KS 72 cheyenne getting parted now - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

junkcarguy · 09-25-2011, 08:50 AM

Ok let me know how you want paid
Posted via Mobile Device

junkcarguy · 09-25-2011, 08:52 AM

Also looking for the plug that fills in the clutch rod hole on the firewall for an automatic
Posted via Mobile Device

teeitup · 09-25-2011, 09:21 AM

Hubscrub, I'm headed out there in a bit to try to get it all off

Junkcarguy, I have a original metal clutch hole cover for $10, so $39 shipped total it and towers

Thanks Randy

**WIDESIDE72** · 09-25-2011, 11:19 AM

timing pointer?

teeitup · 09-25-2011, 12:25 PM

Steve, this one here is welded to the timing cover

teeitup · 09-25-2011, 03:38 PM

Steve, I was mistaken, here it is

teeitup · 09-25-2011, 03:41 PM

OK, its completely parted and headed to scrap this week, here are more parts off and some parts you guys asked about, I will post pics then go back and edit telling you about them. Thanks Randy

teeitup · 09-25-2011, 03:42 PM

chevybuldr, the 2 on this truck were cracked but I have these 2, one has some pitting on one end

teeitup · 09-26-2011, 05:59 PM

69rut, sorry it was hauled to scrap this morning

Jud, I don't see anything where it says 500 on it

David, I will look, I think I only have one lower one out there

Thanks Randy

niterider65 · 09-26-2011, 10:10 PM

Hi whats the gear and pinion ratio ?? on the posi unit

teeitup · 09-26-2011, 10:12 PM

niterider65, Bill, PS pump and brackets with ps box $65 plus shipping. Sorry posi is sold. Thanks Randy

junkcarguy · 09-25-2011, 07:06 PM

Please send pm with how you want paid
Posted via Mobile Device

teeitup · 09-25-2011, 07:11 PM

Hubscrrub, I'll get total for you

junkcarguy, I've sent you 2 pm's with pay pal addy for payment

Thanks Randy

chevybuldr · 09-25-2011, 07:13 PM

I think I am going to pass on the manifolds. Little rougher then I wanted. Thank you though.
What about the front bumper brackets? Need all 4.

HeavyMetalChevy · 09-25-2011, 07:36 PM

how much for headliner and cluster? cluster???

teeitup · 09-25-2011, 07:50 PM

chevybuldr, no problem on manifolds. I have a set of outer 71-72 for $15 plus shipping. I'll have to check and see if I have any inner "L" brackets

HeavymetalChevy, black headliner $75 shipped, I put a piece of plywood in with it to try to keep it from being damaged, no trim for it. Gauge setup $35 shipped

Thanks Randy

HeavyMetalChevy · 09-30-2011, 08:23 PM

Quote:

Originally Posted by teeitup

chevybuldr, no problem on manifolds. I have a set of outer 71-72 for $15 plus shipping. I'll have to check and see if I have any inner "L" brackets

HeavymetalChevy, black headliner $75 shipped, I put a piece of plywood in with it to try to keep it from being damaged, no trim for it. Gauge setup $35 shipped

Thanks Randy

Hey randy... I will take the shroud and fan...send me a paypal payment request to remimartin257@aol.com... Also see shipping cost on hedliner if you still have...

Thanks,
Duane

HeavyMetalChevy · 10-01-2011, 08:30 AM

Payment sent randy... Thanks again!!! I will get back to you on the headliner and look forward to doing more business in the future

chevybuldr · 09-25-2011, 08:05 PM

Actually I need the bumper brackets for a '70. Whats the difference?

Hubscrub · 09-25-2011, 10:10 PM

Payment Sent for column and sway bar thanks.

junkcarguy · 09-25-2011, 10:43 PM

I hate paypall I'll send money tomorrow
Posted via Mobile Device

teeitup · 09-25-2011, 10:47 PM

chevybuldr, 71-72 are longer, here is what I have $25 plus shipping for the 4. These are off a 69 chevy

teeitup · 09-25-2011, 10:48 PM

Hubscrub, I'll get them shipped out either tues or Wed for sure, THANKS

junkcarguy, no problem, Thanks

teeitup · 09-25-2011, 10:49 PM

pics for Coop

69rut · 09-26-2011, 06:42 AM

PM sent with photos of what I need. Thanks.

09-25-2011, 08:50 AM	#1
junkcarguy Registered User Join Date: Sep 2011 Location: colorado springs colorado Posts: 49	Re: 72 cheyenne getting parted now Ok let me know how you want paid Posted via Mobile Device

09-25-2011, 08:52 AM	#2
junkcarguy Registered User Join Date: Sep 2011 Location: colorado springs colorado Posts: 49	Re: 72 cheyenne getting parted now Also looking for the plug that fills in the clutch rod hole on the firewall for an automatic Posted via Mobile Device

09-25-2011, 09:21 AM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 cheyenne getting parted now Hubscrub, I'm headed out there in a bit to try to get it all off Junkcarguy, I have a original metal clutch hole cover for $10, so $39 shipped total it and towers Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-25-2011, 11:19 AM	#4
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 72 cheyenne getting parted now timing pointer?

09-25-2011, 12:25 PM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 cheyenne getting parted now Steve, this one here is welded to the timing cover __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-25-2011, 03:38 PM	#6
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 cheyenne getting parted now Steve, I was mistaken, here it is Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-25-2011, 03:41 PM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 cheyenne getting parted now OK, its completely parted and headed to scrap this week, here are more parts off and some parts you guys asked about, I will post pics then go back and edit telling you about them. Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-25-2011, 03:42 PM	#8
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 cheyenne getting parted now chevybuldr, the 2 on this truck were cracked but I have these 2, one has some pitting on one end Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 09-25-2011 at 03:54 PM.

09-26-2011, 05:59 PM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 cheyenne getting parted now 69rut, sorry it was hauled to scrap this morning Jud, I don't see anything where it says 500 on it David, I will look, I think I only have one lower one out there Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-26-2011, 10:10 PM	#10
niterider65 Registered User Join Date: Jun 2011 Location: colleyville tx Posts: 624	Re: 72 cheyenne getting parted now Hi whats the gear and pinion ratio ?? on the posi unit

09-26-2011, 10:12 PM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 cheyenne getting parted now niterider65, Bill, PS pump and brackets with ps box $65 plus shipping. Sorry posi is sold. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-25-2011, 07:06 PM	#12
junkcarguy Registered User Join Date: Sep 2011 Location: colorado springs colorado Posts: 49	Re: 72 cheyenne getting parted now Please send pm with how you want paid Posted via Mobile Device

09-25-2011, 07:11 PM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 cheyenne getting parted now Hubscrrub, I'll get total for you junkcarguy, I've sent you 2 pm's with pay pal addy for payment Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-25-2011, 07:13 PM	#14
chevybuldr Registered User Join Date: Oct 2008 Location: Livermore ca Posts: 699	Re: 72 cheyenne getting parted now I think I am going to pass on the manifolds. Little rougher then I wanted. Thank you though. What about the front bumper brackets? Need all 4.

09-25-2011, 07:36 PM	#15
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: 72 cheyenne getting parted now how much for headliner and cluster? cluster??? __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog



Register or Log In To remove these advertisements.

09-25-2011, 07:50 PM	#16
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 cheyenne getting parted now chevybuldr, no problem on manifolds. I have a set of outer 71-72 for $15 plus shipping. I'll have to check and see if I have any inner "L" brackets HeavymetalChevy, black headliner $75 shipped, I put a piece of plywood in with it to try to keep it from being damaged, no trim for it. Gauge setup $35 shipped Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-01-2011, 08:30 AM	#18
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: 72 cheyenne getting parted now Payment sent randy... Thanks again!!! I will get back to you on the headliner and look forward to doing more business in the future __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

09-25-2011, 08:05 PM	#19
chevybuldr Registered User Join Date: Oct 2008 Location: Livermore ca Posts: 699	Re: 72 cheyenne getting parted now Actually I need the bumper brackets for a '70. Whats the difference?

09-25-2011, 10:10 PM	#20
Hubscrub Cruzin Join Date: Dec 2009 Location: on the road Posts: 2,835	Re: 72 cheyenne getting parted now Payment Sent for column and sway bar thanks. __________________ Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14

09-25-2011, 10:43 PM	#21
junkcarguy Registered User Join Date: Sep 2011 Location: colorado springs colorado Posts: 49	Re: 72 cheyenne getting parted now I hate paypall I'll send money tomorrow Posted via Mobile Device

09-25-2011, 10:47 PM	#22
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 cheyenne getting parted now chevybuldr, 71-72 are longer, here is what I have $25 plus shipping for the 4. These are off a 69 chevy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-25-2011, 10:48 PM	#23
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 cheyenne getting parted now Hubscrub, I'll get them shipped out either tues or Wed for sure, THANKS junkcarguy, no problem, Thanks __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-25-2011, 10:49 PM	#24
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 cheyenne getting parted now pics for Coop Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-26-2011, 06:42 AM	#25
69rut Registered User Join Date: Sep 2006 Location: SE Virginia Posts: 158	Re: 72 cheyenne getting parted now PM sent with photos of what I need. Thanks. __________________ trailers are for boats

Register or Log In To remove these advertisements.