|
03-10-2010, 01:55 PM | #1 |
Senior Member
Join Date: May 2002
Location: hamilton,ohio,usa
Posts: 1,499
|
Re: pls post pixs of 67-72 Panels
Hey, Is there any way we could get the pictures from way back , that have been posted and bring them up to here?
__________________
Broken Back Club 72 Club GMC Club Panel truck Club 6 cylinder Club Unfinished Projects Club Outdoor Sportsmens Club |
03-21-2010, 03:28 PM | #2 |
Registered User
Join Date: Aug 2008
Location: Brentwood Bay, BC
Posts: 252
|
Re: pls post pixs of 67-72 Panels
I hope crewcab67 doesn't mind but I thought it would be good to include his dad's panel pics here....these were posted asking WIW.
here is his description of the truck, "it has a 67 front end all the door handels and side lights have been shaved, all the rust has been cut out and welded back with pach panels. It has PS, PDB, 5 lug, tack, tilt, 3" lowerd springs all the way around, C-noched over the rear end, all new tinted glass, new door rubbers, 400 SB runs good, TH350. It has all new interior in it." Last edited by robb67; 03-21-2010 at 03:30 PM. Reason: added truck description |
07-26-2010, 01:38 PM | #3 |
Registered User
Join Date: Aug 2008
Location: Brentwood Bay, BC
Posts: 252
|
Re: pls post pixs of 67-72 Panels
I've been meaning to get an updated pic with the new rims for a while now. I got the rims from board member "MYGMCANDME" and had them blasted, painted and bought new centre caps. This is the pic I should of posted for the current TOTM contest.
|
06-27-2011, 01:29 PM | #4 | |
Registered User
Join Date: Feb 2011
Location: Sedro Woolley, wa
Posts: 23
|
Re: pls post pixs of 67-72 Panels
Quote:
Last edited by afmdmc; 06-27-2011 at 02:03 PM. |
|
06-27-2011, 03:16 PM | #5 |
Registered User
Join Date: Aug 2008
Location: Brentwood Bay, BC
Posts: 252
|
Re: pls post pixs of 67-72 Panels
Congrats on getting this Panel, it looks sweet. I would like to see your interior whenever you get some pics.
Cheers! Rob |
07-26-2010, 02:27 PM | #6 |
Its always something!
Join Date: Aug 2005
Location: FT Worth,TX
Posts: 4,992
|
Re: pls post pixs of 67-72 Panels
Heres my 69
__________________
79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f*** short fleet 63 C 60 Flatbed Member of the patina club |
07-26-2010, 02:52 PM | #7 |
Registered User
Join Date: Aug 2008
Location: Brentwood Bay, BC
Posts: 252
|
Re: pls post pixs of 67-72 Panels
I love that TX patina, nice panel.....
|
08-13-2010, 09:29 PM | #8 |
Account Suspended
Join Date: May 2004
Location: Simi Valley, CA
Posts: 1,387
|
Re: pls post pixs of 67-72 Panels
Here are a few recent pics of mine
|
10-24-2010, 10:40 PM | #9 |
Registered User
Join Date: Mar 2004
Location: Hoytsville, Utah
Posts: 3,365
|
Re: pls post pixs of 67-72 Panels
I haven't checked in with my Panel Brothers lately. I've been pretty busy all summer with work and haven't had a lot of time for my Panel, except saving money for a drive train. And now I have a shiny new Bowtie Overdrive's 200R and a greasy old 292 and fresh motivation. I get more done in the winter, anyway. I'll be getting that motor tore down and off to the machine shop in the next couple months and hopefully have a clear direction for it's re-build. I really, really want to supercharge it, so I will build it with that in mind. I just need to educate myself on what it's gonna take. I want reliability above all, with power and a heavy dose of cool.
__________________
'68 Panel Project Boogie Chillin' '68 C-10 Ol' Green |
01-14-2011, 07:31 AM | #10 |
Registered User
Join Date: Oct 2007
Location: Wilsonville Or
Posts: 705
|
Re: pls post pixs of 67-72 Panels
jgb7038's panel -
|
01-15-2021, 02:36 PM | #11 |
Registered User
Join Date: Jan 2021
Location: PRINCETON,TX.
Posts: 23
|
Re: pls post pixs of 67-72 Panels
Sweet!!!!!!
|
01-16-2021, 04:44 PM | #12 |
How did I get this OLD!
Join Date: Dec 2014
Location: Lamont County, AB, CANADA
Posts: 1,047
|
Re: pls post pixs of 67-72 Panels
I bought this 67 4x4 1/2 ton Panel in March of 2020. Plans are to rebuild it into a stock high option Panel. So far I have collected a very nice OE 67 front clip and all the aftermarket repair panels to do the body. I have a set of buddies and all the chrome to make it into a "CST" or "Custom" option truck. The 70 GMC Automatic Panel will donate what it can. I have a real nice set of 67 doors but they are for a pick up. I'm not sure how easy it would be to switch the window frames. I think I want to make it a 5 speed with the NV4500 but also have a 700R4 with a 208. Who knows, just dreaming at this stage. For now the plans are to keep it the dark green with a white roof and marker lights. We all know how things get side tracked or changed once the build begins.
Michael http://67-72chevytrucks.com/vboard/a...1&d=1610828493
__________________
1967 Oshawa built LWB Fleetside. 327,3 OTT, 515 Vermilion, CST, PS, PB, Shoulder Harness, Tach,Vac, Speed Warning, Choke Delete, Manual Throttle, Fawn interior. Dealer installed A/C 04/2015, N34 Rosewood Wheel 06/2023 Members who I have met personally. Metaldoc, chevnkevin, 62 Longbed, 72LHorn, 72MARIO, YBNORML, TBONE1964, Classic Bowties, Chevemall, Dagnabbitt. |
01-14-2011, 04:34 PM | #13 |
Registered User
Join Date: Oct 2007
Location: Wilsonville Or
Posts: 705
|
Re: pls post pixs of 67-72 Panels
Just a few pics I have...
|
01-14-2011, 04:36 PM | #14 |
Registered User
Join Date: Oct 2007
Location: Wilsonville Or
Posts: 705
|
Re: pls post pixs of 67-72 Panels
|
01-14-2011, 04:37 PM | #15 |
Registered User
Join Date: Oct 2007
Location: Wilsonville Or
Posts: 705
|
Re: pls post pixs of 67-72 Panels
More...
|
01-14-2011, 04:39 PM | #16 |
Registered User
Join Date: Oct 2007
Location: Wilsonville Or
Posts: 705
|
Re: pls post pixs of 67-72 Panels
...and more.
|
01-14-2011, 04:45 PM | #17 |
Registered User
Join Date: Oct 2007
Location: Wilsonville Or
Posts: 705
|
Re: pls post pixs of 67-72 Panels
When I see them I save the pics, damn these are RARE! Pre '67 all day long, '67-'72 nope! Anyway... I have some pics of 4wd versions somewhere, I'll see if I can find them. The 3rd and 4th pic are the same vehicle by the way.
Last edited by Mkcustums; 01-14-2011 at 04:47 PM. |
01-14-2011, 05:37 PM | #18 |
Registered User
Join Date: Dec 2010
Location: Burleson, Texas
Posts: 596
|
Re: pls post pixs of 67-72 Panels
SWEET! I want one!!!
How big is the door opening?? Wonder if my Harley would fit????
__________________
Allengator Outta the Blue (my band - available for hire in the DFW area!) 1980 Chevy SWB Pickup (build thread) 1951 Chevy Sedan Delivery 2004 Chevy Tahoe Z71 2011 Harley Davidson Street Glide 2018 Silverado Z71 Crew Cab Last edited by allengator; 01-14-2011 at 05:38 PM. |
01-14-2011, 05:53 PM | #19 |
Account Suspended
Join Date: Mar 2007
Location: san bernardino ca. everywhere
Posts: 3,938
|
Re: pls post pixs of 67-72 Panels
dont think a harley will fit unless it has drag bars, but even then it might not. i had a 2007 yfz 450 quad and it would not fit in the back of my burb
|
01-17-2011, 09:02 PM | #20 |
Registered User
Join Date: Aug 2008
Location: greensboro nc
Posts: 684
|
Re: pls post pixs of 67-72 Panels
Man some of you fellows make me fell like Im starting with real gem.Unfortunately there is lots of shoty body work that been done that will have to be cut out and replaced before I can start the fun stuff like custom interior and slight hop up of the Big block. Ive included the only pic I have at present of the truck its 1969 1/2 ton that has only had two previuos owners and granfather was first one and he bought it back from the guy he sold it to. So I guess Im third owner.Anyway its back in the family and ready for seriuos makeover.
|
01-17-2011, 11:50 PM | #21 |
member
Join Date: Dec 2003
Location: Silver Spring Md.20901
Posts: 2,031
|
Re: pls post pixs of 67-72 Panels
Hey! I purchased the 67 panel pictured on the trailor! It is now sitting on a 72 4wd suburban frame with new front clip,new crate engine with new built 700r4, radiator,newly covered bucket seats , new marine plywood floor,new bumpers with bumperettes,tow hooks and new interior so far. From the front fenders back it still has the same body, but a work in progress!
John
__________________
1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide Last edited by olblue60@aol.com; 01-17-2011 at 11:51 PM. |
01-31-2011, 06:01 PM | #22 | |
Registered User
Join Date: Oct 2007
Location: Wilsonville Or
Posts: 705
|
Re: pls post pixs of 67-72 Panels
Quote:
|
|
01-19-2011, 09:31 PM | #23 |
Registered User
Join Date: Aug 2008
Location: greensboro nc
Posts: 684
|
Re: pls post pixs of 67-72 Panels
Ive been wondering about my harley fitting into panel also. I'll have to measure the Road King Custom,I know the springer will fit its been lowered to minimum height and has dragbars .Well it will fit if its not to ong the 42 degree rake and 3 inche extended rear swing arm might be problem.
If the road king would fit its be great for bike rally camp out of panel and not have to tow a trailer. I normally ride no matter where they are but with wife shes not up for 1800 miles riding in the ***** seat |
01-21-2011, 10:56 AM | #24 |
Registered User
Join Date: Jan 2011
Location: Delaware and Long Island, New York
Posts: 3,455
|
Re: pls post pixs of 67-72 Panels
hey guy's,new member here.let's see if i can post a pic of my panel
|
01-21-2011, 04:36 PM | #25 |
Junior Member
Join Date: Nov 2005
Location: new york
Posts: 226
|
Re: pls post pixs of 67-72 Panels
|
Bookmarks |
|
|