Project Old Blue, 1965 C10, Rebuild Version 2010

[Jmorales3181]

Sorry to see your truck had been vandalized it looked really clean.... Haters!
Atleast you have a second chance to do it all over again. Read the build you are doing with your son too! Love seeing father son builds. Keep at it man!
Posted via Mobile Device

[TJ's Chevy]

Truck is nice!

[aggie91]

Just thought I would say this truck is still waiting its turn. I hope to get at it again after the first of the year. Need to sell a couple of vehicles though...

My plan is to get it running and driving before touching any of the body work. I believe I have everything I need to do that except for a drive shaft. I will most likely get a new one made locally. I still need to finish some of the fab work on the rear suspension, especially the shock mounts.

Hope everyone has a Merry Christmas and a Happy New Year! I have only 8 more working days this year!! Then I am off till the 6th of January!

[SCOTI]

We'll wait.... Happy Holidays!

[aggie91]

Scoti - you need to get back to work on your '64 too!

[SCOTI]

Originally Posted by aggie91

Scoti - you need to get back to work on your '64 too!

I'm 1 panhard bar & rear end mount away from finishing fab work on my dually. Rattle can everything, install bed, & finish back half of exhaust. Looks like I'll ressurect the 64 build/thread in the spring.

[Low Elco]

You're as bad as I am- gotta get all the kid stuff outta the way before I can get on mine! Glad to hear it's going under the knife!

[cl08]

Karl, glad to know I anit the only East Texas yokel on the broad. Only thing I know about Longview, is Eastman Chemical via working there 3+ years. Tyler to Longview drive got old FAST!!!!
Your truck will get its day. At least you have a project with good history and passing it on to your sons. My grand dads '82 was stolen never to be seen again ( he had a '60 f100 but that was not my taste in truck)... But I am glad it was stolen honestly, it prevented a huge fight among the 6 grandsons...
Merry Christmas to you and yours from right down the road!!!

[aggie91]

Originally Posted by cl08

Karl, glad to know I anit the only East Texas yokel on the broad. Only thing I know about Longview, is Eastman Chemical via working there 3+ years. Tyler to Longview drive got old FAST!!!!
Your truck will get its day. At least you have a project with good history and passing it on to your sons. My grand dads '82 was stolen never to be seen again ( he had a '60 f100 but that was not my taste in truck)... But I am glad it was stolen honestly, it prevented a huge fight among the 6 grandsons...
Merry Christmas to you and yours from right down the road!!!

I grew up in Tyler and my sister and her family still live there. I work at the other large manufacturing company in Longview, Joy Global, it use to be LeTourneau Technologies. Some of my co-workers live in Tyler and Bullard too...

[cl08]

Well I am born and raised Chapel Hill. Joy Global is unknown to me. I am pipe designer so that's how I got in Eastman.
Get on the truck when you can Id like join the build ranks someday!!!

[aggie91]

Quick post here...Somethings have happened lately that may result in this project getting some attention soon...

Waiting to see the outcome of another issue, but it go the way I think it will, we will be making some changes and working on this one...

[SCOTI]

Originally Posted by aggie91

Quick post here...Somethings have happened lately that may result in this project getting some attention soon...

Waiting to see the outcome of another issue, but it go the way I think it will, we will be making some changes and working on this one...

So cryptic.....

[McMurphy]

Your business getting off the ground? Whatever it is, I hope it is a darn good thing, and we get to see more of your build !!!

Good Luck !

[Low Elco]

Well, I hope it's ok....

[aggie91]

Originally Posted by SCOTI

So cryptic.....

Yeah, I did not want to let the word out yet as the plan is not set in stone yet...

Originally Posted by McMurphy

Your business getting off the ground? Whatever it is, I hope it is a darn good thing, and we get to see more of your build !!!

Good Luck !

I shut down my business last year, my full time job did not let me do what I needed for it to be successful. It will be a good thing for someone....

Originally Posted by Low Elco

Well, I hope it's ok....

Its all OK at this point, just waiting for the final decision from the powers that be...

Thanks for checking in guys!

[aggie91]

I did not think it was going to take this long to get the decision made to be able to move forward. Its been 4 weeks and still not resolved...

In the mean time, I have been collecting parts and looking for parts that I need. I am on the fence about a couple of parts at this point. One of which is the frame. Since this truck is mostly original to the way it came from my Grandpa, I am reluctant to cut up the frame for a few mods I want to make that would be hard to change back later.

I found a complete LWB frame and suspension for about $200, but I would have to drive 3.5 hours to get it. It solves the frame mod issue and gets me a 12 bolt housing that I do not have. What do you guys think? The mods are basically, raise the front crossmember like it did in Korbin's truck, do a rear frame mod to raise the rails up 4" like Rob did to his shop truck JT, and then do the LWB to SWB conversion. Once all that would be done, I would get (or build) an X brace around the trailing arm suspension like I have seen Porterbuilt make....

The end result for the exterior will be a shop truck theme in the original light blue with a white grill and bumper and this logo on the doors in white:


That is the farm that my family has and where I learned to drive that truck before Grandpa gave it to me. The farm has been in our family for 164 years and my sister and I are now the 5th or 6th generation owners.

[SCOTI]

Originally Posted by aggie91

I did not think it was going to take this long to get the decision made to be able to move forward. Its been 4 weeks and still not resolved...

In the mean time, I have been collecting parts and looking for parts that I need. I am on the fence about a couple of parts at this point. One of which is the frame. Since this truck is mostly original to the way it came from my Grandpa, I am reluctant to cut up the frame for a few mods I want to make that would be hard to change back later.

I found a complete LWB frame and suspension for about $200, but I would have to drive 3.5 hours to get it. It solves the frame mod issue and gets me a 12 bolt housing that I do not have. What do you guys think? The mods are basically, raise the front crossmember like it did in Korbin's truck, do a rear frame mod to raise the rails up 4" like Rob did to his shop truck JT, and then do the LWB to SWB conversion. Once all that would be done, I would get (or build) an X brace around the trailing arm suspension like I have seen Porterbuilt make....

The end result for the exterior will be a shop truck theme in the original light blue with a white grill and bumper and this logo on the doors in white:


That is the farm that my family has and where I learned to drive that truck before Grandpa gave it to me. The farm has been in our family for 164 years and my sister and I are now the 5th or 6th generation owners.

Pending your timeline, I might be able to help you on the chassis/rearend dilemma all @ once. We should talk again....

[aggie91]

Originally Posted by SCOTI

Pending your timeline, I might be able to help you on the chassis/rearend dilemma all @ once. We should talk again....

We went up to GG's at TMS on Saturday, saw Tiffany but missed Keith, not sure if you where there or not, if so sorry we missed catching up. Not sure if my current budget will allow me to "fix" my dilemma all @ once..LOL.

I did find a complete rear end housing with trailing arms and stock springs and all the retainers and bolts for $100 bucks from a guy in Hurst. We picked it up on Sat. on our way back home. I got the housing all stripped down minus taking out the pinion on Sunday. I will try to post some pictures in the next day or two. One brake drum was completely worn through! it came off in two pieces...

[SCOTI]

Originally Posted by aggie91

I did find a complete rear end housing with trailing arms and stock springs and all the retainers and bolts for $100 bucks from a guy in Hurst. We picked it up on Sat. on our way back home. I got the housing all stripped down minus taking out the pinion on Sunday. I will try to post some pictures in the next day or two. One brake drum was completely worn through! it came off in two pieces...

Put me 1st in line for the old 9" housing.

[aggie91]

Originally Posted by SCOTI

Put me 1st in line for the old 9" housing.

OK

You planning on going over to Pate Swap Meet this year? I am going for Saturday for sure, but might try to make it Friday-Sunday if the wife lets me..

[gimmy 64]

I think Grandpa would be fine doing what ever you do with the truck as long as you keep it. build it the way YOU want

[aggie91]

Thanks guys, I will be doing it for ME, but I think to honor him and the trucks life on the farm, this idea is what I will end up with...

[NEWFISHER]

I really like the logo and the fact your family has had the ranch so long. Cool story , cool truck!

[Low Elco]

Glad things are going well. Hope you get what you need.

[aggie91]

Cleared another hurdle this weekend on my way to getting my stuff in order around my house to make room for working on this one. "Bubba" got sold and will be delivered to the new owner the weekend of April 12th. My parts collection is growing for this one and looks like I am down to just a few items to get it running and on the road (no rust repair or paint and body at this time).