargo area panels. Thanks. randie110@aol.com

I think that's there, I will take a pic and send it to you on Tuesday

[randy500]

Originally Posted by randy500

I think that's there, I will take a pic and send it to you on Tuesday

Picture sent

[juddss]

I am interested in upper trim under right rear window above the right rear tire and the curved one behind it that goes toward the hatch. I am also interested in the lower trim behind the right rear wheel. You can text me if you'd like. 315 430 0414

[randy500]

Originally Posted by juddss

I am interested in upper trim under right rear window above the right rear tire and the curved one behind it that goes toward the hatch. I am also interested in the lower trim behind the right rear wheel. You can text me if you'd like. 315 430 0414

Texted pics and sale pending on these parts.

[ochre1971]

Speedo needle available?

[randy500]

Originally Posted by ochre1971

Speedo needle available?

Not at this time, I need to go through all my gauges and put together a couple nice clusters, If I get that done anytime soon and have a spare I will PM you.

[ryanv70c10]

Looking for the cowl fresh air door which is just above the AC box .

[randy500]

Originally Posted by ryanv70c10

Looking for the cowl fresh air door which is just above the AC box .

At this time I am keeping most of my A/C parts. I will try to remember you asking for this part once I inventory all my A/C parts. I have a lot of A/C parts but I need to see that I have enough for the trucks I am working on.

[ryanv70c10]

Originally Posted by randy500

At this time I am keeping most of my A/C parts. I will try to remember you asking for this part once I inventory all my A/C parts. I have a lot of A/C parts but I need to see that I have enough for the trucks I am working on.

OK let me know please. Thx

[frankinstein]

Following up to see if you had any of the hardware to mount the spare tire. And wanted to make sure you received the pay pal funds on the 2 headliner bows.

[randy500]

Originally Posted by frankinstein

Following up to see if you had any of the hardware to mount the spare tire. And wanted to make sure you received the pay pal funds on the 2 headliner bows.

There is no hardware for the spare tire. Yes I got the funds, I decided to take a last minute xmas vacation, I will get your bows shipped today, sorry for the delay.

[CG]

For some reason I was thinking this was a 3/4 ton. I didn't read all the pages, is the chassis available, if so is it a roller? If so what would you want for it?

[randy500]

Originally Posted by CG

For some reason I was thinking this was a 3/4 ton. I didn't read all the pages, is the chassis available, if so is it a roller? If so what would you want for it?

The chassis is still complete. I am using the 2nd body mounts from the frame.

I have a deal working now for rear frame horns and 3rd body mounts, he hasn't paid yet.

I figure the rolling chassis is worth about $500, which is what I will eventually get for the frame cuts, cross members, rear end and disc brake front end. I have a signed off WA title to go with it.

[CG]

Ok sounds good. More than I want to spend though. I have a 72 4x4 project burb ill be putting up for sale in a couple months. I was just thinking if I can't get what I want for it a two wheel drive chassis would be nice to have if I ended up keeping it

[randy500]

Originally Posted by CG

Ok sounds good. More than I want to spend though. I have a 72 4x4 project burb ill be putting up for sale in a couple months. I was just thinking if I can't get what I want for it a two wheel drive chassis would be nice to have if I ended up keeping it

What are you gonna be asking for the project Burb? 1/2 or 3/4 ton?

[CG]

It's half ton now but was originally 3/4. Not sure yet on price ... going to need to add everything up I want to let go with it. Once title is here in my name ill get to figuring

At least 2500 so far

[1fast10]

If your cutting the body up im. In need of the inner roof for driver and passenger doors. Basically area right below the headliner lip to door seal. And the b pillar

[randy500]

Originally Posted by 1fast10

If your cutting the body up im. In need of the inner roof for driver and passenger doors. Basically area right below the headliner lip to door seal. And the b pillar

I can get you those parts, I need to know exactly how much of that you need. I will cut them out with a spotweld cutter at the door seal and a cutoff wheel on the ends. Can you pay $100 for those plus whatever shipping is? Cutting those out for reinstall Is time consuming and eats up supplies
I need the B pillar floor to top door edge for my build.

[FL71C10]

Do you have a parking brake pedal assembly?

[randy500]

Originally Posted by FL71C10

Do you have a parking brake pedal assembly?

Yes, I can get that to your for $42 shipped. There is a link in my signature line to my paypal, put a note in there of what your paying for.

[FL71C10]

Originally Posted by FL71C10

Do you have a parking brake pedal assembly?

I won't need that after all. I went through mine and got it working. Thanks, though.