|
05-31-2017, 02:34 PM | #1 |
Registered User
Join Date: Sep 2016
Location: Redington Beach
Posts: 1,317
|
Re: 57 Panel "FAKMLC" build
Think I'm going to fab up some cardboard cutouts of tires and mount to axle. Then measure distance to inner and outer fenders to try and work out offset.
YOSS - you did a hydroboost right ? I found the pic on your thread but couldnt see what parts you used....... trying to see if I want to take that on or just buy http://www.classicparts.com/1955-59-.../#.WS8Mh-vytpg seems a little pricey |
06-01-2017, 09:36 AM | #2 |
Registered User
Join Date: Sep 2011
Location: Nevada City, CA
Posts: 908
|
Re: 57 Panel "FAKMLC" build
The hydroboost I used came out of an Astro van and I just bought a replacement master cylinder for the same year / model. Later on I replaced that hydroboost with one from a ~80's C20 van due to leaks, kept the same master cylinder. No problems.
There is a seller on Ebay who makes hydroboost brackets with all sorts of bolt patterns, I'm sure you can find the right one for your use or just hog out the firewall bracket with a die grinder as needed and use the bracket that comes with the hydroboost. I really like hydroboost brakes as the pedal feel and performance is very very consistent and the pedal is always firm. Braking performance is improved as well. Hydraulic lines... I'm pretty sure you could actually use whatever junkyard lines you came up with, at least going from box to booster. Booster to rack, well, find lines that come wtih the right end fittings / tube bends, cut them off cleanly with a tube cutter, measure how long a hose you need (mock up with garden hose or some such?) and bring it to a hydraulic shop. I actually flared the ends of the tubes I salvaged 37* and had the hose shop just make a xx inches hose with JIC female ends. Cheap & serviceable. Hydroboost is a minor PITA compared to vacuum but I thought it was worth it, now that it's hooked up I'm glad I did it. Hope this helps.
__________________
"Over my head" 1957 Chevy 3200, big rear window & 6 lug. Front disc, power steering, Vortec 4.8 / 4L60E swap, hydro boost brakes & patina. |
06-01-2017, 10:53 AM | #3 |
Registered User
Join Date: Sep 2016
Location: Redington Beach
Posts: 1,317
|
Re: 57 Panel "FAKMLC" build
That helps.
The main parts though I dont quite get are 1) How do you know THAT hydroboost from that truck will work. Assume some have different PSI ratings/settings/returns depending on size of truck. Dont want to be blowing seals or too aggressive brakes - but guess it can be all controlled by PV ? Or another valve etc. 2) The linkage on backside to pedal. What does that look like. Did you use the existing truck pedal or the donor astro van pedal. 3) Dialing it in. Did you put a gauge on it to see how much flow/pressure and adjust .... etc Apart from that an running the hoses seems similar to putting in the vacuum assist brake etc. |
06-01-2017, 11:57 AM | #4 |
gets board easy.......
Join Date: Mar 2009
Location: Colorado Springs
Posts: 717
|
Re: 57 Panel "FAKMLC" build
Cool pannel to start with. Looks like your going in deep. Have fun
|
06-01-2017, 12:31 PM | #5 |
Registered User
Join Date: Sep 2011
Location: Nevada City, CA
Posts: 908
|
Re: 57 Panel "FAKMLC" build
1) I didn't / don't know for sure, but the '98 Chevy Astro uses the same part number power steering pump as the 2005 Chevy Silverado with 5.3 - reservoirs may be different, flow valves may be different - but the pump is the same. I was willing to take a gamble and see how it turned out and I won. If you want to be more scientific about it, what you want to do is compare the front / rear caliper piston areas on your setup to various OEM designs and match your MC diameter to one that has a comparable brake package. In my case it worked out pretty close to an Astro van which was convenient, but you want a master cylinder sized to your brake package. Next, you can steal the flow control valve (fitting that screws into the pump, which the high pressure line screws into) from the vehicle you get your booster from & put it in your pump.
Really, though, I tend to just trust the General (General Motors, that is) to keep it simple in their parts inventory and trust that things will work together "well enough" that I can make any changes I feel necessary later on. I used a firewall brake pedal setup. I used to have a frame mounted setup but found it a royal PITA to work on anything in the vicinity of it under the truck & almost impossible to bleed the brakes. I wound up chopping the end off the hydroboost & threading it 3/8 fine all the way down so I could get the pedal height where I wanted it with the frame mounted kit. I would bolt it all together, see where your pedal height comes out, and adjust things as needed. That applies to vacuum setups, too: you can't expect aftermarket parts to be exactly what you want right from the box. Or at least I haven't been able to so far. The extent of my playing with the hydraulic system has been to switch to a 13" steering wheel to reduce the leverage & slightly increase steering effort because even with the hydroboost, it felt really light. If you wanted to you could get a set of 3,000 psi gauges & flow meters and go nuts but for the expense and time involved... it's a bit much. Rockauto.com can give you part numbers & lots of information about parts; from there, just rip off as much OEM design work as you can and it'll work just fine.
__________________
"Over my head" 1957 Chevy 3200, big rear window & 6 lug. Front disc, power steering, Vortec 4.8 / 4L60E swap, hydro boost brakes & patina. |
06-01-2017, 01:17 PM | #6 |
Registered User
Join Date: Sep 2016
Location: Redington Beach
Posts: 1,317
|
Re: 57 Panel "FAKMLC" build
|
06-01-2017, 02:21 PM | #7 |
Senior Member
Join Date: May 2007
Location: Doodah Kansas
Posts: 7,774
|
Re: 57 Panel "FAKMLC" build
looking really nice! you do plan to put the axle on top of the springs, right? I ask because it looks like your axle is upside down in the pictures, the brakes wont bleed that way and the oil in the rear might not lubricate the pinion correctly and the vent will be a drain.
if you buy a universal pedal like in your ebay link, remember that it wont come with any provision for a brake switch. you will also need to reinforce it with brackets to the dash, the sheet firewall will flex a lot without the tie in to the dash and dash brace. the 82-93 s10 pedal assembly is a great choice, has provisions for a brake switch already and has the correct pin to catch the yoke on a hydroboost (but you may still need to shorten the hydroboost shaft) and is easy to tie to the dash and dash brace. keep it up!
__________________
the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393 |
06-01-2017, 02:30 PM | #8 | ||
Registered User
Join Date: Sep 2016
Location: Redington Beach
Posts: 1,317
|
Re: 57 Panel "FAKMLC" build
Quote:
Initially I want to get the truck up and running so I was planning to use the same 2" OEM leaf springs and run the axle underneath so I don't need to C-Notch the frame. Yes I think looking at that picture it needs to be flipped - will be done when I get the brackets and align everything up - good eye. Quote:
|
||
06-02-2017, 12:08 AM | #9 |
Registered User
Join Date: Mar 2013
Location: Mesquite,Tx
Posts: 416
|
Re: 57 Panel "FAKMLC" build
Panels coming along nice,Hey Fakky here is a website that helped me out a lot when I was practicing to get ready to weld in my Camaro clip, covers all types of welding.
http://www.weldingtipsandtricks.com/ For spring perches look at local trailer supply store , I got my u-bolts pads and perches for like $25 picked up. https://www.southwestwheel.com/c-38-u-bolt-kits.aspx https://www.southwestwheel.com/c-811...xle-seats.aspx |
06-02-2017, 09:31 AM | #10 |
Registered User
Join Date: Sep 2011
Location: Nevada City, CA
Posts: 908
|
Re: 57 Panel "FAKMLC" build
OH! The brake switch - I am using a CPP firewall kit from Ebay and it has a mechanical brake switch mount that I am now using. With the LS motor don't forget you need to use a "normally closed" relay so that it gives a signal to the PCM when you are just driving along and cuts that signal (and powers the brake lights) when you hit the brakes.
I can't find the CPP firewall kit that I used on Ebay right now but it may still be there. The POL kit I know nothing about except that it looks similar. The CPP kit worked, was annoying to install but not overly difficult. The big flaw to me was the pedal arm is clocked high on the pivot shaft, so the pedal by default came out really high with the hydroboost shaft - vacuum boosters might have shorter rods? Sawzall & a threading die fixed it though. Shorter booster shaft = lower pedal.
__________________
"Over my head" 1957 Chevy 3200, big rear window & 6 lug. Front disc, power steering, Vortec 4.8 / 4L60E swap, hydro boost brakes & patina. |
06-10-2017, 01:04 PM | #11 |
Registered User
Join Date: Sep 2016
Location: Redington Beach
Posts: 1,317
|
Re: 57 Panel "FAKMLC" build
|
06-10-2017, 01:07 PM | #12 |
Registered User
Join Date: Sep 2016
Location: Redington Beach
Posts: 1,317
|
Re: 57 Panel "FAKMLC" build
|
06-11-2017, 07:31 PM | #13 |
Registered User
Join Date: Sep 2016
Location: Redington Beach
Posts: 1,317
|
Re: 57 Panel "FAKMLC" build
2 hours yesterday and another 1.5 today have the manual brake assemby out as well as the transmission crossmember.
Damn rivets take time. Trying to decide if I need to take the steel channel bracket out that sits sort of behind the manual brake assembly as well as the front brake pedal bracket on frame ..... as the rivets for these also double up for the body mounts. Probably will .......... *** updaet took the bracket assembly out fore the break pedal ....... but left the larger one in as I think it could be useful for hiding part of teh harness behind (tie). If I need to later will cut it out. Need to focus on getting the rear axle mocked up so I can by wheels/tires. Last edited by FAKKY; 06-12-2017 at 11:57 AM. |
06-10-2017, 01:00 PM | #14 |
Registered User
Join Date: Sep 2016
Location: Redington Beach
Posts: 1,317
|
Re: 57 Panel "FAKMLC" build
Can't get much done this weekend have friends over today and cleaning house and yard this morning.
Did pick up some sheet metal 20 guage as well as a electric junction box for 1" punchouts. Soaked the punchouts in a bottle of phosphoric etching acid overnight ready for welding holes in firewall .... Hopefully tomorrow. Not sure how to cut the large hole though for heater core ..... Or leave alone until I get to that project. Really want to get wheels and paint front end. How did you guys decide on wheels for offset and turning radius. Worried about getting ones that are too tight once I put the front panel back on.. 3 year from now .. lol |
06-12-2017, 01:25 PM | #15 |
Registered User
Join Date: Sep 2016
Location: Redington Beach
Posts: 1,317
|
Re: 57 Panel "FAKMLC" build
Might have found my AC/HEAT source as well.
These guys are like 10 miles from me. http://www.ebay.com/itm/A-C-KIT-UNIV...item3d16217ec5 |
06-17-2017, 06:25 PM | #16 |
Registered User
Join Date: Sep 2016
Location: Redington Beach
Posts: 1,317
|
Re: 57 Panel "FAKMLC" build
|
06-17-2017, 06:26 PM | #17 |
Registered User
Join Date: Sep 2016
Location: Redington Beach
Posts: 1,317
|
Re: 57 Panel "FAKMLC" build
|
06-17-2017, 06:27 PM | #18 |
Registered User
Join Date: Sep 2016
Location: Redington Beach
Posts: 1,317
|
Re: 57 Panel "FAKMLC" build
Hope to measure backspacing and order some wheels and tires.
Get this firewall finished and sand everything back and paint it. |
06-17-2017, 06:58 PM | #19 |
Registered User
Join Date: Sep 2016
Location: Redington Beach
Posts: 1,317
|
Re: 57 Panel "FAKMLC" build
I assume since I'm going to be running an auto might as well pull the clutch and weld up that hole.
Also ... are most guys use the same brake pedal/accelerator holes ...... doing a 5.3 swap ..... unsure of DWC or DBW as yet..... not sure if it matters? Finally ..... cant remember what the large hole at pic/post #44 was ..... thing it was a bracket for the starter mechanism ..... anyone confirm ? thx Last edited by FAKKY; 06-17-2017 at 07:40 PM. |
06-17-2017, 04:18 PM | #20 |
Registered User
Join Date: Sep 2016
Location: Redington Beach
Posts: 1,317
|
Re: 57 Panel "FAKMLC" build
|
06-17-2017, 04:41 PM | #21 |
Senior Member
Join Date: May 2007
Location: Doodah Kansas
Posts: 7,774
|
Re: 57 Panel "FAKMLC" build
do it a few years, it gets slightly easier haha. I usually set the power in the middle and the wire a little less than half on my MIG, lets me hold the tacks a fraction longer and not pop through the old metal. Thats just my experience though
__________________
the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393 |
06-17-2017, 06:25 PM | #22 |
Registered User
Join Date: Sep 2016
Location: Redington Beach
Posts: 1,317
|
Re: 57 Panel "FAKMLC" build
|
06-20-2017, 12:48 PM | #23 |
Registered User
Join Date: Sep 2016
Location: Redington Beach
Posts: 1,317
|
Re: 57 Panel "FAKMLC" build
http://67-72chevytrucks.com/vboard/s...d.php?t=740604
linkback to a radiator thread for myself/others following
__________________
FAKKY 57 PANEL BUILD |
06-20-2017, 12:52 PM | #24 |
Registered User
Join Date: Sep 2016
Location: Redington Beach
Posts: 1,317
|
Re: 57 Panel "FAKMLC" build
Got most of the holes I wanted filled.
Would like to have done a few more but don't know what I need yet. Hate to weld it then redrill it. Not a show truck .... This should do
__________________
FAKKY 57 PANEL BUILD |
06-24-2017, 05:23 PM | #25 |
Registered User
Join Date: Sep 2016
Location: Redington Beach
Posts: 1,317
|
Re: 57 Panel "FAKMLC" build
Bought and test fitted these. 235/75/R15 8" wide with -19 offset.
Wouldnt call them my favourite wheel/tire combo ...... but for $500 new all the way around ..... going to swing with them. Actuallhy like the whitewall ring. Plan is to get the other 3 this week ........ and maybe source a steering shaft and get steering hooked in. I'll have 4 days off so really want to get the sanding and painting of front end done over that time. Then wiring or brakes.
__________________
FAKKY 57 PANEL BUILD |
Bookmarks |
|
|