Suburban K20 1986 Silverado - "Silvester" - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kikkegek · 07-12-2011, 03:55 AM

thanks man! thats what I fugured!

kikkegek · 07-19-2011, 03:24 PM

a buddy of mine offered to put the Burb in his garage during painting! very cool of him.

since I am inside I figured i do some more stuff
repaired a hole in the rear fender.
repaired some rust and holes in the cargo door

and making some progress

it now has 4 layers of white on top. finally no red coming through.
I have one coat of black on and need one more. the black covers like the best. allmost in one coat.

I need to take the rear bumper off to paint the red thing between the bumper and the chassis.

it looks kinda nice without the running boards. I might not put them back on.

I do need a step of some kind so grandma can get in the car. any ideas?

motornut · 07-19-2011, 04:12 PM

thats cool
sure looks white on top now
black looks good too

kikkegek · 07-22-2011, 06:56 PM

outside is finished!

thirdstreettito · 07-22-2011, 10:05 PM

Looks really good!

kikkegek · 07-23-2011, 06:39 AM

thanks man!
yeah, came out pretty nice!

kikkegek · 07-24-2011, 03:19 PM

hopefully fixed a leaking radiatorconnection by putting some good old JB Weld on there. first of course cleaned it very thoroughly...

kikkegek · 07-25-2011, 02:26 PM

damnit! I let the JB Weld dry overnight 20:00 till 8:30h in the morning, but it started leaking again today.

So I have let it dry for 12,5hours, but that is probably not enough......

I'll fix it again tonight and let it sit for 36hours. hopefully its solved then...because I would hate to take the complete rad out, because I think the tranny cooler is also in there.

is it hard to disconnect and then reconnect the tranny cooler?

motornut · 07-26-2011, 09:43 AM

Quote:

Originally Posted by kikkegek

outside is finished!

looks good finished !

motornut · 07-26-2011, 09:57 AM

Quote:

Originally Posted by kikkegek

damnit! I let the JB Weld dry overnight 20:00 till 8:30h in the morning, but it started leaking again today.

So I have let it dry for 12,5hours, but that is probably not enough......

I'll fix it again tonight and let it sit for 36hours. hopefully its solved then...because I would hate to take the complete rad out, because I think the tranny cooler is also in there.

is it hard to disconnect and then reconnect the tranny cooler?

it dosn't look like there is an external cooler(usally out front of regular rad)
no pressure when not running
so just the two lines (yellow)undo
and i baggie the ends so they don't drip and just a strip of duck tape over the tranny fittings on the rad to lift it out
when i've used the JB i've found more thinner coats work better
but havn't used it on a rad

kikkegek · 07-26-2011, 01:15 PM

thanks man! I applied JB again yesterday and I am now letting it rest for 36h before starting the engine again. If it doesnt work, then I will probably take the rad out and solder it outside the engine bay

TheApocalyptican · 07-26-2011, 01:54 PM

How good does the paint job look up close? It looks great in the pictures!

68Timber · 07-26-2011, 02:53 PM

Looks great! Needs some black wheels now.

kikkegek · 07-26-2011, 03:25 PM

Quote:

Originally Posted by TheApocalyptican

How good does the paint job look up close? It looks great in the pictures!

thanks man!

it has some orangepeel, but I kinda like it like that. rough car, rough paint...

@Bruiser: yeah, when the chrome runs out on these boys, I'll have m powdercoated black...that will look sweet!

kikkegek · 08-02-2011, 07:13 AM

Nice photo today at the beach in Scheveningen, Netherlands!

kikkegek · 08-14-2011, 03:47 PM

I changed the original radiator for a Spectra Prenium CU730...

was a b1tch to fit, what should be a bolt-in-replacement, became a supercustom-replacement...the rad was thicker and high then the original...

Rubbers didnt fit, top radiator brackets didnt fit...etc.....

ejn74 · 08-16-2011, 07:16 PM

Nice looking truck paint and radiator look good!

motornut · 08-18-2011, 09:56 AM

yup looks good should work well

kikkegek · 08-20-2011, 07:42 AM

took the eco-module of the firewall today. I also tried to remove a lot of the smog wiring, because all the smog stuff is gone. But they all run to the back of the engine and I cant see where they go. Can I just cut these babys?

all the connectors are (when facing the engine bay from the front) to the left of the engine and run to the left rear side into a wire protection plastic hose...

kikkegek · 10-01-2011, 01:48 PM

I replaced the seal of the valve covers and gave them a paintjob.

and finally mounted the sunvisor on the Burb

89Suburban · 10-01-2011, 02:15 PM

This has been a very interesting thread. I like that tach on the left, the led's in the guages. Visor makes a big difference. The new radiator is very nice looking. Did the truck come with those dual batteries? Was this truck orginally a diesel? I will be roller painting the bottom half of my truck when the time comes.

kikkegek · 10-01-2011, 04:35 PM

Quote:

Originally Posted by 89Suburban

This has been a very interesting thread. I like that tach on the left, the led's in the guages. Visor makes a big difference. The new radiator is very nice looking. Did the truck come with those dual batteries? Was this truck orginally a diesel? I will be roller painting the bottom half of my truck when the time comes.

thanks man! No I have no clue why it has dual batteries. I bought it like that and changed both old batteries for new ones. I guess the previous owner was a big user (hahaha)....

str8axle55 · 10-01-2011, 10:57 PM

My 86 gas also came with dual batteries, it was an option. The paint looks very nice. i was thinking about doing mine black in the middle w/a roller.

motornut · 10-04-2011, 09:46 AM

Quote:

Originally Posted by kikkegek

I replaced the seal of the valve covers and gave them a paintjob.

and finally mounted the sunvisor on the Burb

visor looks great i may do mine yet
Vcovers look nice and new again

kikkegek · 10-16-2011, 08:04 AM

Installed a second hand Analog MSD 6AL (6420) in my car last night.

cars runs fine. I am not sure if I am noticing any difference from the stock setup with the HEI ignition.

I'll check my mpg this week and see if it helps any...

07-12-2011, 03:55 AM	#76
kikkegek Registered User Join Date: Aug 2010 Location: Netherlands, The Hague Posts: 1,518	Re: Suburban K20 1986 Silverado thanks man! thats what I fugured! __________________ My dreamride / project:1977 GMC C15 Suburban In storage: Monster - 1974 GMC Suburban 25hundred Sold : Chevrolet Suburban K20 Silverado 1986 Guide: real HID projectors for 4x6 headlights link: DIY LED TAILLIGHTS

07-19-2011, 03:24 PM	#77
kikkegek Registered User Join Date: Aug 2010 Location: Netherlands, The Hague Posts: 1,518	Re: Suburban K20 1986 Silverado a buddy of mine offered to put the Burb in his garage during painting! very cool of him. since I am inside I figured i do some more stuff repaired a hole in the rear fender. repaired some rust and holes in the cargo door and making some progress it now has 4 layers of white on top. finally no red coming through. I have one coat of black on and need one more. the black covers like the best. allmost in one coat. I need to take the rear bumper off to paint the red thing between the bumper and the chassis. it looks kinda nice without the running boards. I might not put them back on. I do need a step of some kind so grandma can get in the car. any ideas? __________________ My dreamride / project:1977 GMC C15 Suburban In storage: Monster - 1974 GMC Suburban 25hundred Sold : Chevrolet Suburban K20 Silverado 1986 Guide: real HID projectors for 4x6 headlights link: DIY LED TAILLIGHTS

07-19-2011, 04:12 PM	#78
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: Suburban K20 1986 Silverado thats cool sure looks white on top now black looks good too __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350

07-22-2011, 06:56 PM	#79
kikkegek Registered User Join Date: Aug 2010 Location: Netherlands, The Hague Posts: 1,518	Re: Suburban K20 1986 Silverado outside is finished! __________________ My dreamride / project:1977 GMC C15 Suburban In storage: Monster - 1974 GMC Suburban 25hundred Sold : Chevrolet Suburban K20 Silverado 1986 Guide: real HID projectors for 4x6 headlights link: DIY LED TAILLIGHTS

07-22-2011, 10:05 PM	#80
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: Suburban K20 1986 Silverado Looks really good! __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

07-23-2011, 06:39 AM	#81
kikkegek Registered User Join Date: Aug 2010 Location: Netherlands, The Hague Posts: 1,518	Re: Suburban K20 1986 Silverado thanks man! yeah, came out pretty nice! __________________ My dreamride / project:1977 GMC C15 Suburban In storage: Monster - 1974 GMC Suburban 25hundred Sold : Chevrolet Suburban K20 Silverado 1986 Guide: real HID projectors for 4x6 headlights link: DIY LED TAILLIGHTS

07-24-2011, 03:19 PM	#82
kikkegek Registered User Join Date: Aug 2010 Location: Netherlands, The Hague Posts: 1,518	Re: Suburban K20 1986 Silverado hopefully fixed a leaking radiatorconnection by putting some good old JB Weld on there. first of course cleaned it very thoroughly... __________________ My dreamride / project:1977 GMC C15 Suburban In storage: Monster - 1974 GMC Suburban 25hundred Sold : Chevrolet Suburban K20 Silverado 1986 Guide: real HID projectors for 4x6 headlights link: DIY LED TAILLIGHTS

07-25-2011, 02:26 PM	#83
kikkegek Registered User Join Date: Aug 2010 Location: Netherlands, The Hague Posts: 1,518	Re: Suburban K20 1986 Silverado damnit! I let the JB Weld dry overnight 20:00 till 8:30h in the morning, but it started leaking again today. So I have let it dry for 12,5hours, but that is probably not enough...... I'll fix it again tonight and let it sit for 36hours. hopefully its solved then...because I would hate to take the complete rad out, because I think the tranny cooler is also in there. is it hard to disconnect and then reconnect the tranny cooler? __________________ My dreamride / project:1977 GMC C15 Suburban In storage: Monster - 1974 GMC Suburban 25hundred Sold : Chevrolet Suburban K20 Silverado 1986 Guide: real HID projectors for 4x6 headlights link: DIY LED TAILLIGHTS

07-26-2011, 01:15 PM	#86
kikkegek Registered User Join Date: Aug 2010 Location: Netherlands, The Hague Posts: 1,518	Re: Suburban K20 1986 Silverado thanks man! I applied JB again yesterday and I am now letting it rest for 36h before starting the engine again. If it doesnt work, then I will probably take the rad out and solder it outside the engine bay __________________ My dreamride / project:1977 GMC C15 Suburban In storage: Monster - 1974 GMC Suburban 25hundred Sold : Chevrolet Suburban K20 Silverado 1986 Guide: real HID projectors for 4x6 headlights link: DIY LED TAILLIGHTS

07-26-2011, 01:54 PM	#87
TheApocalyptican Registered User Join Date: Jun 2010 Location: Las Vegas, Nv Posts: 312	Re: Suburban K20 1986 Silverado How good does the paint job look up close? It looks great in the pictures! __________________ 1995 Suburban K2500 454.....off road & towing 1999 Astro, work van 2006 Silverado 2wd 5.3 w/4.5" lift and 33s

07-26-2011, 02:53 PM	#88
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: Suburban K20 1986 Silverado Looks great! Needs some black wheels now. __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

08-02-2011, 07:13 AM	#90
kikkegek Registered User Join Date: Aug 2010 Location: Netherlands, The Hague Posts: 1,518	Re: Suburban K20 1986 Silverado Nice photo today at the beach in Scheveningen, Netherlands! __________________ My dreamride / project:1977 GMC C15 Suburban In storage: Monster - 1974 GMC Suburban 25hundred Sold : Chevrolet Suburban K20 Silverado 1986 Guide: real HID projectors for 4x6 headlights link: DIY LED TAILLIGHTS

08-14-2011, 03:47 PM	#91
kikkegek Registered User Join Date: Aug 2010 Location: Netherlands, The Hague Posts: 1,518	Re: Suburban K20 1986 Silverado I changed the original radiator for a Spectra Prenium CU730... was a b1tch to fit, what should be a bolt-in-replacement, became a supercustom-replacement...the rad was thicker and high then the original... Rubbers didnt fit, top radiator brackets didnt fit...etc..... __________________ My dreamride / project:1977 GMC C15 Suburban In storage: Monster - 1974 GMC Suburban 25hundred Sold : Chevrolet Suburban K20 Silverado 1986 Guide: real HID projectors for 4x6 headlights link: DIY LED TAILLIGHTS

08-16-2011, 07:16 PM	#92
ejn74 Registered User Join Date: Nov 2010 Location: Southwest Iowa Posts: 106	Re: Suburban K20 1986 Silverado Nice looking truck paint and radiator look good! __________________ Life is short, Live each day as a new day and keep on Truckin!

08-18-2011, 09:56 AM	#93
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: Suburban K20 1986 Silverado yup looks good should work well __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350



Register or Log In To remove these advertisements.

08-20-2011, 07:42 AM	#94
kikkegek Registered User Join Date: Aug 2010 Location: Netherlands, The Hague Posts: 1,518	Re: Suburban K20 1986 Silverado took the eco-module of the firewall today. I also tried to remove a lot of the smog wiring, because all the smog stuff is gone. But they all run to the back of the engine and I cant see where they go. Can I just cut these babys? all the connectors are (when facing the engine bay from the front) to the left of the engine and run to the left rear side into a wire protection plastic hose... __________________ My dreamride / project:1977 GMC C15 Suburban In storage: Monster - 1974 GMC Suburban 25hundred Sold : Chevrolet Suburban K20 Silverado 1986 Guide: real HID projectors for 4x6 headlights link: DIY LED TAILLIGHTS

10-01-2011, 01:48 PM	#95
kikkegek Registered User Join Date: Aug 2010 Location: Netherlands, The Hague Posts: 1,518	Re: Suburban K20 1986 Silverado I replaced the seal of the valve covers and gave them a paintjob. and finally mounted the sunvisor on the Burb __________________ My dreamride / project:1977 GMC C15 Suburban In storage: Monster - 1974 GMC Suburban 25hundred Sold : Chevrolet Suburban K20 Silverado 1986 Guide: real HID projectors for 4x6 headlights link: DIY LED TAILLIGHTS

10-01-2011, 02:15 PM	#96
89Suburban Registered User Join Date: Sep 2011 Location: King of Prussia, Pa Posts: 11	Re: Suburban K20 1986 Silverado This has been a very interesting thread. I like that tach on the left, the led's in the guages. Visor makes a big difference. The new radiator is very nice looking. Did the truck come with those dual batteries? Was this truck orginally a diesel? I will be roller painting the bottom half of my truck when the time comes. __________________ 1999 Bass Tracker Pro Team 175 - 40 HP Merc 1989 GMC Suburban V-1500/5.7 L TBI/700r4/NP241C/GM 10 Bolts

10-01-2011, 10:57 PM	#98
str8axle55 Registered User Join Date: May 2009 Location: Weymouth Ma Posts: 489	Re: Suburban K20 1986 Silverado My 86 gas also came with dual batteries, it was an option. The paint looks very nice. i was thinking about doing mine black in the middle w/a roller. __________________ 03 GMC Yukon XL 2500 Quadrasteer, wife`s DD 84 Chevy K30 CC SRW 55 Chevy 210 2dr post

10-16-2011, 08:04 AM	#100
kikkegek Registered User Join Date: Aug 2010 Location: Netherlands, The Hague Posts: 1,518	Re: Suburban K20 1986 Silverado Installed a second hand Analog MSD 6AL (6420) in my car last night. cars runs fine. I am not sure if I am noticing any difference from the stock setup with the HEI ignition. I'll check my mpg this week and see if it helps any... __________________ My dreamride / project:1977 GMC C15 Suburban In storage: Monster - 1974 GMC Suburban 25hundred Sold : Chevrolet Suburban K20 Silverado 1986 Guide: real HID projectors for 4x6 headlights link: DIY LED TAILLIGHTS

Register or Log In To remove these advertisements.