progress pictures - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Hart_Rod** · 04-22-2006, 07:09 PM

As nice as that looks, are you sure you're going to wanna fire it up?!

texascowboy593 · 04-22-2006, 07:16 PM

Sweet... that's all I can say... Sweet!!!

71/454 · 04-22-2006, 07:24 PM

Just curious, are you running a power brake booster? Do your valve covers fit ok, they are "tall" ones right? Do you have the motor lowered as well? I'm curious because I want to run a set of tall covers on my bbc so I can run rollers and am concerned about clearance. By the way really really nice work.

*72CSTC5* · 04-22-2006, 07:25 PM

Dude slow down a little bit, you are making the rest of us look really bad. LOL!! Looking good, great progress.

mike nutt · 04-23-2006, 07:46 AM

Quote:

Originally Posted by 71/454

Just curious, are you running a power brake booster? Do your valve covers fit ok, they are "tall" ones right? Do you have the motor lowered as well? I'm curious because I want to run a set of tall covers on my bbc so I can run rollers and am concerned about clearance. By the way really really nice work.

71/454 , i'm not running power brakes, the 11" boaster will not clear the valve covers. a 7" or 8" boaster would work . my motor sit a little higher than stock with the z"d frame and lowered motor.

71/454 · 04-23-2006, 08:49 PM

Thanks. Was just about to buy the covers too!

djracer · 04-23-2006, 10:55 PM

looks sweet mike!

bcubed · 05-12-2006, 04:22 PM

Looks good Mike, alot different since the last time I saw it. Really like those valve covers and the Boyd wheels look great on it

mike nutt · 05-26-2006, 09:30 PM

heres a few more pictures of progress , fuel system , exaust ,pulleys , brackets , etc

mike nutt · 05-26-2006, 09:39 PM

more pics

shifty · 05-26-2006, 11:08 PM

wow. that is looking seeeeriously sweet!

glock35ipsc · 05-26-2006, 11:21 PM

Wow, I dig that bulkhead fitting in the frame for the fuel line. That whole thing looks fantastic, great work!

Jerry Jones · 05-26-2006, 11:46 PM

Oh my golly, she are purdy.

mike nutt · 05-27-2006, 07:08 AM

thanks guys, hope to have the core support and radiator mounted over the long weekend and maybe even crank the engine. i'll keep you posted.

68 short step · 05-29-2006, 12:48 PM

looks good... on your trans cooler, is that gonna be enough cooling where its mounted? i was thinking of doing something like this and just wanna be sure it gets enough air flow and im not prematurely killing my trans... have you done this postion befor and it worked? again thats a sweet job you're doing

djracer · 05-29-2006, 04:51 PM

Looking good Mike!

I would run a temp gauge for sure on that tranny! I have the same type cooler setup on the drag truck and it gets pretty warm!

mike nutt · 05-29-2006, 07:21 PM

Quote:

Originally Posted by 68 short step

looks good... on your trans cooler, is that gonna be enough cooling where its mounted? i was thinking of doing something like this and just wanna be sure it gets enough air flow and im not prematurely killing my trans... have you done this postion befor and it worked? again thats a sweet job you're doing

i have not ran this set up on the trans cooler before, but have talked to a few guys that run this set up on street cars without a problem, i will also run a temp guage.also this truck is not a daily driver. dj racer runs this on his drag truck, but that is an all out drag truck.if it is not enough cooler i will change to cooler with a mounted fan in the same location.

kansas city cheyenne · 05-29-2006, 07:41 PM

wow. I cant wait to see it when its completely done, it looks good so far.

mike nutt · 06-18-2006, 04:30 PM

got a little more done on the truck. got the core support mounted also fabbed up the fan shroud and mounted the electric fans along with the radiator hold down. also got all the unneeded holes in the firewall welded up , still have to do bodywork on the firewall and pull shroud and rad hold down back out to paint. here's a few pics.

ChevyDude · 06-18-2006, 05:38 PM

Just awesome!!! Great job...thanks for the pics!!!

Frizzle Fry · 06-18-2006, 06:14 PM

Looking good!

corn · 06-18-2006, 07:45 PM

Looking great! Keep the updates rollin in. I really like the valve cover treatment & Im running the same intake on my 396...

Bob Moore · 06-18-2006, 09:06 PM

Who makes the valve covers and whats the part #?

Thanks - Bob

68 short step · 06-18-2006, 11:05 PM

nice job. keep it comein

djracer · 06-18-2006, 11:28 PM

Looks even sweeter in person! Lookin Good Mike! No More Lazt Days like today! I'm ready to go for a ride!

Kevin

04-22-2006, 07:09 PM	#76
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,860	Re: progress pictures As nice as that looks, are you sure you're going to wanna fire it up?! __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

04-22-2006, 07:16 PM	#77
texascowboy593 Registered User Join Date: Dec 2004 Location: Southeast Tx Posts: 1,302	Re: progress pictures Sweet... that's all I can say... Sweet!!! __________________ "The rays of light thru the Shiner Bock bottle make me wanna turn the key and put down the throttle...and get lost down 35" - Jason Boland www.YouTube.com/user/593Films - Watch My Videos! 1977 Silverado K10 2014 Dodge Durango (Wife-mobile) 2008 Dodge Ram Lone Star Edition (Daily driver)

04-22-2006, 07:24 PM	#78
71/454 Turbo Guy Join Date: Jan 2005 Location: Calgary Alberta Posts: 353	Re: progress pictures Just curious, are you running a power brake booster? Do your valve covers fit ok, they are "tall" ones right? Do you have the motor lowered as well? I'm curious because I want to run a set of tall covers on my bbc so I can run rollers and am concerned about clearance. By the way really really nice work.

04-22-2006, 07:25 PM	#79
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,524	Re: progress pictures Dude slow down a little bit, you are making the rest of us look really bad. LOL!! Looking good, great progress.

04-23-2006, 08:49 PM	#81
71/454 Turbo Guy Join Date: Jan 2005 Location: Calgary Alberta Posts: 353	Re: progress pictures Thanks. Was just about to buy the covers too!

04-23-2006, 10:55 PM	#82
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: progress pictures looks sweet mike! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

05-12-2006, 04:22 PM	#83
bcubed Registered User Join Date: Nov 2002 Location: Wetumpka, AL Posts: 147	Re: progress pictures Looks good Mike, alot different since the last time I saw it. Really like those valve covers and the Boyd wheels look great on it __________________ Bill 2000 Bagged Silverado 1978 Chevy Malibu 1955 Apache Stepside (someday)

05-26-2006, 09:30 PM	#84
mike nutt 69fatmotor Join Date: Oct 2005 Location: bama Posts: 660	Re: progress pictures heres a few more pictures of progress , fuel system , exaust ,pulleys , brackets , etc Last edited by mike nutt; 02-22-2009 at 08:55 PM.

05-26-2006, 09:39 PM	#85
mike nutt 69fatmotor Join Date: Oct 2005 Location: bama Posts: 660	Re: progress pictures more pics Last edited by mike nutt; 02-22-2009 at 08:55 PM.

05-26-2006, 11:08 PM	#86
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,376	Re: progress pictures wow. that is looking seeeeriously sweet! __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

05-26-2006, 11:21 PM	#87
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: progress pictures Wow, I dig that bulkhead fitting in the frame for the fuel line. That whole thing looks fantastic, great work! __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

05-26-2006, 11:46 PM	#88
Jerry Jones Happy Camper Join Date: Feb 2006 Location: Northern California Posts: 8,408	Re: progress pictures Oh my golly, she are purdy. __________________ RIP El Jay! Love you brother!

05-27-2006, 07:08 AM	#89
mike nutt 69fatmotor Join Date: Oct 2005 Location: bama Posts: 660	Re: progress pictures thanks guys, hope to have the core support and radiator mounted over the long weekend and maybe even crank the engine. i'll keep you posted.

05-29-2006, 12:48 PM	#90
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: progress pictures looks good... on your trans cooler, is that gonna be enough cooling where its mounted? i was thinking of doing something like this and just wanna be sure it gets enough air flow and im not prematurely killing my trans... have you done this postion befor and it worked? again thats a sweet job you're doing

05-29-2006, 04:51 PM	#91
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: progress pictures Looking good Mike! I would run a temp gauge for sure on that tranny! I have the same type cooler setup on the drag truck and it gets pretty warm! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!



Register or Log In To remove these advertisements.

05-29-2006, 07:41 PM	#93
kansas city cheyenne Rebuilding 1 at a time Join Date: May 2006 Location: kansas city, mo Posts: 80	Re: progress pictures wow. I cant wait to see it when its completely done, it looks good so far. __________________ 71 cheyenne lwb 383 stroker 2004R tranny Factory ps, pb, air http://smg.photobucket.com/albums/v3...t=101_0059.jpg 66 Nova SS L-79 327 m21 http://smg.photobucket.com/albums/v3...t=101_0042.jpg

06-18-2006, 04:30 PM	#94
mike nutt 69fatmotor Join Date: Oct 2005 Location: bama Posts: 660	Re: progress pictures got a little more done on the truck. got the core support mounted also fabbed up the fan shroud and mounted the electric fans along with the radiator hold down. also got all the unneeded holes in the firewall welded up , still have to do bodywork on the firewall and pull shroud and rad hold down back out to paint. here's a few pics. Last edited by mike nutt; 02-22-2009 at 08:54 PM.

06-18-2006, 05:38 PM	#95
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: progress pictures Just awesome!!! Great job...thanks for the pics!!!

06-18-2006, 06:14 PM	#96
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: progress pictures Looking good!

06-18-2006, 07:45 PM	#97
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: progress pictures Looking great! Keep the updates rollin in. I really like the valve cover treatment & Im running the same intake on my 396...

06-18-2006, 09:06 PM	#98
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: progress pictures Who makes the valve covers and whats the part #? Thanks - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

06-18-2006, 11:05 PM	#99
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: progress pictures nice job. keep it comein

06-18-2006, 11:28 PM	#100
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: progress pictures Looks even sweeter in person! Lookin Good Mike! No More Lazt Days like today! I'm ready to go for a ride! Kevin __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

Register or Log In To remove these advertisements.