The '67 Burb Build Thread - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*project 67 sub* · 11-16-2009, 07:51 PM

i dont know im not sure, but they probably do move at least a little. this set has been cut for over a year, i just cut more off to go lower. the other set i had on their when i got it that i cut were cut for over a year as well. i have drove it on the freeway quite a bit with cut springs and was never nervous about it. i have only drove it around the block since its been this low in the back, so we will see how it rides, drives, and reacts to it being this low.

*project 67 sub* · 12-12-2009, 02:38 PM

the pics are a little bit blurry as i took them in crappy lighting with my camera phone but here is the inside the back of my truck where the floor and wheel tubs used to be. got some exhaust work done as well.
Name: Untitled.jpg
Views: 1731
Size: 41.2 KB

Name: Untitled.jpg
Views: 1731
Size: 41.2 KB

Name: Untitled1.jpg
Views: 1747
Size: 45.0 KB

*project 67 sub* · 12-13-2009, 01:30 AM

heres some old pics of the motor that magically vanished from my thread.
Name: l_69409d3ca69a334ab9fc14c76bbe72d1.jpg
Views: 1535
Size: 46.3 KB

Name: l_4284aacd578ab339147af7a6a99ff497.jpg
Views: 1536
Size: 45.3 KB

*Puropedo* · 12-13-2009, 07:16 PM

Burb is looking good!,, Im not a fan of caddy tail lights but still look good..

63chevyll · 01-01-2010, 06:44 PM

man, i have a recent hard on for 67-72 burbs and crew cabs, nice one

*project 67 sub* · 01-09-2010, 11:37 PM

and my new SD wheel tubs, still gotta paint them and under coat them but here they are, and just held in place with a couple sheet metal screws for now.
Name: l_4815406c5220486ea8c0102ae75b88fc.jpg
Views: 1440
Size: 33.4 KB

Name: l_4815406c5220486ea8c0102ae75b88fc.jpg
Views: 1440
Size: 33.4 KB

Name: l_4c92cfbc7d45450db3668a6d2109f47e.jpg
Views: 1413
Size: 26.5 KB

Name: l_2a2dc787f0514ecabd0049ab14d2ca56.jpg
Views: 1425
Size: 23.3 KB

Name: l_41097ac05e0f480ca9e1b1aafe0de414.jpg
Views: 1422
Size: 35.5 KB

Name: l_ac9b107cfc71487f9b037d3fd0b9de6b.jpg
Views: 1409
Size: 32.0 KB

**kev2809** · 01-10-2010, 01:53 PM

coming along nicely...you getting the bag stuff ready?

i been meaning to ask you...what did you do to cut your floor and stock tubs out? i been working on mine all week (scattered about) and i have been grinding the head of the bolts off and punching them through with a hammer and screwdriver...got a few more to go still. and i havent tried cutting the tubs out...what did you use to cut them out?

*project 67 sub* · 01-10-2010, 02:38 PM

thanks, i try lol. no not yet, no money for that but soon hopefully lol. and i used a combination of things over time as i was removing the floor and wheel tubs. i used a grinder, a saws-all, an air cutter, and a couple of hand tools.

*project 67 sub* · 01-10-2010, 10:48 PM

a few more shots, now with the rear wheels all black. will get some more pics tomorrow of the tubs and rear frame painted up.

edit: dont mind the illegal parking lol, it was only for a couple minutes and in front of my house.

Name: l_fb352e3d4bc948eb8c1a6c689eb3d070.jpg
Views: 1407
Size: 29.7 KB

Name: l_fb352e3d4bc948eb8c1a6c689eb3d070.jpg
Views: 1407
Size: 29.7 KB

Name: l_d57eac4427af4ae6b992bb4052ab8ae5.jpg
Views: 1425
Size: 27.9 KB

*project 67 sub* · 01-12-2010, 10:47 PM

frame and wheel tubs painted black and undercoated
Name: l_3371646ec0fa4ea5b2edaadb5857152a.jpg
Views: 1370
Size: 32.2 KB

Name: l_05ad4f30143c48f582321a76f0f6c7ef.jpg
Views: 1363
Size: 29.2 KB

Name: l_963520e35ffe4f75b781f1428689fab2.jpg
Views: 1360
Size: 31.6 KB

*project 67 sub* · 01-19-2010, 01:10 AM

here's some Cali black and yellow plates im working on that i will be using one way or another lol. one was pretty horrible(the top half all bent up and stuff) when i got them, the other wasnt to bad. didnt take before and during pics but here they are in primer, they still need some more sanding to finish smoothing out and then i can start painting them the colors they are supposed to be. they are not going to be perfect but good enough for me lol
Name: nxutdrmxt.jpg
Views: 1314
Size: 37.0 KB

Name: nxutdrmxt.jpg
Views: 1314
Size: 37.0 KB

Name: u5d6rhjrd5h.jpg
Views: 1292
Size: 40.6 KB

Name: yhsrjyrnr.jpg
Views: 1300
Size: 47.0 KB

.

**KevsClassics** · 06-30-2010, 09:34 PM

How did the plates turn out?

*project 67 sub* · 07-01-2010, 02:40 AM

never finished them, damn satin black spray paint wrinkled up on them lol. so they have been sitting in a box in my room for a while. eventually i'll pull them back out and try redoing them again.

**KevsClassics** · 07-01-2010, 10:55 PM

Bring them to the show. You will see the plate resto C/10King's wife does.

*project 67 sub* · 07-03-2010, 01:13 AM

not much of an update guys but heres a few things that have been done
some bucket seats out of a 2006 suzuki forenza i put in
Name: l_8ef8a699ab96448fb1297274474d6eb6.jpg
Views: 1250
Size: 28.0 KB

Name: l_8ef8a699ab96448fb1297274474d6eb6.jpg
Views: 1250
Size: 28.0 KB

some stainless steel shorty haeders i installed
Name: l_202f4dd800ed4b23995695952cfdcdd0.jpg
Views: 1196
Size: 36.7 KB

not the newest and most current pics but it doesnt look any different
Name: l_62fec73db7c04a96a7bacf3992a1e38d.jpg
Views: 1190
Size: 37.1 KB

Name: l_f43773b0e1e3428696488f6a0c74c9a4.jpg
Views: 1200
Size: 22.4 KB

*project 67 sub* · 07-03-2010, 01:17 AM

decided not to use these

*project 67 sub* · 07-03-2010, 01:19 AM

decided not to use these

*project 67 sub* · 07-03-2010, 01:28 AM

also got some exhaust work done but no pics of that, its 2.5" true duals all the way out the back with flowmasters that were already on it.

oh! and i also tunneled the floor for rear driveshaft clearence, and im working on a bolt in rear bag set up for between the frame rails just behind the back seat

JesseH13 · 07-12-2010, 10:45 PM

Its coming along man ill subscribe to your thread i like what your doin already.

**kev2809** · 07-12-2010, 10:52 PM

man its super low for a static drop. whats the bag setup gonna be? (wondering if it would get any lower lol)

*project 67 sub* · 07-14-2010, 03:59 PM

Quote:

Originally Posted by JesseH13

Its coming along man ill subscribe to your thread i like what your doin already.

thanks

*project 67 sub* · 07-14-2010, 04:04 PM

Quote:

Originally Posted by kev2809

man its super low for a static drop. whats the bag setup gonna be? (wondering if it would get any lower lol)

heres the set up. it was just something kind of quick, need to address a few issues with it still. yah it will lay the rear quarter panel behind the tire on the ground, but thats only cause the front is up so high.
Name: l_65ac1d3b42d4465e8fb8a9abcbe4483b.jpg
Views: 1157
Size: 38.1 KB

Name: l_65ac1d3b42d4465e8fb8a9abcbe4483b.jpg
Views: 1157
Size: 38.1 KB

Name: l_63b706a6e6e54771b7849166ef4848b2.jpg
Views: 1163
Size: 41.2 KB

OARNGESI · 09-30-2010, 03:44 AM

Really looking good i really like the control arms

*project 67 sub* · 09-30-2010, 04:20 AM

haha thanks, yah they are beefy as hell to . done up by a buddy/lowrider guy built for hoping so they should never bend. the only thing i had him do that was a little to much is stretching them an 1" 3/8's. should have only went 1" instead as i have some positive camber at that front ride height lol. and thats with almost no shims.

*project 67 sub* · 11-18-2010, 05:45 AM

Name: 10-28-10_1814.jpg
Views: 995
Size: 29.6 KB

aired up next to my buddys aired out burb
Name: 10-29-10_1226.jpg
Views: 1029
Size: 25.5 KB

Name: 10-29-10_1228.jpg
Views: 990
Size: 21.4 KB

aired up

Name: 10-29-10_1233.jpg
Views: 1049
Size: 23.6 KB

another pic of rear bag setup, still needs some more bracing to fully eliminate the trailing arm twisting
Name: 10-29-10_1250.jpg
Views: 1174
Size: 30.6 KB

Name: 10-29-10_1250.jpg
Views: 1174
Size: 30.6 KB

11-16-2009, 07:51 PM	#76
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread i dont know im not sure, but they probably do move at least a little. this set has been cut for over a year, i just cut more off to go lower. the other set i had on their when i got it that i cut were cut for over a year as well. i have drove it on the freeway quite a bit with cut springs and was never nervous about it. i have only drove it around the block since its been this low in the back, so we will see how it rides, drives, and reacts to it being this low.

12-12-2009, 02:38 PM	#77
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread the pics are a little bit blurry as i took them in crappy lighting with my camera phone but here is the inside the back of my truck where the floor and wheel tubs used to be. got some exhaust work done as well. Last edited by project 67 sub; 12-12-2009 at 02:39 PM.

12-13-2009, 01:30 AM	#78
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread heres some old pics of the motor that magically vanished from my thread.

12-13-2009, 07:16 PM	#79
Puropedo Account Suspended Join Date: Nov 2008 Location: Prunedale California Posts: 782	Re: The '67 Burb Build Thread Burb is looking good!,, Im not a fan of caddy tail lights but still look good..

01-01-2010, 06:44 PM	#80
63chevyll gets board easy....... Join Date: Mar 2009 Location: Colorado Springs Posts: 717	Re: The '67 Burb Build Thread man, i have a recent hard on for 67-72 burbs and crew cabs, nice one Last edited by 63chevyll; 01-01-2010 at 06:45 PM.

01-09-2010, 11:37 PM	#81
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread and my new SD wheel tubs, still gotta paint them and under coat them but here they are, and just held in place with a couple sheet metal screws for now.

01-10-2010, 01:53 PM	#82
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: The '67 Burb Build Thread coming along nicely...you getting the bag stuff ready? i been meaning to ask you...what did you do to cut your floor and stock tubs out? i been working on mine all week (scattered about) and i have been grinding the head of the bolts off and punching them through with a hammer and screwdriver...got a few more to go still. and i havent tried cutting the tubs out...what did you use to cut them out? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

01-10-2010, 02:38 PM	#83
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread thanks, i try lol. no not yet, no money for that but soon hopefully lol. and i used a combination of things over time as i was removing the floor and wheel tubs. i used a grinder, a saws-all, an air cutter, and a couple of hand tools. Last edited by project 67 sub; 01-10-2010 at 02:39 PM.

01-10-2010, 10:48 PM	#84
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread a few more shots, now with the rear wheels all black. will get some more pics tomorrow of the tubs and rear frame painted up. edit: dont mind the illegal parking lol, it was only for a couple minutes and in front of my house. Last edited by project 67 sub; 01-10-2010 at 10:49 PM.

01-12-2010, 10:47 PM	#85
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread frame and wheel tubs painted black and undercoated

01-19-2010, 01:10 AM	#86
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread here's some Cali black and yellow plates im working on that i will be using one way or another lol. one was pretty horrible(the top half all bent up and stuff) when i got them, the other wasnt to bad. didnt take before and during pics but here they are in primer, they still need some more sanding to finish smoothing out and then i can start painting them the colors they are supposed to be. they are not going to be perfect but good enough for me lol .

06-30-2010, 09:34 PM	#87
KevsClassics TILT COLUMN GURU Join Date: Dec 2006 Location: FRESNO CA Posts: 4,276	Re: The '67 Burb Build Thread How did the plates turn out? __________________ Instagram kevs_classics64 64 Impala SS Conv 72 Blazer 2wd 75 Jimmy 2wd 63 Belair wagon 02 Silverado ext cab. DD RIP EL JAY

07-01-2010, 02:40 AM	#88
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread never finished them, damn satin black spray paint wrinkled up on them lol. so they have been sitting in a box in my room for a while. eventually i'll pull them back out and try redoing them again.

07-01-2010, 10:55 PM	#89
KevsClassics TILT COLUMN GURU Join Date: Dec 2006 Location: FRESNO CA Posts: 4,276	Re: The '67 Burb Build Thread Bring them to the show. You will see the plate resto C/10King's wife does. __________________ Instagram kevs_classics64 64 Impala SS Conv 72 Blazer 2wd 75 Jimmy 2wd 63 Belair wagon 02 Silverado ext cab. DD RIP EL JAY

07-03-2010, 01:13 AM	#90
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread not much of an update guys but heres a few things that have been done some bucket seats out of a 2006 suzuki forenza i put in some stainless steel shorty haeders i installed not the newest and most current pics but it doesnt look any different



Register or Log In To remove these advertisements.

07-03-2010, 01:17 AM	#91
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread decided not to use these Attached Images Last edited by project 67 sub; 03-13-2011 at 08:28 PM.

07-03-2010, 01:19 AM	#92
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread decided not to use these Attached Images Last edited by project 67 sub; 03-13-2011 at 08:29 PM.

07-03-2010, 01:28 AM	#93
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread also got some exhaust work done but no pics of that, its 2.5" true duals all the way out the back with flowmasters that were already on it. oh! and i also tunneled the floor for rear driveshaft clearence, and im working on a bolt in rear bag set up for between the frame rails just behind the back seat Last edited by project 67 sub; 07-03-2010 at 01:33 AM.

07-12-2010, 10:45 PM	#94
JesseH13 AMBITION Join Date: Nov 2009 Location: Fresno Ca Posts: 389	Re: The '67 Burb Build Thread Its coming along man ill subscribe to your thread i like what your doin already. __________________ 1979 Nova-daily-R.I.P 1976 c10 "daily"- 1968 c10 -project CROOKED68 (PROJECT)

07-12-2010, 10:52 PM	#95
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: The '67 Burb Build Thread man its super low for a static drop. whats the bag setup gonna be? (wondering if it would get any lower lol) __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

09-30-2010, 03:44 AM	#98
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: The '67 Burb Build Thread Really looking good i really like the control arms __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

09-30-2010, 04:20 AM	#99
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread haha thanks, yah they are beefy as hell to . done up by a buddy/lowrider guy built for hoping so they should never bend. the only thing i had him do that was a little to much is stretching them an 1" 3/8's. should have only went 1" instead as i have some positive camber at that front ride height lol. and thats with almost no shims. Last edited by project 67 sub; 09-30-2010 at 04:20 AM.

11-18-2010, 05:45 AM	#100
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread aired up next to my buddys aired out burb aired up another pic of rear bag setup, still needs some more bracing to fully eliminate the trailing arm twisting Last edited by project 67 sub; 11-18-2010 at 05:54 AM.

Register or Log In To remove these advertisements.