MN Parting a 1972 Sierra Grande!!!!!! - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 01-07-2012, 12:06 PM

Yes he had a aluminum with woodgrain

Rodk65 · 01-07-2012, 01:50 PM

Hello Jud. I Found a set of seat belts from another source so I will pass on these. Thanks.

Vintage Windmills · 01-07-2012, 06:18 PM

No problem passing on things guys, I do appreciate you letting me know.

**allchevy58** · 01-08-2012, 01:45 AM

Quote:

Originally Posted by Vintage Windmills

Needs rubber seal. Chrome is fantastastic though. $50 shipped. I don't have the driver door trim but I think its the same as passenger door. This one is amazing shape so $40 shipped. Rear bed pieces have some minor bends. 25 shipped for those 2 or $49 shipped for all three.

Been a very mild winter here so far! This is nothing!

Rusted through both sides down low. Inner fenders too in same spot.

Let me get them out. I think the grille isn't worth shipping. I don't think you'd be happy with it, my 1st impression of it was that it was scrap. Chrome is gone in spots and dinged up.

I do encourage offers but we're too far apart, sorry.

Did you get the headliner trim retainers out yet? Haven't seen a reply. Thanks.

Vintage Windmills · 01-08-2012, 07:08 PM

Quote:

Originally Posted by allchevy58

Did you get the headliner trim retainers out yet? Haven't seen a reply. Thanks.

Just got a bunch of stuff removed including these. Three are good. They are part of the strip they are attached to but i think they'd snap off.

$8 shipped if I can cut the strips near the retainers so they fit in a small package.

Vintage Windmills · 01-08-2012, 07:12 PM

Belts and 2-3 core upper brackets.

$50 shipped on belts. all three sets (6 belts total) but a couple have some damage. Covers on retractors are nice, one retractor is weak. GM emblems are nicer than they look below, there is glare in the pics of them.

Brackets $10 shipped

Ambers $6 or free if you buy something else and can use them.

Vintage Windmills · 01-08-2012, 07:25 PM

Fan shroud has no cracks but some damage from fan at bottom. Not really visible once installed and still plenty of material left there.

$25+shipping

**allchevy58** · 01-08-2012, 09:08 PM

Quote:

Originally Posted by Vintage Windmills

Just got a bunch of stuff removed including these. Three are good. They are part of the strip they are attached to but i think they'd snap off.

$8 shipped if I can cut the strips near the retainers so they fit in a small package.

I'll pass, went and looked at mine, didn't realize they were part of the trim. Thought retainers sat over trim where they met. Sorry

**DeadheadNM** · 01-08-2012, 09:13 PM

Jud - How'd you make out with the windshield trim/gasket? Thanks, Pete

Vintage Windmills · 01-08-2012, 11:38 PM

Quote:

Originally Posted by allchevy58

I'll pass, went and looked at mine, didn't realize they were part of the trim. Thought retainers sat over trim where they met. Sorry

If you have a bad one or two, you've got nothing to lose so maybe see if they will snap off. If so you could snap these off and be in business?

Vintage Windmills · 01-08-2012, 11:50 PM

Pete,

Sorry, ran out of time and energy today....hopefully in a couple days

**DeadheadNM** · 01-09-2012, 12:02 AM

Quote:

Originally Posted by Vintage Windmills

Pete,

Sorry, ran out of time and energy today....hopefully in a couple days

No rush! Thanks.

**allchevy58** · 01-09-2012, 12:26 AM

Quote:

Originally Posted by Vintage Windmills

If you have a bad one or two, you've got nothing to lose so maybe see if they will snap off. If so you could snap these off and be in business?

That's true, PM me with payment method. I do have a Paypal acct. Thanks

**tll74** · 01-09-2012, 03:24 AM

Do you still have the headliner? condition? How much of the nice lower trim is still available?

Vintage Windmills · 01-09-2012, 11:13 AM

Quote:

Originally Posted by tll74

Do you still have the headliner? condition? How much of the nice lower trim is still available?

All trim in last set of pics above is still available plus the right front by bumper but i need to remove it tonight. Rear of bed both sides is okay driver. Rest of right side is excellent driver or better. Right door is close to NOS condition. Rest of left side is good driver.

theboxer · 01-09-2012, 11:32 AM

How much for the door screws and inserts under the vent window?

Vintage Windmills · 01-09-2012, 12:14 PM

Quote:

Originally Posted by theboxer

How much for the door screws and inserts under the vent window?

What do you mean by insert?

**tll74** · 01-09-2012, 05:20 PM

Thanks for the info on trim. How much for all the NICE trim? Any word on the headliner?

theboxer · 01-09-2012, 07:47 PM

I think there are inserts that are flared under the screws. If not how much for the screws?

Vintage Windmills · 01-09-2012, 09:48 PM

Quote:

Originally Posted by tll74

Thanks for the info on trim. How much for all the NICE trim? Any word on the headliner?

Nice trim would be one bill shipped for the 4 best pieces of lower (rt side door, bed front, and fender front and rear). This stuff is nice, i will use for a future restoration if it doesn't sell.

No shipping on headliner due to size/cost.

Vintage Windmills · 01-09-2012, 09:52 PM

Quote:

Originally Posted by theboxer

I think there are inserts that are flared under the screws. If not how much for the screws?

$4 shipped, I get now what you mean by inserts. I will include if they're there.

**allchevy58** · 01-10-2012, 12:48 AM

Quote:

Originally Posted by Vintage Windmills

Just got a bunch of stuff removed including these. Three are good. They are part of the strip they are attached to but i think they'd snap off.

$8 shipped if I can cut the strips near the retainers so they fit in a small package.

Payment sent. Thank You

theboxer · 01-10-2012, 10:21 AM

Send me you payment data and I will submit payment via paypal.

Vintage Windmills · 01-11-2012, 02:52 PM

Quote:

Originally Posted by theboxer

Send me you payment data and I will submit payment via paypal.

Got it thanks!

**tll74** · 01-11-2012, 11:29 PM

I'll take the NICE trim for a bill. PM payment info. Thanks, Tom

01-07-2012, 12:06 PM	#76
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 1972 Sierra Grande!!!!!! Yes he had a aluminum with woodgrain __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-07-2012, 01:50 PM	#77
Rodk65 Registered User Join Date: Apr 2010 Location: Holmen, WI Posts: 212	Re: Parting a 1972 Sierra Grande!!!!!! Hello Jud. I Found a set of seat belts from another source so I will pass on these. Thanks. __________________ ROD 1969 K10 4x4 Short Fleet. Tuned Port Injection 350/700R4, Cruise, tilt and factory A/C. 1971 C20 Camper Special. 350/350. SOLD 2002 Chevy Tahoe LT

01-07-2012, 06:18 PM	#78
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Parting a 1972 Sierra Grande!!!!!! No problem passing on things guys, I do appreciate you letting me know. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

01-08-2012, 07:12 PM	#81
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Parting a 1972 Sierra Grande!!!!!! Belts and 2-3 core upper brackets. $50 shipped on belts. all three sets (6 belts total) but a couple have some damage. Covers on retractors are nice, one retractor is weak. GM emblems are nicer than they look below, there is glare in the pics of them. Brackets $10 shipped Ambers $6 or free if you buy something else and can use them. Attached Images __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6 Last edited by Vintage Windmills; 01-08-2012 at 07:22 PM.

01-08-2012, 07:25 PM	#82
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Parting a 1972 Sierra Grande!!!!!! Fan shroud has no cracks but some damage from fan at bottom. Not really visible once installed and still plenty of material left there. $25+shipping Attached Images __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

01-08-2012, 09:13 PM	#84
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,372	Re: Parting a 1972 Sierra Grande!!!!!! Jud - How'd you make out with the windshield trim/gasket? Thanks, Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

01-08-2012, 11:50 PM	#86
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Parting a 1972 Sierra Grande!!!!!! Pete, Sorry, ran out of time and energy today....hopefully in a couple days __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

01-09-2012, 03:24 AM	#89
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting a 1972 Sierra Grande!!!!!! Do you still have the headliner? condition? How much of the nice lower trim is still available? __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

01-09-2012, 11:32 AM	#91
theboxer Registered User Join Date: Dec 2006 Location: North Carolina Posts: 43	Re: Parting a 1972 Sierra Grande!!!!!! How much for the door screws and inserts under the vent window?

01-09-2012, 05:20 PM	#93
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting a 1972 Sierra Grande!!!!!! Thanks for the info on trim. How much for all the NICE trim? Any word on the headliner? __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

01-09-2012, 07:47 PM	#94
theboxer Registered User Join Date: Dec 2006 Location: North Carolina Posts: 43	Re: Parting a 1972 Sierra Grande!!!!!! I think there are inserts that are flared under the screws. If not how much for the screws?

01-10-2012, 10:21 AM	#98
theboxer Registered User Join Date: Dec 2006 Location: North Carolina Posts: 43	Re: Parting a 1972 Sierra Grande!!!!!! Send me you payment data and I will submit payment via paypal.

01-11-2012, 11:29 PM	#100
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting a 1972 Sierra Grande!!!!!! I'll take the NICE trim for a bill. PM payment info. Thanks, Tom __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.