Do you need '64-'66 Chevy Truck Parts?

[LILRED66]

Originally Posted by Stepside65

Tony,
I know this is pushing my luck but do you have an good running 283 or 327 with at all possible a SM420 trans? I know shipping will be ugly. Also interested in a complete wiring harness for a 65-66 stepside for a V8 engine. Zip code is 88330.
Thanks,

The two factory running 327 engines I have went into a '66 Chevy C20 Custom Camper and a '66 Chevy K10 I am working on. I have a factory '66 283 with low miles, but it is making a slight noise in the lower end, that I can't figure out even after replacing the timing chain and drive gears. It doesn't have water in the oil or overheat, but I can't figure it out, so I will keep it as a builder.

I do have a few good, used SM420 4-speed transmissions, but they are heavier than boat anchors, so they would have to shipped via truck line or Greyhound. I estimate that to cost approximately $125.00-$175.00. You can buy a good, used transmission locally for that kind of money.

Sorry I couldn't be of more assistance, but please let me know if I can help you with other 4-5-6 Chevy Truck parts in the future and thanks for your interest.

[LILRED66]

Originally Posted by ironbutt_lcmc

I would like a price on the big window cab. I also need vent window frames for both doors. I will be in kc around 4-5-08 picking up motor / trans / rear end for my 35 chev street rod from a shop on winner rd.

Thanks for the inquiry. I sold the big back window cab last weekend, along with the swb fleetside bed.

I do have a few pairs of vent window assemblies. They will need to be overhauled with one of the vent window rebuild kits, to be cherry, but they are functional and complete.

Let me know if you are interested in the vent window assemblies or other 4-5-6 Chevy Truck parts and I will reply accordingly.

When you are in town the first week in April, drop by my shop and check out the 4-5-6 Chevy Trucks and parts inventory I have. I also have a few 4-5-6 Chevy Truck builds going on, that you can take a look at if your schedule allows.

I will PM my contact information to you, if you are able to make it by the shop.

[Stepside65]

Do you have any good or decent wiring harnesses for a v8? The one i have right now is for a 63 GMC with a V6.

[LILRED66]

Originally Posted by Stepside65

Do you have any good or decent wiring harnesses for a v8? The one i have right now is for a 63 GMC with a V6.

Thanks for the inquiry. The wiring harness I have are for '64-'66 V8 and six cylinder...gauges or warning lights. Does you dash cluster have gauges or warning lights?

Let me know and I will see what I have and thanks for your interest in my 4-5-6 Chevy Truck parts.

[Iron-Butt]

I need both complete vent windows and frames in doors. How much are they. I will pick them up at your shop.

[LILRED66]

Originally Posted by ironbutt_lcmc

I need both complete vent windows and frames in doors. How much are they. I will pick them up at your shop.

David:

Thanks for your interest in my 4-5-6 Chevy Truck parts. I buy/sell/trade 4-5-6 Chevy Trucks and parts. All of my inventory is used factory equipment.

I have several sets of complete vent window assemblies. They will need new runners installed, but the glass, vent handles, glass and rubber are in good, used condition and operate properly.

I will PM you with prices and my shop address.

Thanks again for your interest in my 4-5-6 Chevy Truck parts.

[283 Man]

how much for cab sails ? would you be willing trade a pair of cab sails for a factory Harrision 4 core raditor I have? Morton

[LILRED66]

Originally Posted by 283 Man

how much for cab sails ? would you be willing trade a pair of cab sails for a factory Harrision 4 core raditor I have? Morton

Morton:

Good to hear from you...I hope all is well.

The '63 factory Custom Cab sails are no longer available. If you need other parts, you are willing to trade for the radiator, let me know and I'm sure we can work something out.

Take care and let me know your thoughts.

[283 Man]

Sorry about misunderstanding on other post just looking over my only Son ,its just instink.Good morning to youI would be interested in a 64-66 pair of cab sails if you have a pair of them? for trade of 4 core factory Harrison Rad. Morton

[LILRED66]

Morton:

Sorry for the mishap, as well. I will trade a good set of used '64-'66 Chevy Custom Cab sails for your good, used factory Harrison 4 core radiator. Let's do it. Let me know your thoughts.

[283 Man]

Sure what would shipping be for 72712 on Cab Sails?How do you want the 4 core rad. shipped to your shop or meet some were close to extange parts. The Cab Sails will be for Matthews 66 .Which ever way You want do this ok with me. Morton

[joe231]

Hey Tony, just curious, what are a good set of factory sails worth?

[283 Man]

I know reproduction ones thur classic parts of America are over $100 Joe that way going used route.

[LILRED66]

Originally Posted by 283 Man

Sure what would shipping be for 72712 on Cab Sails?How do you want the 4 core rad. shipped to your shop or meet some were close to extange parts. The Cab Sails will be for Matthews 66 .Which ever way You want do this ok with me. Morton

Morton:

You have a PM regarding the Custom cab sails and Harrison 4 core radiator.

[LILRED66]

Originally Posted by joe231

Hey Tony, just curious, what are a good set of factory sails worth?

Joe:

I will send you a PM regarding a good set of '64-'66 Custom cab sails. Thanks for your interest and let me know if I can help you with other 4-5-6 Chevy Truck parts in the future.

[LILRED66]

Originally Posted by 283 Man

I know reproduction ones thur classic parts of America are over $100 Joe that way going used route.

Classic Parts sells reproduction '64-'66 Chevy Custom Cab sails for $169.95, plus tax and shipping, per their current catalog.

[Drummer]

Do you have 1 1966 c-20 side emblem in stock?

[LILRED66]

Originally Posted by Drummer

Do you have 1 1966 c-20 side emblem in stock?

Thanks for your interest. I will check my inventory and see what I have. If I have one, I will post pictures of it. Thanks again for your interest.

[71'tahoe]

Do you have any good doors,fenders,inner fenders,core support or fan shrouds for a 1-ton 65' with a striaght six engine??

[LILRED66]

Originally Posted by 71'tahoe

Do you have any good doors,fenders,inner fenders,core support or fan shrouds for a 1-ton 65' with a striaght six engine??

Thanks for the inquiry...I have all of the above. I will PM you with descriptions, prices and photos of these items. Thanks for your interest in my 4-5-6 Chevy Truck parts.

[283 Man]

Tony, got 2 really good shape C-20 chevy emblems both off a 3/4 "66"chevy patred out coulpe years ago.I dont think they reproduce the C-20 emblems?I would very much like to trade you your (Cab Sails for the C-20 emblems,) Ill get you pictures of both next day or so if your interested in trading.I wont be using them would rather a person who has a use for them get them both.(If we can trade I pay shipping on Cab Sails and you could pay shipping on smaller C-20 emblems. Thanks,Morton

[LILRED66]

Originally Posted by 283 Man

Tony, got 2 really good shape C-20 chevy emblems both off a 3/4 "66"chevy patred out coulpe years ago.I dont think they reproduce the C-20 emblems?I would very much like to trade you your (Cab Sails for the C-20 emblems,) Ill get you pictures of both next day or so if your interested in trading.I wont be using them would rather a person who has a use for them get them both.(If we can trade I pay shipping on Cab Sails and you could pay shipping on smaller C-20 emblems. Thanks,Morton

Morton:

Thanks for keeping me in mind. I will do that trade. Provide your mailing address and I will pay to ship the 4-5-6 Custom Cab sails to you.

I will PM my mailing address and you pay shipping for the '66 Chevy C20 emblems. You are correct, they do not reproduce the C20 emblems.

Any chance you have a pair of '66 Custom Camper body badges? I am looking to replace the set stolen from my '66 Chevy C20 Custom Camper lwb fleetside.

Thanks again for thinking of me and let me know your thoughts.

[283 Man]

thanks for trade!! again keeping you in mind thoughout my Son Matthews 66 build will need more parts in future for both trucksMorton

[LILRED66]

Originally Posted by Drummer

Do you have 1 1966 c-20 side emblem in stock?

Drummer:

I didn't forget about you. I will check my inventory today and let you know what I have. Thanks for your interest in my 4-5-6 Chevy Truck parts and let me know if I can help you with other 4-5-6 Chevy Truck parts in the future.

[LILRED66]

Drummer:

Sorry for my delay in responding. I do not have any '66 C20 emblems in my inventory. I have a few '65 C20 emblems, but that will not help you.

Sorry I wasn't able to come through, but please keep me in mind if you need other 4-5-6 Chevy Truck parts in the future.