OR parting out 1970 C10 CST

[tll74]

Originally Posted by TripleNickel

If Burb71 doesn't take the radiator, I'd like that item along with the the 4 row upper and lower mount set and the shroud (with clips?)

I'm posting pics of the rad now. We'll see what Burb71 decides.

Originally Posted by TripleNickel

If things work out on the cooling system setup, that would have to go in another box anyway, so no need for us to wait on this first grouping .

I am going to pass on the e-Brake. Otherwise...

Time for a grand total Mr. Cashier!

Column, complete (Drum/Drum) P/B setup including pedal, and under-dash wiring harness with shipping to 44305.

OK...steering column 50.00, P/B set up with pedal 75.00, under dash wiring 65.00 and shipping with two packages @ 26.00 each. Total is 242.00. Did I miss anything?

Originally Posted by zicc1835

thanks Tom,
i been trying to finish up my 72 still collecting parts for my SS i will be traveling to Seatac next 4 -6 weeks and have a friend/co worker from Portland meeting me in Kennewick WA. each week lucky me. i will send you a USPOMO for the locks and keys and see what we can do on the wheel in the other thread meanwhile im gonna keep looking at your posts to see what else i can use maybe i can hook my friend to meet with you or i may be able to drive to you if it works for us both one of the 4-6 weeks i will be there... pics of last haul back on the airplane dash pad in the tube& rear sway bar duct tapped to it LOL seat belts arm rests and Saddle GBD & cluster all made it back safe with AT cross member i picked up from LIVRAT ( Mark) by SeaTac all in a golf bag thanks to United i got some looks from the TSAPM me the address to send the MO ill get it out tomorrow
Jess

Jess, Thats a cool pic! PM sent

Originally Posted by mahanian

The black visors are the ones I'm interested in, sounds like Randy passed so could you give me a price shipped to 85224?

Yes, Randy passed and your up. Do want the the cheaper one or another nice one at 25.00? I bought a truck today that has a couple more nice ones. Shipping on a pair is 14.00

Originally Posted by 69sinker

Payment sent for pass def vent, PB conversion , window shades and kick panel vents. Thanks
Posted via Mobile Device

Thanks!!

Originally Posted by DeadheadNM

I'll take the lower wood grain door panels: pass on the spotlight. PM payment details when poss - no rush. Thanks Tom

Pete, I'll get a shipping cost and get back to you.

Originally Posted by grwnded71

passing on the wing windows, thanks!

Ok, Thanks

Originally Posted by bronze 72 super

Hey any chance of bringing any sheet metal to the Portland Swap Meet? Looking for a good rad. support, left front fender and both inner fenders. A answer back would be appreciated. Thanks Mike.

Hey Mike...Yes I can. I have a couple very nice core supports (69-72 chevy) that have been acid dipped (they will be bare metal), I should have the fender. Probably not on the inners..I'll check

Originally Posted by Soyalent Green

Black auto column still for sale?

This one is spokeen for. PM sent

Originally Posted by Moline_Puller

I'll get in line for the mirrors and the roof visor...let me know if they become available, and the price, shipped to 07461.


Thanks!
Chris

The mirrors are available. The visor is pending. shipping on the mirrors is 22.00

Originally Posted by dbaer

can i get pics of the heater housing and core and an address to send a MO to? appreciate it!!

Do want more pics of the housing other than the ones I posted? I'll get pics of the core.

Originally Posted by scud44

Hi tom, by any chance do you have a center link for sale?
Posted via Mobile Device

Yes, 67-70 or 71-72? 30.00 and 40.00 Plus shipping.

Thanks guys, Tom

[tll74]

Originally Posted by BigRed76

I'll take the steering wheel, shipping is to 80537. I'll take the black armrests too if you can combine shipping on those. I saw LSUMurse passed.

No word from plumber36757 so if you want the arm rest there yours.

[tll74]

[QUOTE=burb71;5966779][B]Is the radiator a 4 row with ports for tranny oil cooler, if so is it a original GM Harrison?

pics of the radiator. I pressure tested it today and its fine. It's also very clean inside. There are a some fins that need straightening and has a ding as the pic shows. Over all with a paint job it should be just fine.

[Moline_Puller]

Hey,

I think I'll pass on the mirrors this time...thanks for the quote. I've spent too much on the truck this month already!

But, if the visor sale doesn't happen, let me know. Or, if still have the mirrors after a while, get back to me.

Thanks again!


Chris

[burb71]

Can you please pack the radiator for safe shipping so that no damage comes to it, but for the lowest shipping cost

[BigRed76]

I think I'm going to pass on the armrests, they are nice but I don't absolutely need them right now. So I'll take the steering wheel. PM me with your Paypal info & I'll get you the payment.
Posted via Mobile Device

[scud44]

Ill take 67-70 center link. Shipped to 93306 cali. pm me with paypal info. Thanks
Posted via Mobile Device

[dbaer]

i just want too make sure the heater core has the smaller pans. i just got an aftermarket core from LMC and the pans are too large, clips don't fit etc. also the housing looked like the lower port was chipped? other than that i am ready!

[tll74]

Originally Posted by burb71

Can you please pack the radiator for safe shipping so that no damage comes to it, but for the lowest shipping cost

The shipping cost is 43.00, thats exact cost thru UPS. Yes I would package it well.

Originally Posted by Moline_Puller

Hey,

I think I'll pass on the mirrors this time...thanks for the quote. I've spent too much on the truck this month already!

But, if the visor sale doesn't happen, let me know. Or, if still have the mirrors after a while, get back to me.

Thanks again!


Chris

No problem

Originally Posted by BigRed76

I think I'm going to pass on the armrests, they are nice but I don't absolutely need them right now. So I'll take the steering wheel. PM me with your Paypal info & I'll get you the payment.
Posted via Mobile Device

PM sent

Originally Posted by scud44

Ill take 67-70 center link. Shipped to 93306 cali. pm me with paypal info. Thanks
Posted via Mobile Device

Pm sent

Originally Posted by dbaer

i just want too make sure the heater core has the smaller pans. i just got an aftermarket core from LMC and the pans are too large, clips don't fit etc. also the housing looked like the lower port was chipped? other than that i am ready!

Pics below. I just took this out of a truck a week ago. The mounts fit the tanks just fine. It is a replacement core.

Thanks Guys, Tom

[TripleNickel]

Originally Posted by tll74

OK...steering column 50.00, P/B set up with pedal 75.00, under dash wiring 65.00 and shipping with two packages @ 26.00 each. Total is 242.00. Did I miss anything?

You didn't miss anything, but are the

"67-70 gas pedal one w/deluxe trim 8.00"
(the P/B setup's brake pedal was picture with deluxe trim, so I'm trying to match)

and the

"3/8 fuel line at tank 8.00"

from Pic 2 of "Misc parts from a few trucks" still available?

If so, add them to the list and let me know if that adds to the shipping.

Thanks,

Wayne

[TripleNickel]

And if Burb71 passes on the radiator, I am interested in that item along with the hold-downs and the listed or another good small block shroud.

Thanks,

Wayne

[tll74]

Originally Posted by TripleNickel

You didn't miss anything, but are the

"67-70 gas pedal one w/deluxe trim 8.00"
(the P/B setup's brake pedal was picture with deluxe trim, so I'm trying to match)

and the

"3/8 fuel line at tank 8.00"

from Pic 2 of "Misc parts from a few trucks" still available?

If so, add them to the list and let me know if that adds to the shipping.

Thanks,

Wayne

Wayne, I thought I sold that one. It was 8.00 and the one in this thread is 15.00. Where was my mind when I did that? 8.00 is fine and 8.00 on the fuel line. Shipping won't change. We'll see what Burb71 decides on the rad. The listed shroud is still available and the 4 core mounts as well. I have many shrouds and 4 core mount set ups. Thanks, Tom

[shadow205855]

Does the instrument cluster have guages? If so, Im looking for the plastic connector that plugs into the instrument cluster. Thanks.

[TripleNickel]

Originally Posted by tll74

Wayne, I thought I sold that one. It was 8.00 and the one in this thread is 15.00. Where was my mind when I did that? 8.00 is fine and 8.00 on the fuel line. Shipping won't change. We'll see what Burb71 decides on the rad. The listed shroud is still available and the 4 core mounts as well. I have many shrouds and 4 core mount set ups. Thanks, Tom

Very good.

Would you have 2 black visor clips and/or a deluxe clutch pedal available? I feel like I'm at Wal-Mart, remembering last minute items once I get to the checkout.

Also, I need your email address for the PayPal payment. When you mention sending as "personal", is that choosing "I'm sending money to family or friends" rather than "'I'm paying for goods or services" when processing the payment?

Thanks,

Wayne

[dbaer]

Excellent, I will take the housing and core. Can you give me an address to send a MO to?

[burb71]

Please PM me your paypal address and I can send payment.

[tll74]

Originally Posted by shadow205855

Does the instrument cluster have guages? If so, Im looking for the plastic connector that plugs into the instrument cluster. Thanks.

Sorry, No cluster plugs at this time.

Originally Posted by TripleNickel

Very good.

Would you have 2 black visor clips and/or a deluxe clutch pedal available? I feel like I'm at Wal-Mart, remembering last minute items once I get to the checkout.

Also, I need your email address for the PayPal payment. When you mention sending as "personal", is that choosing "I'm sending money to family or friends" rather than "'I'm paying for goods or services" when processing the payment?

Thanks,

Wayne

Wayne, LOL..I can relate on the last minute thing. Yes, I have the visor clips. I should have the pedal just not sure exactly how good it is. PM sent

Originally Posted by dbaer

Excellent, I will take the housing and core. Can you give me an address to send a MO to?

PM sent

Originally Posted by burb71

Please PM me your paypal address and I can send payment.

PM sent

[rusty knuckles 5]

Hi! I am looking for a proportioning valve mounting bracket thanks

[tll74]

[QUOTE=rusty knuckles 5;5979843]Hi! I am looking for a proportioning valve mounting bracket thanks[/QUOTE
What year is your truck? I might.

[TripleNickel]

PM and PayPal both sent.

[rusty knuckles 5]

Hi! its a 1972 chevy k/20 thanks

[DeadheadNM]

Tom in addn to the woodgrain door moldings from this truck any chance you have:

1) a metal gas pump to carb line
2) a good OEM 2wd fan shroud
3) and/or a rusty metal 4wd upper rad hose that I can chop the ends off of?

Thanks - Pete

[tll74]

Originally Posted by rusty knuckles 5

Hi! its a 1972 chevy k/20 thanks

I just bought a 72 with a bad booster. I'll do the bracket for 12.50 shipped.

Originally Posted by TripleNickel

PM and PayPal both sent.

Thanks Wayne, I'll let you know on the brake lines.

Originally Posted by DeadheadNM

Tom in addn to the woodgrain door moldings from this truck any chance you have:

1) a metal gas pump to carb line
2) a good OEM 2wd fan shroud
3) and/or a rusty metal 4wd upper rad hose that I can chop the ends off of?

Thanks - Pete

Pete, Just sent you PM on the trim.
What year on the line? Or just one that would fit a Q-jet?
Yes on the shroud for a 2wd. 40.00 for a nice one. Plus shipping. I shipped one out the other day and it was about 16.00.
No upper at this time. I think you got the last one I had.d


Thanks, Tom

[DeadheadNM]

Tom: Q-jet line for a 72 and I'll take the shroud if OEM and nice (shipping to 87110). LMK if you have the Q-jet line when you can. Will use the shroud in my K20 - think I'll need the shorter 2wd version as I moved the motor forward for the 700R4 install. Pete

[henson546]

Hello I am looking for the interior heater box part shown in my attachment.
Thanks