CA Dummy Filler Neck/Tank Delete for 67-72 Trucks with Removed In-Cab Tank - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Johnl48** · 03-03-2022, 01:32 PM

No hurry for me

**D.PASSMORE** · 03-03-2022, 01:42 PM

Quote:

Originally Posted by pjmoreland

I was informed yesterday by the machine shop that their laser cutting machine went down and orders are backing up while getting the machine fixed. This is a different shop than I used last time, so I canceled that order, and placed a new order with the shop I used last time. They quoted four weeks, but last time they had the parts done in about two. I'm sorry about the delay.

My trucks not suffering. Thanks for the update.

KQQL IT · 03-06-2022, 07:47 PM

Got mine on today.
Super easy install.
Looks factory

And some sweet patina fell out of the front cab support.
Closer to an air ride cab yet.

**pjmoreland** · 03-06-2022, 07:51 PM

Quote:

Originally Posted by KQQL IT

Got mine on today.
Super easy install.
Looks factory

And some sweet patina fell out of the front cab support.
Closer to an air ride cab yet.

Nice! Thanks for posting your photos. I like the locking gas cap. Nobody will be putting any gas in there by mistake.

Looks like you tightened those four larger screws a bit. Did they help snug up the fit?

KQQL IT · 03-06-2022, 07:57 PM

Maybe a turn more than touching. Seemed like it tightened the whole deal up.
Very happy with the install and end result.

Thank you

KQQL IT · 03-06-2022, 07:58 PM

And only the locking cap because that's what I had.
Still want the chrome one with a springy snake to surprise someone

**pjmoreland** · 03-06-2022, 08:00 PM

Quote:

Originally Posted by KQQL IT

And only the locking cap because that's what I had.
Still want the chrome one with a springy snake to surprise someone

Who wouldn't want that?? Haha.

KQQL IT · 03-06-2022, 08:07 PM

Quote:

Originally Posted by pjmoreland

Who wouldn't want that?? Haha.

Probably 60% of the reason I got it.
40% for deleting the cab tank and not having to fix the hole

**jollymon02** · 03-07-2022, 08:29 AM

Quote:

Originally Posted by pjmoreland

I was informed yesterday by the machine shop that their laser cutting machine went down and orders are backing up while getting the machine fixed. This is a different shop than I used last time, so I canceled that order, and placed a new order with the shop I used last time. They quoted four weeks, but last time they had the parts done in about two. I'm sorry about the delay.

No worries about the delay for me, Truck is 1/2 torn down. I want this ready for the reassemble.

SD69C10 · 03-07-2022, 03:20 PM

Quote:

Originally Posted by pjmoreland

I was informed yesterday by the machine shop that their laser cutting machine went down and orders are backing up while getting the machine fixed. This is a different shop than I used last time, so I canceled that order, and placed a new order with the shop I used last time. They quoted four weeks, but last time they had the parts done in about two. I'm sorry about the delay.

Thanks for the update and no rush for me either...trucks been on jack stands for 5 months and counting.

**truckdude239** · 03-07-2022, 05:19 PM

i would like to get in on the next batch of these if you plan another patch one modiifed for outlett

**pjmoreland** · 03-07-2022, 05:20 PM

I will add you to the list. I am currently making a batch of 25, and you will be #19 on the list. Thanks!

**truckdude239** · 03-07-2022, 05:22 PM

Quote:

Originally Posted by pjmoreland

I will add you to the list. I am currently making a batch of 25, and you will be #19 on the list. Thanks!

sounds good jus tlet me know when to pay you thanks man

**pjmoreland** · 03-07-2022, 05:22 PM

Quote:

Originally Posted by truckdude239

sounds good jus tlet me know when to pay you thanks man

Will do

duallyjams · 03-09-2022, 10:29 AM

Quote:

Originally Posted by pjmoreland

Not that I'm aware of. Based on photos I see online, the 60-66 grommet looks similar to the 67-70 grommet. I'll order a 60-66 grommet so I can take some measurements.

Just checking to see if you have had a chance on the 60-66 grommet fitment.

**pjmoreland** · 03-09-2022, 10:51 AM

Quote:

Originally Posted by duallyjams

Just checking to see if you have had a chance on the 60-66 grommet fitment.

I did purchase a 60-66 grommet, and I see that the filler neck passes through it at an angle. Also, the cab hole is smaller on 60-66, so the 67+ grommet won't work. I plan on trying a couple of different ways of dealing with that angle once I've fabricated this next batch.

duallyjams · 03-09-2022, 10:57 AM

Quote:

Originally Posted by pjmoreland

I did purchase a 60-66 grommet, and I see that the filler neck passes through it at an angle. Also, the cab hole is smaller on 60-66, so the 67+ grommet won't work. I plan on trying a couple of different ways of dealing with that angle once I've fabricated this next batch.

Thanks. Definitely interested if it will work.

**pjmoreland** · 03-11-2022, 07:17 PM

Thundarr, who made the original suggestion to make this dummy filler neck work with an AC power outlet, posted a photo of it in his build thread. Thank you, Thundarr!

https://67-72chevytrucks.com/vboard/...70#post9050170

By the way, in this next batch, I am going to use standard pan-head screws instead of flat-head screws on the regular non-power-outlet version. For those of you who plan on attaching a power outlet, you will need to let me know so I can machine the countersinks for flat-head screws for you.

**pjmoreland** · 03-15-2022, 05:11 PM

Quote:

Originally Posted by pjmoreland

I was informed yesterday by the machine shop that their laser cutting machine went down and orders are backing up while getting the machine fixed. This is a different shop than I used last time, so I canceled that order, and placed a new order with the shop I used last time. They quoted four weeks, but last time they had the parts done in about two. I'm sorry about the delay.

I just got a shipment notification from the machine shop. This current batch might be ready by late next week depending on how quickly the parts get here.

**jollymon02** · 03-15-2022, 05:24 PM

Quote:

Originally Posted by pjmoreland

I just got a shipment notification from the machine shop. This current batch might be ready by late next week depending on how quickly the parts get here.

Right on!

67C10Step · 03-21-2022, 07:17 PM

Super! Just let me know and I’ll send you some $$

**pjmoreland** · 03-21-2022, 07:26 PM

Quote:

Originally Posted by 67C10Step

Super! Just let me know and I’ll send you some $$

Will do. I'll send a PM to everyone on the waiting list with payment instructions once they are ready to ship. Thanks!

**justKIDn** · 03-24-2022, 07:07 AM

Nice!!

**jollymon02** · 03-25-2022, 07:01 AM

You are a machine

**pjmoreland** · 03-25-2022, 04:03 PM

It occurred to me that I need to be able to pull my truck out of the garage to paint the filler necks. My rear axle assembly is removed at the moment, so I'm going to need to spend the next few days getting that put back together before I can paint the filler necks. I'm sorry about the delay.

03-03-2022, 01:32 PM	#76
Johnl48 Senior Member Join Date: Jun 2021 Location: West milford nj Posts: 326	Re: Dummy Filler Neck for 67-72 Trucks with Removed In-Cab Tank No hurry for me

03-06-2022, 07:47 PM	#78
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,237	Re: Dummy Filler Neck for 67-72 Trucks with Removed In-Cab Tank Got mine on today. Super easy install. Looks factory And some sweet patina fell out of the front cab support. Closer to an air ride cab yet. Attached Images __________________ " That didnt make it any newer " " Dont antique the equipment "

03-06-2022, 07:57 PM	#80
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,237	Re: Dummy Filler Neck for 67-72 Trucks with Removed In-Cab Tank Maybe a turn more than touching. Seemed like it tightened the whole deal up. Very happy with the install and end result. Thank you __________________ " That didnt make it any newer " " Dont antique the equipment "

03-06-2022, 07:58 PM	#81
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,237	Re: Dummy Filler Neck for 67-72 Trucks with Removed In-Cab Tank And only the locking cap because that's what I had. Still want the chrome one with a springy snake to surprise someone __________________ " That didnt make it any newer " " Dont antique the equipment "

03-07-2022, 05:19 PM	#86
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: Dummy Filler Neck for 67-72 Trucks with Removed In-Cab Tank i would like to get in on the next batch of these if you plan another patch one modiifed for outlett __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

03-07-2022, 05:20 PM	#87
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,797	Re: Dummy Filler Neck for 67-72 Trucks with Removed In-Cab Tank I will add you to the list. I am currently making a batch of 25, and you will be #19 on the list. Thanks!

03-11-2022, 07:17 PM	#93
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,797	Re: Dummy Filler Neck for 67-72 Trucks with Removed In-Cab Tank Thundarr, who made the original suggestion to make this dummy filler neck work with an AC power outlet, posted a photo of it in his build thread. Thank you, Thundarr! https://67-72chevytrucks.com/vboard/...70#post9050170 By the way, in this next batch, I am going to use standard pan-head screws instead of flat-head screws on the regular non-power-outlet version. For those of you who plan on attaching a power outlet, you will need to let me know so I can machine the countersinks for flat-head screws for you.

03-21-2022, 07:17 PM	#96
67C10Step Registered User Join Date: Jul 2019 Location: Beebe, AR Posts: 2,471	Re: Dummy Filler Neck for 67-72 Trucks with Removed In-Cab Tank Super! Just let me know and I’ll send you some $$ __________________ 1967 C10 1980 Jeep CJ5 2020 Toyota 4Runner 2024 Toyota Tundra

03-24-2022, 07:07 AM	#98
justKIDn Registered User Join Date: Jul 2017 Location: Brusly, LA Posts: 88	Re: Dummy Filler Neck for 67-72 Trucks with Removed In-Cab Tank Nice!!

03-25-2022, 07:01 AM	#99
jollymon02 Junior Member Join Date: Jun 2021 Location: Fort Worth, TX Posts: 54	Re: Dummy Filler Neck for 67-72 Trucks with Removed In-Cab Tank You are a machine

03-25-2022, 04:03 PM	#100
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,797	Re: Dummy Filler Neck for 67-72 Trucks with Removed In-Cab Tank It occurred to me that I need to be able to pull my truck out of the garage to paint the filler necks. My rear axle assembly is removed at the moment, so I'm going to need to spend the next few days getting that put back together before I can paint the filler necks. I'm sorry about the delay.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.