SC 1984 C10 parting out* - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Stitch* · 01-28-2010, 11:36 PM

Pic 1 - horns...could use some paint
Pic 2 - air intake dohickey for core support $5
Pic 3 - Outside mirror support braces...some surfact rust, could use paint
Pic 4 - dome light with harness and bulb
Pic 5 - close up of done light and harness plug

*Stitch* · 01-28-2010, 11:40 PM

Pic 1 - outside mirror chrome side...chrome great condition...comes with body gaskets and mounting hardware
Pic 2 - outside mirror glass side...glass good shape besides chip...glass has NO acid staining
Pic 3 - close up of chip on pass mirror
Pic 4 - radiator hold downs...mount in top of radiator support...comes with rubber bumpers on underside...could use some paint

*Stitch* · 01-28-2010, 11:43 PM

...

**old Rusty C10** · 01-30-2010, 11:50 AM

just to mention that I recieved my parts today (through prioroty mail and everything was as described, packaged well, and this is the fastest delivery ive ever gotten. The communication with Chuck was superb and the service was wonderful and Id recommend doing business with this member anytime, and will definately ask him among the first should i need more parts . THANK YOU CHUCK!

*Stitch* · 01-30-2010, 07:03 PM

Quote:

Originally Posted by old Rusty C10

just to mention that I recieved my parts today (through prioroty mail and everything was as described, packaged well, and this is the fastest delivery ive ever gotten. The communication with Chuck was superb and the service was wonderful and Id recommend doing business with this member anytime, and will definately ask him among the first should i need more parts . THANK YOU CHUCK!

thanks Bob...I appreciate that...if I can do anything else, just let me know...

btw, I'll have pics up today of the cab...I took the tanks and motor and trans out today and while I had it up on the lift, I was going to take pics of the bottom of the cab for you, but I forgot...I can tell you that I didn't see any significant surface rust, I think there's more surface rust inside the cab actually...if you really need pics up under it, I'll jack it up in the yard and take some pics...I'll post pics of the inside floor tonight later or tomorrow sometime...

I'll also get pics up of the tanks at the same time as the cab floor...thanks fellas...

*Stitch* · 01-31-2010, 07:36 PM

Pics of the cab...the dark brown stuff in the driver's floorpan by the kick panel is just gunk I haven't cleaned up yet...the pics of under the cab are alittle brighter, I did that so you could see the pictures better where it was dark...thanks...

*Stitch* · 01-31-2010, 07:39 PM

Pic 1 - one more under cab pic
Pic 2 & 3 - front suspension...could use a scuff and paint
Pic 4 - steering box with fittings intact
Pic 5 - I think this is the proportioning valve

*Stitch* · 01-31-2010, 07:44 PM

Pic 1 & 2 - inner fenders...no rust
Pic 3 - 2 core radiator w/trans cooler
Pic 4 - factory front swaybar w/ mounts-stands, factory hardware and good rubber bushings...scuff and paint
Pic 5 - 4 headlight core support

*Stitch* · 01-31-2010, 07:50 PM

These are the tank pics...everything on the tanks works like factory...I haven't gotten the harness all the way out of the truck, but it's in excellent shape...they second pic is of the switching valve...the tank brackets are in great shape also...the crossover tubing for the tanks is also available...I haven't cleaned these up yet, but they will clean up nice...also, I didn't take pictures of the filler neck surround behind the fuel door, but I have them and the hardware and it's all in excellent shape...everything will be cleaned up before the buyer receives them...I just had a long day yesterday and had some stuff do to around the house today...also, it was below freezing outside and I really didn't want to be out there...

joe231 · 01-31-2010, 07:59 PM

What do you want for the short piece of steel lines that run over the top of the passenger frame rail?

*Stitch* · 01-31-2010, 08:06 PM

pm sent Joe

joe231 · 01-31-2010, 08:23 PM

I think it may be the lines at the bottom of this pic, under the switching valve.

*Stitch* · 01-31-2010, 08:31 PM

I went out and got the lines and took a pic...have it up in a second

*Stitch* · 01-31-2010, 08:37 PM

ok here's the pic...is it the small lines or the long lines...like I said in the pm, 87bob has first dibs on any of this, but if he passes then you'll be next in line...thanks Joe

joe231 · 01-31-2010, 08:45 PM

It is the short ones.....
I'm not 100% sure those are like mine though, I'll have to look
thanks!

*Stitch* · 01-31-2010, 11:54 PM

Quote:

Originally Posted by kenm78

How much for the Tilt column with cruise and int. wipers shipped to 73020?

looks like it's going to be $24 dollars through USPS insured

so that'll be $114 total to your door insured...thanks man...just let me know...

Chuck.

gcburdic · 01-31-2010, 11:59 PM

Hi Chuck,

Wondering if you'll part with just the front steering linkage....basically I need the center link, but if it'll be easier to pull the outer/ inner tie rods, pitman arm, I'll do that.....shipping to 28031 or if you're headed to the Charlotte area or Myrtle Beach I could meet a somewhere??...Thanks Geoff

*Stitch* · 02-01-2010, 12:09 AM

let me see what I can do with getting it out alone...on May 8th, I'm going to Salisbury, NC for the Gathering of the Goofs for this site...I could bring it with me to that if that's not too far in the future for you...

I just checked and you should be less than an hour from Salisbury...you come swing by and come to the Gathering of the Goofs and get some grub too...

LOL...just checked the RSVP thread and you're on it...so you'll be there...if for some reason you don't make it, me and my family will be at the camp ground some of the day Sunday also before we head back home...

gcburdic · 02-01-2010, 12:17 AM

That would work out great for me....I'm headed there too!!!

Let me know how much Chuck....you coming to Charlotte Auto Fair in April 8-11??

*Stitch* · 02-01-2010, 12:20 AM

nope...our little boy is due to be born at the end of March, so I probably won't be leaving town until the GOTG except to goto Charleston to show him off the family...that's great that your going too...I'm excited about it...we're getting there Friday night and going to rent a cabin Friday and Saturday night...

*Stitch* · 02-02-2010, 08:52 AM

Shamil, I sent your shift indicator out yesterday...sorry for the delay...thanks for the purchase

Chuck.

Shamil · 02-02-2010, 10:57 AM

is the switch valve in good shape? how much do you need for it?

softballnrd27 · 02-02-2010, 12:36 PM

Ok here is what I need, can you give me a package and individual total and what is available:
Driveshaft
All the harware to mount the lights to the core support
Engine compartment wiring harness
Gauge bezel
Outside door locks
I am in Augusta, GA so I won't need shipping

*Stitch* · 02-02-2010, 08:03 PM

Quote:

Originally Posted by Shamil

is the switch valve in good shape? how much do you need for it?

if you're talking about the switch valve for the dual tanks, then 87bob had first dibs on it...He's supposed to be paying me this weekend for it, if he backs out, then it's yours for $15 plus shipping...he's been pretty intent on getting it, so I'm pretty sure he's going to be buying it...

*Stitch* · 02-02-2010, 08:12 PM

Quote:

Originally Posted by softballnrd27

Ok here is what I need, can you give me a package and individual total and what is available:
Driveshaft
All the harware to mount the lights to the core support
Engine compartment wiring harness
Gauge bezel
Outside door locks
I am in Augusta, GA so I won't need shipping

Driveshaft - I have still - $25

hardware for lights - I don't know exactly you want...I have the springs and the buckets that the lights mount into...the adjustment screws were toast, but they're only $2 and change for a pair of them...if there's something I'm missing let me know...$20 for springs and the mounting buckets

Engine harness - I still have - $30 - this mounts to the backside of the fusebox

headlight harness - I still have - $25

gauge bezel - I still have - $30 - this is for an A/C truck and it hasn't been cut for a cd player and has been painted silver

outside door locks - $15 - this includes two factory GM keys

Total $125 - package deal 10% off $112

let me know what you want...this stuff is going pretty fast...thanks man

Chuck.

01-28-2010, 11:36 PM	#76
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* Pic 1 - horns...could use some paint Pic 2 - air intake dohickey for core support $5 Pic 3 - Outside mirror support braces...some surfact rust, could use paint Pic 4 - dome light with harness and bulb Pic 5 - close up of done light and harness plug Attached Images

01-28-2010, 11:40 PM	#77
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* Pic 1 - outside mirror chrome side...chrome great condition...comes with body gaskets and mounting hardware Pic 2 - outside mirror glass side...glass good shape besides chip...glass has NO acid staining Pic 3 - close up of chip on pass mirror Pic 4 - radiator hold downs...mount in top of radiator support...comes with rubber bumpers on underside...could use some paint Attached Images Last edited by Stitch; 01-28-2010 at 11:40 PM.

01-28-2010, 11:43 PM	#78
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* ... Last edited by Stitch; 03-18-2010 at 06:47 PM.

01-30-2010, 11:50 AM	#79
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,307	Re: 1984 C10 parting out* just to mention that I recieved my parts today (through prioroty mail and everything was as described, packaged well, and this is the fastest delivery ive ever gotten. The communication with Chuck was superb and the service was wonderful and Id recommend doing business with this member anytime, and will definately ask him among the first should i need more parts . THANK YOU CHUCK! __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

01-31-2010, 07:36 PM	#81
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* Pics of the cab...the dark brown stuff in the driver's floorpan by the kick panel is just gunk I haven't cleaned up yet...the pics of under the cab are alittle brighter, I did that so you could see the pictures better where it was dark...thanks... Attached Images Last edited by Stitch; 01-31-2010 at 07:37 PM.

01-31-2010, 07:39 PM	#82
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* Pic 1 - one more under cab pic Pic 2 & 3 - front suspension...could use a scuff and paint Pic 4 - steering box with fittings intact Pic 5 - I think this is the proportioning valve Attached Images

01-31-2010, 07:44 PM	#83
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* Pic 1 & 2 - inner fenders...no rust Pic 3 - 2 core radiator w/trans cooler Pic 4 - factory front swaybar w/ mounts-stands, factory hardware and good rubber bushings...scuff and paint Pic 5 - 4 headlight core support Attached Images Last edited by Stitch; 01-31-2010 at 07:51 PM.

01-31-2010, 07:50 PM	#84
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* These are the tank pics...everything on the tanks works like factory...I haven't gotten the harness all the way out of the truck, but it's in excellent shape...they second pic is of the switching valve...the tank brackets are in great shape also...the crossover tubing for the tanks is also available...I haven't cleaned these up yet, but they will clean up nice...also, I didn't take pictures of the filler neck surround behind the fuel door, but I have them and the hardware and it's all in excellent shape...everything will be cleaned up before the buyer receives them...I just had a long day yesterday and had some stuff do to around the house today...also, it was below freezing outside and I really didn't want to be out there... Attached Images

01-31-2010, 07:59 PM	#85
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 1984 C10 parting out* What do you want for the short piece of steel lines that run over the top of the passenger frame rail? __________________ *CHEVY ONLY*

01-31-2010, 08:06 PM	#86
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* pm sent Joe

01-31-2010, 08:23 PM	#87
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 1984 C10 parting out* I think it may be the lines at the bottom of this pic, under the switching valve. __________________ *CHEVY ONLY*

01-31-2010, 08:31 PM	#88
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* I went out and got the lines and took a pic...have it up in a second Last edited by Stitch; 01-31-2010 at 08:35 PM.

01-31-2010, 08:37 PM	#89
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* ok here's the pic...is it the small lines or the long lines...like I said in the pm, 87bob has first dibs on any of this, but if he passes then you'll be next in line...thanks Joe Attached Images

01-31-2010, 08:45 PM	#90
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 1984 C10 parting out* It is the short ones..... I'm not 100% sure those are like mine though, I'll have to look thanks! __________________ *CHEVY ONLY*

01-31-2010, 11:59 PM	#92
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: 1984 C10 parting out* Hi Chuck, Wondering if you'll part with just the front steering linkage....basically I need the center link, but if it'll be easier to pull the outer/ inner tie rods, pitman arm, I'll do that.....shipping to 28031 or if you're headed to the Charlotte area or Myrtle Beach I could meet a somewhere??...Thanks Geoff __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present



Register or Log In To remove these advertisements.

02-01-2010, 12:09 AM	#93
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* let me see what I can do with getting it out alone...on May 8th, I'm going to Salisbury, NC for the Gathering of the Goofs for this site...I could bring it with me to that if that's not too far in the future for you... I just checked and you should be less than an hour from Salisbury...you come swing by and come to the Gathering of the Goofs and get some grub too... LOL...just checked the RSVP thread and you're on it...so you'll be there...if for some reason you don't make it, me and my family will be at the camp ground some of the day Sunday also before we head back home... Last edited by Stitch; 02-01-2010 at 12:16 AM.

02-01-2010, 12:17 AM	#94
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: 1984 C10 parting out* That would work out great for me....I'm headed there too!!! Let me know how much Chuck....you coming to Charlotte Auto Fair in April 8-11?? __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

02-01-2010, 12:20 AM	#95
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* nope...our little boy is due to be born at the end of March, so I probably won't be leaving town until the GOTG except to goto Charleston to show him off the family...that's great that your going too...I'm excited about it...we're getting there Friday night and going to rent a cabin Friday and Saturday night...

02-02-2010, 08:52 AM	#96
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* Shamil, I sent your shift indicator out yesterday...sorry for the delay...thanks for the purchase Chuck.

02-02-2010, 10:57 AM	#97
Shamil Registered User Join Date: Nov 2006 Location: Amman, Jordan Posts: 121	Re: 1984 C10 parting out* is the switch valve in good shape? how much do you need for it?

02-02-2010, 12:36 PM	#98
softballnrd27 Always a work in progress Join Date: Jun 2007 Location: Harker Heights, TX Posts: 1,599	Re: 1984 C10 parting out* Ok here is what I need, can you give me a package and individual total and what is available: Driveshaft All the harware to mount the lights to the core support Engine compartment wiring harness Gauge bezel Outside door locks I am in Augusta, GA so I won't need shipping __________________ USMC Retired Never trust a man who can't laugh at his own fart! 2010 Silverado Crew Cab 73 SWB 5.3/4l80e Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=695168 Last edited by softballnrd27; 02-02-2010 at 12:39 PM.

Register or Log In To remove these advertisements.