'62 BBW SWB Highschool ride returns - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jalopy45 · 01-28-2012, 06:06 PM

Glad to see you found the filler neck. Is there a young lady trying to trade you a corvair for the PU???

Dan 67 Chevy LWB · 01-29-2012, 12:14 PM

A little buffing goes a long way.

Any recommendations on what wax to use?[/QUOTE]

Eric - I would say use car wax.

Danny

66Z71 · 01-31-2012, 11:49 AM

I just love shiny stuff

Finally settled on seat belts. The first ones were too green. The last set are really dark blue, but it seems thats as good as its gonna get. So tonight after work I'll pick up some new bolts, and get them mounted. Then I can bolt the seat down, and finally screw the sill plate down.

Dinos63 · 01-31-2012, 02:53 PM

nice work looks great!!

Bomp · 09-14-2012, 11:33 PM

lookin really good.

jalopy45 · 11-07-2012, 07:26 AM

Gotta bump this to see how the progress is going...

He'll probably use some excuse like he's been in Siberia and hasn't had time.

66Z71 · 11-07-2012, 11:20 AM

Doesn't everyone vacation there?
Actually moved it around in the shop last weekend. Going to pack the camping gear up for the winter, and clean out the rest of the garage so I can work on it again. As soon as I get back from Alabama, North Carolina, Mississippi, and South Carolina.
Posted via Mobile Device

66Z71 · 08-19-2013, 12:21 PM

Ok. It's time to get this thing done, and out of the shop. I'm tired of walking around it. I put the motor in a few years ago. It was a brand new crate motor from Chevy. We cleaned it up, and re-shot the block & heads. The last time I painted the Edelbrock intake orange, but this time I sand blasted it, and gave it a light coat of aluminum paint to help protect it.

The steering column was swapped a long time ago for one out of a buddies wrecked '69 Cutlass. It had seen better days. The turn signal thingy was broken, the starter switch worked most of the time, and the horn button was DOA. I took another column I had, and gutted it for the electrical. Sand blasted the 'original' column, and painted it to match the truck. Now I just have to get a steering wheel. I'm thinking of one of those old style chrome 3 spokes with a metalflake white grip. Just to add a little bling to it, I made a new turn signal lever. The old one was rusted, and ugly, so... cut the end of a Titanium NASCAR valve off, turned it down a bit, and stuck it into a carbon fiber arrow shaft. Cut that off, and stuck it over the original lever. Bet I got the only Titanium / Carbon Fiber turn signal lever out there

Rebuilt the Holley Carb that was on it (650 vac secondary). So last night I set it up on the bench, and hooked up an electric fuel pump to it. Good thing I did. The inlet needle on the primary side didn't want to seal. Swapped it out, and set the float levels. Tonight when I get home (if there isn't a puddle of gas under it) I will be putting it back in place.

jalopy45 · 08-19-2013, 01:36 PM

Wow, then you can get to work on your crew cab, airplane, corvairs, race car and bmw's. then you'll have some room in the shop..

66Z71 · 10-18-2013, 12:11 PM

Spent a little more time on the truck. Got the inner fenders and radiator support sand blasted, and welded up all the old holes everyone has put in them.

Even fixed a little rust that was in the lower mounts for the radiator support.

All sitting in epox primer now.

This weekend hopefull it will get a skim coat of bondo, and some flat black.

NEWFISHER · 10-18-2013, 12:56 PM

Nice work on the turn lever! The rest looks great too

TJ's Chevy · 10-18-2013, 03:24 PM

Looking perrty dang cool! nice work!

RestoringClassics · 10-18-2013, 06:26 PM

This thing is coming together SWEET!!!

Love that bench seat!

66Z71 · 10-21-2013, 10:26 AM

Thanks guys. It's finally starting to look like something. Just hope I can keep the motivation going.

66Z71 · 10-21-2013, 10:57 AM

Got a little more done this weekend.

I kinda like the shine

Just gotta wait for them to dry now. Then I can put them on.

While I was waiting, I was playing around with the steering, and noticed that the Pitman Arm was shot. Couldn't believe it but NAPA had the best price in town for a new one. So, without even having to lay on my back to reach it, I was able to change it in 10 minutes. Now every wiggle of the steering wheel = a wiggle of the tires. Can't wait to drive her again.

Low Elco · 10-21-2013, 01:01 PM

Nice work here!

jalopy45 · 04-20-2014, 09:36 AM

I think this needs a bump, just to hear the excuses. P)

66Z71 · 06-03-2014, 06:38 PM

Ok. I'm back. Race car is together and running good, quit my job (of 20+ years), and started a new business, cleaned up and sheet rocked the garage (so much nicer working in a bright room, instead of the dungeon it was. So now its time to get back to the truck.

Just cleaned the cab, and started putting the engine compartment back together.

**Captainfab** · 06-05-2014, 12:57 AM

It's good to see you back on your truck

What type of business did you start?

jalopy45 · 06-05-2014, 11:21 PM

Big change for the shop, where did you hide all the parts and goodies that were hanging on the wall? Looks like there is room to walk on the floor now too.

66Z71 · 10-20-2014, 07:46 PM

A little more progress to post. I sent the last of the cab parts out to be sandblasted. Got them back 2 days later. Very nice to see there was not much rust. But why is it that the only holes I needed for the mirror were brazed shut.

While none of the others were.... Now you see them.

Now you don't.

A little grinding...

and they're all gone.

Everything got a nice coat of Epoxy Primer.

In my makeshift paint booth.

TJ's Chevy · 10-21-2014, 11:22 AM

Very nice!

boat · 10-22-2014, 11:31 PM

Looking good

66Z71 · 10-27-2014, 05:22 PM

Got a little more done. Drivers door, and hood have been blasted, cut, welded, bondo'd, and primed. A little block sanding, and they are ready for color.

No more extra holes.

Budman56 · 02-20-2015, 04:29 PM

any updates?

01-28-2012, 06:06 PM	#76
jalopy45 Registered User Join Date: Feb 2009 Location: Christmas Valley, OR Posts: 17	Re: '62 BBW SWB Highschool ride returns Glad to see you found the filler neck. Is there a young lady trying to trade you a corvair for the PU???

01-29-2012, 12:14 PM	#77
Dan 67 Chevy LWB Registered User Join Date: Nov 2008 Location: Midlothian, TX Posts: 69	Re: '62 BBW SWB Highschool ride returns A little buffing goes a long way. Any recommendations on what wax to use?[/QUOTE] Eric - I would say use car wax. Danny __________________ Dan 67 Chevy LWB, Small Window - In the process of being rebuilt. Small Block is coming out & I'm gathering parts to switch to a Big Block 496.

01-31-2012, 11:49 AM	#78
66Z71 Registered User Join Date: Feb 2009 Location: Milwaukie, Oregon Posts: 204	Re: '62 BBW SWB Highschool ride returns I just love shiny stuff Finally settled on seat belts. The first ones were too green. The last set are really dark blue, but it seems thats as good as its gonna get. So tonight after work I'll pick up some new bolts, and get them mounted. Then I can bolt the seat down, and finally screw the sill plate down. __________________ "Always try to make the best part you can with the skills you have. If it isn't good enough throw it away and make another. Every time you make a part your skill will increase and you'll make a better part than you were capable of making before." Lil John Buttera

01-31-2012, 02:53 PM	#79
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: '62 BBW SWB Highschool ride returns nice work looks great!! __________________ CHEVY ONLY... Nothin Else !

09-14-2012, 11:33 PM	#80
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: '62 BBW SWB Highschool ride returns lookin really good.

11-07-2012, 07:26 AM	#81
jalopy45 Registered User Join Date: Feb 2009 Location: Christmas Valley, OR Posts: 17	Re: '62 BBW SWB Highschool ride returns Gotta bump this to see how the progress is going... He'll probably use some excuse like he's been in Siberia and hasn't had time.

11-07-2012, 11:20 AM	#82
66Z71 Registered User Join Date: Feb 2009 Location: Milwaukie, Oregon Posts: 204	Re: '62 BBW SWB Highschool ride returns Doesn't everyone vacation there? Actually moved it around in the shop last weekend. Going to pack the camping gear up for the winter, and clean out the rest of the garage so I can work on it again. As soon as I get back from Alabama, North Carolina, Mississippi, and South Carolina. Posted via Mobile Device __________________ "Always try to make the best part you can with the skills you have. If it isn't good enough throw it away and make another. Every time you make a part your skill will increase and you'll make a better part than you were capable of making before." Lil John Buttera

08-19-2013, 12:21 PM	#83
66Z71 Registered User Join Date: Feb 2009 Location: Milwaukie, Oregon Posts: 204	Re: '62 BBW SWB Highschool ride returns Ok. It's time to get this thing done, and out of the shop. I'm tired of walking around it. I put the motor in a few years ago. It was a brand new crate motor from Chevy. We cleaned it up, and re-shot the block & heads. The last time I painted the Edelbrock intake orange, but this time I sand blasted it, and gave it a light coat of aluminum paint to help protect it. The steering column was swapped a long time ago for one out of a buddies wrecked '69 Cutlass. It had seen better days. The turn signal thingy was broken, the starter switch worked most of the time, and the horn button was DOA. I took another column I had, and gutted it for the electrical. Sand blasted the 'original' column, and painted it to match the truck. Now I just have to get a steering wheel. I'm thinking of one of those old style chrome 3 spokes with a metalflake white grip. Just to add a little bling to it, I made a new turn signal lever. The old one was rusted, and ugly, so... cut the end of a Titanium NASCAR valve off, turned it down a bit, and stuck it into a carbon fiber arrow shaft. Cut that off, and stuck it over the original lever. Bet I got the only Titanium / Carbon Fiber turn signal lever out there Rebuilt the Holley Carb that was on it (650 vac secondary). So last night I set it up on the bench, and hooked up an electric fuel pump to it. Good thing I did. The inlet needle on the primary side didn't want to seal. Swapped it out, and set the float levels. Tonight when I get home (if there isn't a puddle of gas under it) I will be putting it back in place. __________________ "Always try to make the best part you can with the skills you have. If it isn't good enough throw it away and make another. Every time you make a part your skill will increase and you'll make a better part than you were capable of making before." Lil John Buttera

08-19-2013, 01:36 PM	#84
jalopy45 Registered User Join Date: Feb 2009 Location: Christmas Valley, OR Posts: 17	Re: '62 BBW SWB Highschool ride returns Wow, then you can get to work on your crew cab, airplane, corvairs, race car and bmw's. then you'll have some room in the shop..

10-18-2013, 12:11 PM	#85
66Z71 Registered User Join Date: Feb 2009 Location: Milwaukie, Oregon Posts: 204	Re: '62 BBW SWB Highschool ride returns Spent a little more time on the truck. Got the inner fenders and radiator support sand blasted, and welded up all the old holes everyone has put in them. Even fixed a little rust that was in the lower mounts for the radiator support. All sitting in epox primer now. This weekend hopefull it will get a skim coat of bondo, and some flat black. __________________ "Always try to make the best part you can with the skills you have. If it isn't good enough throw it away and make another. Every time you make a part your skill will increase and you'll make a better part than you were capable of making before." Lil John Buttera

10-18-2013, 12:56 PM	#86
NEWFISHER Registered User Join Date: Sep 2012 Location: Oregon Posts: 3,303	Re: '62 BBW SWB Highschool ride returns Nice work on the turn lever! The rest looks great too

10-18-2013, 03:24 PM	#87
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: '62 BBW SWB Highschool ride returns Looking perrty dang cool! nice work! __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

10-18-2013, 06:26 PM	#88
RestoringClassics Registered User Join Date: May 2013 Location: California Posts: 29	Re: '62 BBW SWB Highschool ride returns This thing is coming together SWEET!!! Love that bench seat! __________________ Brandon 65 Chevy C-10, 427 BBC with Corvette 6-Speed.

10-21-2013, 10:26 AM	#89
66Z71 Registered User Join Date: Feb 2009 Location: Milwaukie, Oregon Posts: 204	Re: '62 BBW SWB Highschool ride returns Thanks guys. It's finally starting to look like something. Just hope I can keep the motivation going. __________________ "Always try to make the best part you can with the skills you have. If it isn't good enough throw it away and make another. Every time you make a part your skill will increase and you'll make a better part than you were capable of making before." Lil John Buttera

10-21-2013, 10:57 AM	#90
66Z71 Registered User Join Date: Feb 2009 Location: Milwaukie, Oregon Posts: 204	Re: '62 BBW SWB Highschool ride returns Got a little more done this weekend. I kinda like the shine Just gotta wait for them to dry now. Then I can put them on. While I was waiting, I was playing around with the steering, and noticed that the Pitman Arm was shot. Couldn't believe it but NAPA had the best price in town for a new one. So, without even having to lay on my back to reach it, I was able to change it in 10 minutes. Now every wiggle of the steering wheel = a wiggle of the tires. Can't wait to drive her again. __________________ "Always try to make the best part you can with the skills you have. If it isn't good enough throw it away and make another. Every time you make a part your skill will increase and you'll make a better part than you were capable of making before." Lil John Buttera



Register or Log In To remove these advertisements.

10-21-2013, 01:01 PM	#91
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: '62 BBW SWB Highschool ride returns Nice work here! __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

04-20-2014, 09:36 AM	#92
jalopy45 Registered User Join Date: Feb 2009 Location: Christmas Valley, OR Posts: 17	Re: '62 BBW SWB Highschool ride returns I think this needs a bump, just to hear the excuses. P)

06-03-2014, 06:38 PM	#93
66Z71 Registered User Join Date: Feb 2009 Location: Milwaukie, Oregon Posts: 204	Re: '62 BBW SWB Highschool ride returns Ok. I'm back. Race car is together and running good, quit my job (of 20+ years), and started a new business, cleaned up and sheet rocked the garage (so much nicer working in a bright room, instead of the dungeon it was. So now its time to get back to the truck. Just cleaned the cab, and started putting the engine compartment back together. __________________ "Always try to make the best part you can with the skills you have. If it isn't good enough throw it away and make another. Every time you make a part your skill will increase and you'll make a better part than you were capable of making before." Lil John Buttera

06-05-2014, 12:57 AM	#94
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,250	Re: '62 BBW SWB Highschool ride returns It's good to see you back on your truck What type of business did you start? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

06-05-2014, 11:21 PM	#95
jalopy45 Registered User Join Date: Feb 2009 Location: Christmas Valley, OR Posts: 17	Re: '62 BBW SWB Highschool ride returns Big change for the shop, where did you hide all the parts and goodies that were hanging on the wall? Looks like there is room to walk on the floor now too.

10-20-2014, 07:46 PM	#96
66Z71 Registered User Join Date: Feb 2009 Location: Milwaukie, Oregon Posts: 204	Re: '62 BBW SWB Highschool ride returns A little more progress to post. I sent the last of the cab parts out to be sandblasted. Got them back 2 days later. Very nice to see there was not much rust. But why is it that the only holes I needed for the mirror were brazed shut. While none of the others were.... Now you see them. Now you don't. A little grinding... and they're all gone. Everything got a nice coat of Epoxy Primer. In my makeshift paint booth. __________________ "Always try to make the best part you can with the skills you have. If it isn't good enough throw it away and make another. Every time you make a part your skill will increase and you'll make a better part than you were capable of making before." Lil John Buttera

10-21-2014, 11:22 AM	#97
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: '62 BBW SWB Highschool ride returns Very nice! __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

10-22-2014, 11:31 PM	#98
boat Registered User Join Date: Apr 2010 Location: bartlett Tn Posts: 276	Re: '62 BBW SWB Highschool ride returns Looking good __________________ STEVES 63 BUILD http://67-72chevytrucks.com/vboard/s...d.php?t=412554 GIBSON63 YouTube channel https://www.youtube.com/user/1gibsonl4

10-27-2014, 05:22 PM	#99
66Z71 Registered User Join Date: Feb 2009 Location: Milwaukie, Oregon Posts: 204	Re: '62 BBW SWB Highschool ride returns Got a little more done. Drivers door, and hood have been blasted, cut, welded, bondo'd, and primed. A little block sanding, and they are ready for color. No more extra holes. __________________ "Always try to make the best part you can with the skills you have. If it isn't good enough throw it away and make another. Every time you make a part your skill will increase and you'll make a better part than you were capable of making before." Lil John Buttera

02-20-2015, 04:29 PM	#100
Budman56 Registered User Join Date: Aug 2011 Location: Patterson California Posts: 1,133	Re: '62 BBW SWB Highschool ride returns any updates? __________________ MY 65 C20 BUILD http://67-72chevytrucks.com/vboard/s...d.php?t=483346 ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/

Register or Log In To remove these advertisements.