Dirty Dianah (No)... Bagged 72 Stepside/LSx/T56 - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

502ms · 02-07-2013, 06:09 AM

Thanks guys. I will have to see if the thread is here...
Mike...thanks. Eric...fly me up there. I can video it
Posted via Mobile Device

*project 67 sub* · 02-07-2013, 12:34 PM

hahaha. wish i could lol, i would have you bring the c10 as well

502ms · 02-07-2013, 10:40 PM

Quote:

Originally Posted by project 67 sub

hahaha. wish i could lol, i would have you bring the c10 as well

Bring your Peterbilt and we can load it up
Posted via Mobile Device

*project 67 sub* · 02-08-2013, 04:38 AM

Lol

Posted via Mobile Device

shawno72 · 02-09-2013, 07:01 PM

Hey Leon where abouts does the shifter end up? Looks so long

502ms · 02-09-2013, 07:03 PM

Next steps: remove the cab, mount the transmission and engine in place. Frame is already clean, so this will be fun.

502ms · 02-09-2013, 07:04 PM

Shawn, I have buckets. The shifter will end up right in the middle of the hump where the high hump sits. It is a beautiful thing. It looks long, but it will be perfect. No mods needed to the tranny.

shawno72 · 02-09-2013, 07:10 PM

Thats awesome can't wait to see more

502ms · 02-09-2013, 07:18 PM

Quote:

Originally Posted by shawno72

Thats awesome can't wait to see more

Thank you - can't wait to get it detailed, in the engine bay and driving

kvn1011 · 02-10-2013, 12:29 PM

awesome!! and looking good!!
I plan on dropping my 6.0 in when the weather breaks!!
<subscribed!>

502ms · 02-10-2013, 12:32 PM

Quote:

Originally Posted by kvn1011

awesome!! and looking good!!
I plan on dropping my 6.0 in when the weather breaks!!
<subscribed!>

Do you have a thread here on your build? Laying out on 24s....wow!

Thank you! I think you will be quite pleased.
Posted via Mobile Device

*project 67 sub* · 02-11-2013, 01:15 PM

Gonna repaint/clean-up engine/trans, frame, cab, front clip, and bed while your at it? Might as well do at least the frame/suspension, and engine/trans while you got it apart

Posted via Mobile Device

NewType72 · 02-12-2013, 12:13 AM

I must agree with Eric I hate not having done my frame while it was semi apart kills me to see dirt and rust

1968Mann · 02-12-2013, 01:23 AM

Everything is coming along nicely! I am going to set my cab on for a little test fitting this weekend. Hopefully it will work as well as you have described in the earlier post. Ive got a hurst shifter for mine that I would like to use.

502ms · 02-12-2013, 07:55 AM

Yes. The frame is already clean (read page 4/see pics with my hand on crossmember). There is no grease!! Just waiting for test fit. Once that is all done, will paint frame and motor/trans.
Posted via Mobile Device

RatRod68 · 02-12-2013, 11:36 AM

Oh. My. Lawd...

Are you in KY or GA?

You're truck is absolutely amazing. It is a STRIKING resemblance to my heart and soul, Nasty.

What did you end up doing with your old bed? More info on the front frame deal? Air bag setup?

Sorry i have so many questions... Seeing this truck gets me all gitty.

BTW...

It'll fit

502ms · 02-12-2013, 07:56 PM

Quote:

Originally Posted by RatRod68

Oh. My. Lawd...

Are you in KY or GA?

You're truck is absolutely amazing. It is a STRIKING resemblance to my heart and soul, Nasty.

What did you end up doing with your old bed? More info on the front frame deal? Air bag setup?

Sorry i have so many questions... Seeing this truck gets me all gitty.

BTW...

It'll fit

Hey buddy! I live in Atlanta, but once it's all done, I will drive everywhere LOL.

Old bed was sold within couple of days of removal. The front Z allows me to lay flat. Love it. I have 2600 bags from firestone, custom 4-link, and 3/8 lines with a 5 gallon tank. I have FBSS. Lays frame and can drive about .5" off the ground.

Thanks for sharing! Hope we can link up when it's running. Check my pics on pages 2-4. Great stuff IMO

Posted via Mobile Device

RatRod68 · 02-14-2013, 10:44 AM

Quote:

Originally Posted by 502ms

Hey buddy! I live in Atlanta, but once it's all done, I will drive everywhere LOL.

Old bed was sold within couple of days of removal. The front Z allows me to lay flat. Love it. I have 2600 bags from firestone, custom 4-link, and 3/8 lines with a 5 gallon tank. I have FBSS. Lays frame and can drive about .5" off the ground.

Thanks for sharing! Hope we can link up when it's running. Check my pics on pages 2-4. Great stuff IMO

Posted via Mobile Device

Oh man, i have drooled over those pictures since i first seen them on some post on facebook. They are awesome shots. Once you get it all done up we will have to do some dual burnouts

502ms · 02-14-2013, 09:54 PM

Quote:

Originally Posted by RatRod68

Oh man, i have drooled over those pictures since i first seen them on some post on facebook. They are awesome shots. Once you get it all done up we will have to do some dual burnouts

Deal!

Thanks so much!
Yes. We will

Posted via Mobile Device

**1972BackInBlackC10** · 02-15-2013, 12:31 AM

sounds awesome looking forward to some pics i will get my drool tray ready for sun or mon lol

king-918 · 02-13-2013, 02:40 AM

Finally found you on here. Couldn't remember the screen. Great truck!
Posted via Mobile Device

502ms · 02-13-2013, 07:08 AM

Quote:

Originally Posted by king-918

Finally found you on here. Couldn't remember the screen. Great truck!
Posted via Mobile Device

Thank you - I just read your thread! Making great progress! Looking forward to it. Thanks for the props!

**1972BackInBlackC10** · 02-14-2013, 09:45 AM

leon the weekend is almost here what do you have planned?

502ms · 02-14-2013, 09:34 PM

Quote:

Originally Posted by 1972BackInBlackC10

leon the weekend is almost here what do you have planned?

Motor/trans mounted in frame for test fitment.
Firewall smoothed/painted
Frame painted
Engine/trans painted
Engine /trans mounted
Posted via Mobile Device

Jimbabwe · 02-14-2013, 09:38 PM

You know better than to post some mere words with no pics!!

02-07-2013, 06:09 AM	#1
502ms Registered User Join Date: Aug 2011 Location: Atlanta, GA Posts: 1,523	Re: Dirty Dianah (No)... Bagged 72 Stepside/LSx/T56 Thanks guys. I will have to see if the thread is here... Mike...thanks. Eric...fly me up there. I can video it Posted via Mobile Device __________________ Best Regards, Leon M. Instagram: @TheDirtyDianah Bagged \| 6.0L LS \| T-56 (6-Speed Manual) \| Turbo Burnout/Rolling Video: Chevy C10 Stepside 6.0L LSx & 6-Speed Manual

02-07-2013, 12:34 PM	#2
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: Dirty Dianah (No)... Bagged 72 Stepside/LSx/T56 hahaha. wish i could lol, i would have you bring the c10 as well

02-08-2013, 04:38 AM	#4
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: Dirty Dianah (No)... Bagged 72 Stepside/LSx/T56 Lol Posted via Mobile Device

02-09-2013, 07:01 PM	#5
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Dirty Dianah (No)... Bagged 72 Stepside/LSx/T56 Hey Leon where abouts does the shifter end up? Looks so long __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

02-09-2013, 07:03 PM	#6
502ms Registered User Join Date: Aug 2011 Location: Atlanta, GA Posts: 1,523	Re: Dirty Dianah (No)... Bagged 72 Stepside/LSx/T56 Next steps: remove the cab, mount the transmission and engine in place. Frame is already clean, so this will be fun. __________________ Best Regards, Leon M. Instagram: @TheDirtyDianah Bagged \| 6.0L LS \| T-56 (6-Speed Manual) \| Turbo Burnout/Rolling Video: Chevy C10 Stepside 6.0L LSx & 6-Speed Manual

02-09-2013, 07:04 PM	#7
502ms Registered User Join Date: Aug 2011 Location: Atlanta, GA Posts: 1,523	Re: Dirty Dianah (No)... Bagged 72 Stepside/LSx/T56 Shawn, I have buckets. The shifter will end up right in the middle of the hump where the high hump sits. It is a beautiful thing. It looks long, but it will be perfect. No mods needed to the tranny. __________________ Best Regards, Leon M. Instagram: @TheDirtyDianah Bagged \| 6.0L LS \| T-56 (6-Speed Manual) \| Turbo Burnout/Rolling Video: Chevy C10 Stepside 6.0L LSx & 6-Speed Manual

02-09-2013, 07:10 PM	#8
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Dirty Dianah (No)... Bagged 72 Stepside/LSx/T56 Thats awesome can't wait to see more __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

02-10-2013, 12:29 PM	#10
kvn1011 Kvn1011 Join Date: May 2009 Location: kankakee il Posts: 560	Re: Dirty Dianah (No)... Bagged 72 Stepside/LSx/T56 awesome!! and looking good!! I plan on dropping my 6.0 in when the weather breaks!! <subscribed!> __________________ My Build Thead (Project Slow Motion)

02-11-2013, 01:15 PM	#12
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: Dirty Dianah (No)... Bagged 72 Stepside/LSx/T56 Gonna repaint/clean-up engine/trans, frame, cab, front clip, and bed while your at it? Might as well do at least the frame/suspension, and engine/trans while you got it apart Posted via Mobile Device

02-12-2013, 12:13 AM	#13
NewType72 Registered User Join Date: Feb 2012 Location: turlock Posts: 2,177	Re: Dirty Dianah (No)... Bagged 72 Stepside/LSx/T56 I must agree with Eric I hate not having done my frame while it was semi apart kills me to see dirt and rust __________________ Project NewType 1972 Chevy C/10 Cheyenne Super ( Daily Driven Showtruck ) http://67-72chevytrucks.com/vboard/s...d.php?t=507903 Project Great Grandpa's Legacy 1973 Chevy C/10 Cheyenne ( Current daily driver collecting big time parts ) http://67-72chevytrucks.com/vboard/s...89#post7084289 - Dylan (209)-985-7721

02-12-2013, 01:23 AM	#14
1968Mann Registered User Join Date: Jun 2012 Location: NWA, Arkansas Posts: 343	Re: Dirty Dianah (No)... Bagged 72 Stepside/LSx/T56 Everything is coming along nicely! I am going to set my cab on for a little test fitting this weekend. Hopefully it will work as well as you have described in the earlier post. Ive got a hurst shifter for mine that I would like to use.

02-12-2013, 07:55 AM	#15
502ms Registered User Join Date: Aug 2011 Location: Atlanta, GA Posts: 1,523	Re: Dirty Dianah (No)... Bagged 72 Stepside/LSx/T56 Yes. The frame is already clean (read page 4/see pics with my hand on crossmember). There is no grease!! Just waiting for test fit. Once that is all done, will paint frame and motor/trans. Posted via Mobile Device __________________ Best Regards, Leon M. Instagram: @TheDirtyDianah Bagged \| 6.0L LS \| T-56 (6-Speed Manual) \| Turbo Burnout/Rolling Video: Chevy C10 Stepside 6.0L LSx & 6-Speed Manual

02-12-2013, 11:36 AM	#16
RatRod68 Registered User Join Date: Aug 2007 Location: Kentucky Posts: 828	Re: Dirty Dianah (No)... Bagged 72 Stepside/LSx/T56 Oh. My. Lawd... Are you in KY or GA? You're truck is absolutely amazing. It is a STRIKING resemblance to my heart and soul, Nasty. What did you end up doing with your old bed? More info on the front frame deal? Air bag setup? Sorry i have so many questions... Seeing this truck gets me all gitty. BTW... It'll fit __________________ build Threads: Nasty 68 C10. My lil hotrod Leftovers 68 C20 D-Ranged Ford Ranger on steroids Semper Fi

02-15-2013, 12:31 AM	#20
1972BackInBlackC10 Senior Member Join Date: Jan 2012 Location: Estevan, Saskatchewan Posts: 1,025	Re: Dirty Dianah (No)... Bagged 72 Stepside/LSx/T56 sounds awesome looking forward to some pics i will get my drool tray ready for sun or mon lol

02-13-2013, 02:40 AM	#21
king-918 Registered User Join Date: Nov 2011 Location: Oklahoma City Oklahoma Posts: 1,056	Re: Dirty Dianah (No)... Bagged 72 Stepside/LSx/T56 Finally found you on here. Couldn't remember the screen. Great truck! Posted via Mobile Device __________________ <----Christopher My Tardis Oh yeah I'm really a Toyota guy, but had some stuff sitting around. Oklahoma



Register or Log In To remove these advertisements.

02-14-2013, 09:45 AM	#23
1972BackInBlackC10 Senior Member Join Date: Jan 2012 Location: Estevan, Saskatchewan Posts: 1,025	Re: Dirty Dianah (No)... Bagged 72 Stepside/LSx/T56 leon the weekend is almost here what do you have planned?

02-14-2013, 09:38 PM	#25
Jimbabwe Registered User Join Date: Dec 2011 Location: New York City Posts: 648	Re: Dirty Dianah (No)... Bagged 72 Stepside/LSx/T56 You know better than to post some mere words with no pics!!

Register or Log In To remove these advertisements.