1972 Chevy Crew Cab “Denali” - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TA_C10 · 12-03-2020, 11:20 AM

This truck is gonna be awesome, keep up the good work!

**Dieselwrencher** · 12-03-2020, 04:22 PM

The inner and outer roof are looking great!!! You're so close now!

**72 tigger** · 12-03-2020, 05:05 PM

Great progress! I like the renderings

Madkidd007 · 12-03-2020, 07:07 PM

Quote:

Originally Posted by ShortbedClayton

Also in the last few months I took the time and worked with a fella up in Canada and got a 3D rendering for this build and he knocked it out of the park. Defianly got my motivation back for sure. If you need a rendering done I highly recommend Chad at RenderedRides. Killer work..
Posted via Mobile Device

I guess blue is out for me, and to think I had the paint given to me for free.

**ShortbedClayton** · 12-03-2020, 07:43 PM

Quote:

Originally Posted by Madkidd007

I guess blue is out for me, and to think I had the paint given to me for free.

Don’t change your plans cuz of me bud! Do it. I found super nice blue OEM interior parts that’s why I went blue and white. Originally was gonna do forest green and white
Posted via Mobile Device

Madkidd007 · 12-03-2020, 08:26 PM

Quote:

Originally Posted by ShortbedClayton

Don’t change your plans cuz of me bud! Do it. I found super nice blue OEM interior parts that’s why I went blue and white. Originally was gonna do forest green and white
Posted via Mobile Device

Well truth be told I couldn’t make up my mind. This helps me narrow it down to red and black or red and white. Kinda was hoping I’d have an excuse to use my red interior pieces I have

**ShortbedClayton** · 12-03-2020, 08:27 PM

Quote:

Originally Posted by Madkidd007

Well truth be told I couldn’t make up my mind. This helps me narrow it down to red and black or red and white. Kinda was hoping I’d have an excuse to use my red interior pieces I have

I think red and white would be awesome especially if you have some red interior parts. I’ve never seen a red/white 4 door
Posted via Mobile Device

**ShortbedClayton** · 12-03-2020, 08:28 PM

Quote:

Originally Posted by Dieselwrencher

The inner and outer roof are looking great!!! You're so close now!

Front support, rockers and door bottom patches and rust be gone 👍🏻
Posted via Mobile Device

Bones72Super · 12-06-2020, 11:22 AM

Looking amazing Clayton! Keep up the great work bud

**ShortbedClayton** · 12-07-2020, 08:28 AM

Quote:

Originally Posted by Bones72Super

Looking amazing Clayton! Keep up the great work bud

Thank ya my friend!!
Posted via Mobile Device

**ShortbedClayton** · 12-21-2020, 08:44 AM

More rust repair work up front. Got all cut out and ended up being worse than I originally thought but still no big deal.. got a floor patch in along with new front support, lower kick panel patch and the lower section of the A piller..Also got the rocker installed. Not 100% pleased with aftermarket rocker fitment but got it best I could. Moved onto the 4th door area and modified 2 drivers side rockers becuse I had to form the front part to accept the new B pillar. Tried to keep it as factory looking in that area as possible and I’m happy with the result. Just have to do a rocker backing piece yet and the drivers side is about done..
Posted via Mobile Device

Bones72Super · 12-23-2020, 07:40 PM

Very nice work as always, looks great

**kev2809** · 12-23-2020, 11:18 PM

amazing work! ive always wanted one of these crew cabs...love those renderings

**ShortbedClayton** · 12-29-2020, 08:10 AM

Spent the Christmas vacation in the garage but took a break from cab floor repairs.. Since I’m installing bucket seats and console in this truck I decided that I didn’t want my passenger seat solid mounted like a single cab truck but instead I’ll solid mount the rear bench seat. So I took some junkyard find 1972 k5 drivers side seat tracks and cut them apart. Grinding rivets off the seat mount pedestals. Welded holes shut in the slide rail. Next I had to reverse everything to the opposite side on the latch rail piece. Had to bend up a piece of 12 ga. steel for the angle. Where the adjuster lever connects. I made a few errors along the way but that’s metal work. Grinder fixed that. My tracks were missing the engagement latch piece that goes thru the tracks and latches in the notches so I had to get a set out of bench seat tracks. Surprisingly they are different so I again had to weld them up and regrind the notches..lastly was the engagement lever. I think I cut it 5 times and flipped stuff heated and bent the handle part. That’s was the hardest bit of it all. Also welded a new foot on the one as it was rotted away. After 15 hours I have passenger side adjustable bucket seat tracks mirrored of the drivers side. Next it to get mounted to floor with necessary reinforcement plates..
Posted via Mobile Device

**ShortbedClayton** · 12-29-2020, 08:11 AM

A few more pics. Was so into making them I didn’t take many progress pics..
Posted via Mobile Device

TA_C10 · 12-29-2020, 09:33 AM

Very nice.

**72 tigger** · 12-29-2020, 07:52 PM

Good idea, nice fabrication

Bones72Super · 12-30-2020, 09:02 PM

I got some buckets that will great in there

**ShortbedClayton** · 01-12-2021, 12:59 PM

Quote:

Originally Posted by Bones72Super

I got some buckets that will great in there

When they go in there that will be my favorite piece of the cab!! 👌🏻
Posted via Mobile Device

**ShortbedClayton** · 01-12-2021, 01:02 PM

Finished up the last rocker and backing plate on the passenger side. Now the cab is almost completed gotta tidy some things up yet with some extra holes. Got the trans tunnel cut out as well so it’s officially 4wd! Ordered all the trim for this build as well so now it’s time to start hanging sheet metal so I can get the trim layer out.
Posted via Mobile Device

**ShortbedClayton** · 01-12-2021, 01:05 PM

Picked up some goodies this past weekend for the ole girl. Had the truck rolled outside for the first time in 2021. Working on mock up now. Moved the engine crossmember foreward 2”. Also replaced the front most crossmember as mine was bent.. set the big block in with new poly mounts and fits snug as a rug.
Posted via Mobile Device

**ShortbedClayton** · 01-12-2021, 01:07 PM

Got the transmission and transfer case bolted up under as well so I could relocate the trans crossmember. Went ahead and installed a skid plate I made off an original one. Installed the secondary crossmember for that as well. Think I’m gonna stick two more crossmembers back the frame where my splice and addition is..
Posted via Mobile Device

Custom 68 · 01-12-2021, 01:26 PM

That is looking amazing. You are doing some fine work for sure!
Dave

**ShortbedClayton** · 01-12-2021, 01:30 PM

Quote:

Originally Posted by Custom 68

That is looking amazing. You are doing some fine work for sure!
Dave

Thank you. Trying to keep that factory look..
Posted via Mobile Device

**ShortbedClayton** · 01-12-2021, 01:34 PM

Picked up all the sheet metal for my shortbed. With so much metal work involved with this crew cab conversion I kinda burnt myself out in that department so I went ahead with aftermarket bed parts. So far with minimal altercations it seems to be fitting up decent and there is zero rust to fix which makes me happy.
Posted via Mobile Device

12-03-2020, 11:20 AM	#76
TA_C10 Registered User Join Date: Jun 2018 Location: Texas Posts: 1,353	Re: 1972 Chevy Crew Cab “Denali” This truck is gonna be awesome, keep up the good work! __________________ TA_C10 Stage 1 build - http://67-72chevytrucks.com/vboard/s....php?p=8333444 "It's only money".

12-03-2020, 04:22 PM	#77
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: 1972 Chevy Crew Cab “Denali” The inner and outer roof are looking great!!! You're so close now! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

12-03-2020, 05:05 PM	#78
72 tigger Senior Member Join Date: Apr 2008 Location: Berne IN Posts: 3,240	Re: 1972 Chevy Crew Cab “Denali” Great progress! I like the renderings __________________ 71 C10 72 K20 72 K10 Super Kirk

12-06-2020, 11:22 AM	#84
Bones72Super Registered User Join Date: Sep 2017 Location: Lake Travis,Texas Posts: 769	Re: 1972 Chevy Crew Cab “Denali” Looking amazing Clayton! Keep up the great work bud __________________ WTB 71-72 Original paint Medium Red hood WTB 1972 Very nice original Parchment seat belt set

12-21-2020, 08:44 AM	#86
ShortbedClayton Senior Member Join Date: Aug 2018 Location: Lancaster,PA Posts: 694	More rust repair work up front. Got all cut out and ended up being worse than I originally thought but still no big deal.. got a floor patch in along with new front support, lower kick panel patch and the lower section of the A piller..Also got the rocker installed. Not 100% pleased with aftermarket rocker fitment but got it best I could. Moved onto the 4th door area and modified 2 drivers side rockers becuse I had to form the front part to accept the new B pillar. Tried to keep it as factory looking in that area as possible and I’m happy with the result. Just have to do a rocker backing piece yet and the drivers side is about done.. Posted via Mobile Device Attached Images

12-23-2020, 07:40 PM	#87
Bones72Super Registered User Join Date: Sep 2017 Location: Lake Travis,Texas Posts: 769	Re: 1972 Chevy Crew Cab “Denali” Very nice work as always, looks great __________________ WTB 71-72 Original paint Medium Red hood WTB 1972 Very nice original Parchment seat belt set

12-23-2020, 11:18 PM	#88
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,173	Re: 1972 Chevy Crew Cab “Denali” amazing work! ive always wanted one of these crew cabs...love those renderings __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

12-29-2020, 08:10 AM	#89
ShortbedClayton Senior Member Join Date: Aug 2018 Location: Lancaster,PA Posts: 694	Spent the Christmas vacation in the garage but took a break from cab floor repairs.. Since I’m installing bucket seats and console in this truck I decided that I didn’t want my passenger seat solid mounted like a single cab truck but instead I’ll solid mount the rear bench seat. So I took some junkyard find 1972 k5 drivers side seat tracks and cut them apart. Grinding rivets off the seat mount pedestals. Welded holes shut in the slide rail. Next I had to reverse everything to the opposite side on the latch rail piece. Had to bend up a piece of 12 ga. steel for the angle. Where the adjuster lever connects. I made a few errors along the way but that’s metal work. Grinder fixed that. My tracks were missing the engagement latch piece that goes thru the tracks and latches in the notches so I had to get a set out of bench seat tracks. Surprisingly they are different so I again had to weld them up and regrind the notches..lastly was the engagement lever. I think I cut it 5 times and flipped stuff heated and bent the handle part. That’s was the hardest bit of it all. Also welded a new foot on the one as it was rotted away. After 15 hours I have passenger side adjustable bucket seat tracks mirrored of the drivers side. Next it to get mounted to floor with necessary reinforcement plates.. Posted via Mobile Device Attached Images

12-29-2020, 08:11 AM	#90
ShortbedClayton Senior Member Join Date: Aug 2018 Location: Lancaster,PA Posts: 694	A few more pics. Was so into making them I didn’t take many progress pics.. Posted via Mobile Device Attached Images

12-29-2020, 09:33 AM	#91
TA_C10 Registered User Join Date: Jun 2018 Location: Texas Posts: 1,353	Re: 1972 Chevy Crew Cab “Denali” Very nice. __________________ TA_C10 Stage 1 build - http://67-72chevytrucks.com/vboard/s....php?p=8333444 "It's only money".

12-29-2020, 07:52 PM	#92
72 tigger Senior Member Join Date: Apr 2008 Location: Berne IN Posts: 3,240	Re: 1972 Chevy Crew Cab “Denali” Good idea, nice fabrication __________________ 71 C10 72 K20 72 K10 Super Kirk

12-30-2020, 09:02 PM	#93
Bones72Super Registered User Join Date: Sep 2017 Location: Lake Travis,Texas Posts: 769	Re: 1972 Chevy Crew Cab “Denali” I got some buckets that will great in there __________________ WTB 71-72 Original paint Medium Red hood WTB 1972 Very nice original Parchment seat belt set

01-12-2021, 01:02 PM	#95
ShortbedClayton Senior Member Join Date: Aug 2018 Location: Lancaster,PA Posts: 694	Finished up the last rocker and backing plate on the passenger side. Now the cab is almost completed gotta tidy some things up yet with some extra holes. Got the trans tunnel cut out as well so it’s officially 4wd! Ordered all the trim for this build as well so now it’s time to start hanging sheet metal so I can get the trim layer out. Posted via Mobile Device Attached Images

01-12-2021, 01:05 PM	#96
ShortbedClayton Senior Member Join Date: Aug 2018 Location: Lancaster,PA Posts: 694	Picked up some goodies this past weekend for the ole girl. Had the truck rolled outside for the first time in 2021. Working on mock up now. Moved the engine crossmember foreward 2”. Also replaced the front most crossmember as mine was bent.. set the big block in with new poly mounts and fits snug as a rug. Posted via Mobile Device Attached Images

01-12-2021, 01:07 PM	#97
ShortbedClayton Senior Member Join Date: Aug 2018 Location: Lancaster,PA Posts: 694	Got the transmission and transfer case bolted up under as well so I could relocate the trans crossmember. Went ahead and installed a skid plate I made off an original one. Installed the secondary crossmember for that as well. Think I’m gonna stick two more crossmembers back the frame where my splice and addition is.. Posted via Mobile Device Attached Images



Register or Log In To remove these advertisements.

01-12-2021, 01:26 PM	#98
Custom 68 Registered User Join Date: Nov 2001 Location: Springfield, MO Posts: 2,938	Re: 1972 Chevy Crew Cab “Denali” That is looking amazing. You are doing some fine work for sure! Dave __________________ Dave 1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap 1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?) "A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome". "If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"

01-12-2021, 01:34 PM	#100
ShortbedClayton Senior Member Join Date: Aug 2018 Location: Lancaster,PA Posts: 694	Picked up all the sheet metal for my shortbed. With so much metal work involved with this crew cab conversion I kinda burnt myself out in that department so I went ahead with aftermarket bed parts. So far with minimal altercations it seems to be fitting up decent and there is zero rust to fix which makes me happy. Posted via Mobile Device Attached Images

Register or Log In To remove these advertisements.