GMC cab/clip - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jb4short · 08-14-2007, 10:33 AM

Rob- that looks as good as the one we're trying to build

bigblockorange · 08-27-2007, 03:48 PM

Thanks Jim for stopping to buy the other cab! I still have a lot of extra parts plus the cab/clip to sell! Rob

bigblockorange · 08-14-2007, 10:32 AM

lowered price!!!

bigblockorange · 08-30-2007, 08:12 AM

I just added parts to the deal I will part the truck out!

msgross · 08-30-2007, 10:45 AM

Rob, I still need a nice pass door and tailgate....

short step · 08-30-2007, 03:04 PM

are the cab & doors in decent shape and how much for them? i dont need the frame or bed
bob

bigblockorange · 08-30-2007, 03:56 PM

Short step I'll let you know a price in a few days I've lined up sales for a lot of what I have, not sure how bad the rust is up your way for around here it is a nice project to me. I've redone worse!!!!!!!!! BBO

bigblockorange · 09-06-2007, 03:35 PM

Ttt

bigblockorange · 09-18-2007, 08:05 AM

I'm going to strip the cab for parts to take to Fall Carlisle anyone need anythig let me know. Rob

67-72williso · 09-18-2007, 09:45 PM

I think I saw that blue GMC in Enola. I hauled some dirt in for the guy right below you to fill in his bank.
Later, Willis

bigblockorange · 10-02-2007, 03:19 PM

I will be on the turnpike field this weekend at fall Carlisle!!!!!!!

bigblockorange · 10-08-2007, 08:18 AM

Last chance if you need anything off these cabs!

msgross · 10-08-2007, 10:32 AM

any luck at Carlisle?

I still need a driver side front fender and two good inner fenders... GMC fender should work if you have one...

bigblockorange · 10-08-2007, 01:42 PM

Hey Mike get a hold of me this week leave a message I'll be around Sat/Sun. Rob

70' GMC · 10-28-2007, 04:42 PM

do you still have the parts?

bigblockorange · 10-30-2007, 01:34 PM

Sorry guys I had to step out of town for a bit and just got to my emails I sent 2 trucks to the scrap yard last month I only have the GMC left to sell let me know if anyone needs anything off of it I will crush it soon. Rob

bigblockorange · 03-22-2008, 09:45 PM

Anyone need this stuff? Make offer.

***Josh*** · 03-24-2008, 12:38 AM

Quote:

Originally Posted by bigblockorange

Anyone need this stuff? Make offer.

Please Resubscribe in order to continue selling. This post is closed until you PM that you have resubscribed.

Josh

msgross · 03-23-2008, 01:23 AM

what's left on it? I still need a driver fender, pass door, tailgate, front wood floor panel, better cab would be nice but I want to keep my VIN...

Im still in Alabama for another 3 weeks...

dknoth05 · 03-23-2008, 06:43 AM

I could use a good driver door, and driver bedside, and possibly a front bed panel for wood floor, if you have anything let me know. Thanks, Dan

08-14-2007, 10:33 AM	#1
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: GMC cab/clip Rob- that looks as good as the one we're trying to build

08-27-2007, 03:48 PM	#2
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip Thanks Jim for stopping to buy the other cab! I still have a lot of extra parts plus the cab/clip to sell! Rob __________________ I guess you could say I’m not really lazy I’m just real good at doing nothing!!!!

08-14-2007, 10:32 AM	#3
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip lowered price!!! __________________ I guess you could say I’m not really lazy I’m just real good at doing nothing!!!!

08-30-2007, 08:12 AM	#4
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip I just added parts to the deal I will part the truck out! __________________ I guess you could say I’m not really lazy I’m just real good at doing nothing!!!!

08-30-2007, 10:45 AM	#5
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: GMC cab/clip Rob, I still need a nice pass door and tailgate.... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

08-30-2007, 03:04 PM	#6
short step Registered User Join Date: Dec 2002 Location: Ludlow,MA Posts: 145	Re: GMC cab/clip are the cab & doors in decent shape and how much for them? i dont need the frame or bed bob

08-30-2007, 03:56 PM	#7
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip Short step I'll let you know a price in a few days I've lined up sales for a lot of what I have, not sure how bad the rust is up your way for around here it is a nice project to me. I've redone worse!!!!!!!!! BBO __________________ I guess you could say I’m not really lazy I’m just real good at doing nothing!!!! Last edited by bigblockorange; 08-30-2007 at 03:58 PM.

09-06-2007, 03:35 PM	#8
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip Ttt __________________ I guess you could say I’m not really lazy I’m just real good at doing nothing!!!!

09-18-2007, 08:05 AM	#9
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip I'm going to strip the cab for parts to take to Fall Carlisle anyone need anythig let me know. Rob __________________ I guess you could say I’m not really lazy I’m just real good at doing nothing!!!!

09-18-2007, 09:45 PM	#10
67-72williso Junk/Daily Driver Club Join Date: Feb 2004 Location: Manheim, PA 17545 Posts: 253	Re: GMC cab/clip I think I saw that blue GMC in Enola. I hauled some dirt in for the guy right below you to fill in his bank. Later, Willis __________________ Daily Driver: 1970 C-20 400 sbc,sm-465,Dana 61 one ton SRW rear, 3.07 gears, locker. There are three kinds of people: those who make things happen, those who watch things happen, and those who have no idea what happened!

10-02-2007, 03:19 PM	#11
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip I will be on the turnpike field this weekend at fall Carlisle!!!!!!! __________________ I guess you could say I’m not really lazy I’m just real good at doing nothing!!!!

10-08-2007, 08:18 AM	#12
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip Last chance if you need anything off these cabs! __________________ I guess you could say I’m not really lazy I’m just real good at doing nothing!!!!

10-08-2007, 10:32 AM	#13
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: GMC cab/clip any luck at Carlisle? I still need a driver side front fender and two good inner fenders... GMC fender should work if you have one... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 10-08-2007 at 10:33 AM.

10-08-2007, 01:42 PM	#14
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip Hey Mike get a hold of me this week leave a message I'll be around Sat/Sun. Rob __________________ I guess you could say I’m not really lazy I’m just real good at doing nothing!!!!

10-28-2007, 04:42 PM	#15
70' GMC HERE.......Somewhere Join Date: Oct 2006 Location: Birmingham AL Posts: 2,488	Re: GMC cab/clip do you still have the parts? __________________ Current rides: 2013 Hyundai elantra gt DD 1995 camaro my first crush lmao Was: 1970 with a 350 4barrel and 288 horses Classics make it possible!



Register or Log In To remove these advertisements.

10-30-2007, 01:34 PM	#16
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip Sorry guys I had to step out of town for a bit and just got to my emails I sent 2 trucks to the scrap yard last month I only have the GMC left to sell let me know if anyone needs anything off of it I will crush it soon. Rob __________________ I guess you could say I’m not really lazy I’m just real good at doing nothing!!!!

03-22-2008, 09:45 PM	#17
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip Anyone need this stuff? Make offer. __________________ I guess you could say I’m not really lazy I’m just real good at doing nothing!!!!

03-23-2008, 01:23 AM	#19
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: GMC cab/clip what's left on it? I still need a driver fender, pass door, tailgate, front wood floor panel, better cab would be nice but I want to keep my VIN... Im still in Alabama for another 3 weeks... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

03-23-2008, 06:43 AM	#20
dknoth05 Registered User Join Date: Dec 2007 Location: Vandalia, Ohio Posts: 13	Re: GMC cab/clip I could use a good driver door, and driver bedside, and possibly a front bed panel for wood floor, if you have anything let me know. Thanks, Dan

Register or Log In To remove these advertisements.