![]() |
|
![]() |
#1 |
Registered User
Join Date: Feb 2016
Location: Othello washington
Posts: 400
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
When I did my Hydroboost i got fittings i thought i wanted along with hose that goes with the fittings cut a little long. took it all home and routed the hose to the fittings and cut it to length and slide it onto the fittings and marked the clock position i wanted fittings to end up. Then i took it back to the hose place and had them crimp the ends. If one end is straight and the other is a 90 its no big deal but if you have 2 90's they need to be clocked right.
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jun 2005
Location: California
Posts: 521
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
My local Napa is no good their. I had the local hose place make the hoses at $70 a pop
![]() If I were to do it again, id make some AN line.
__________________
‘53 GMC COE stock ‘53 Chevy 3100 LSA/TR6060 http://67-72chevytrucks.com/vboard/s....php?t=805949‘ '70 Chevy C10 LWB 350/sm465 ‘74 Chevy C10 SWB 5.3/4L80e, Vintage Air, Dakota Digital, US Mags |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jan 2013
Location: roseville
Posts: 823
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
I've looked at this option as well, but it appears that it costs about the same. I guess that will at least give me the opportunity to build them at home in my flip flops and just get it done and over with!
__________________
My Current Trucks: 1958 Apache BBW 4.8LS/4l60 "Lucky" Built By Me 1958 GMC BBW LS1/4l60 "The Kraken" Built By Delmo |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jan 2013
Location: roseville
Posts: 823
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
Okay, I'm posting up another mini Tech Tip:
How to get cheap and attractive Aluminum 6AN hose frame clamps They sell these aluminum hose clamps on eBay, Amazon, etc made for braided lines, but they also work well for rubber fuel line if you order one size up (Order 8AN for a 6AN rubber hose) They're about $10 for a set of 4: ![]() Well I ordered a pack of these and decided to modify one to use as a frame clamp. It worked very well. Step 1. Replace the screw that comes with it with a longer one. I had to sand down an m6 socket head cap screw a bit for it to squeeze into the hole made for the original, but not by much. Use a longer screw that protrudes past the clamp. ![]() Step 2. Drill out the bottom threaded piece of the clamp to remove the threads, allowing the longer bolt to pass through freely ![]() Step 3. Drill and tap your frame in the desired location of the clamp I used an m6 tap since I had a metric socket head cap screw. You could use a 1/4" tap instead. Step 4. Screw in the clamp and marvel at your ingenuity! If you use the right length screw or trim your down, it can sit flush with the frame. an M6x1.25 was a perfect fit for me. ![]() ![]() ![]()
__________________
My Current Trucks: 1958 Apache BBW 4.8LS/4l60 "Lucky" Built By Me 1958 GMC BBW LS1/4l60 "The Kraken" Built By Delmo |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jan 2013
Location: roseville
Posts: 823
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
I also got my homemade frame bracket installed. I like this one because it was completely free, and I can customize the design to include a longer mounting post.
![]() ![]() ![]() In addition, I whipped up a little bracket for the breather coming from the fuel pump, and used an existing hole in the rear crossmember to mount it. ![]() Not big jobs, but things that need to get done. An hour here and an hour there and one day I will wake up to a finished project! **Plus these are good for when you only have a couple hours and you cant get covered in grease because you have things to do later. Let me know what yall think!
__________________
My Current Trucks: 1958 Apache BBW 4.8LS/4l60 "Lucky" Built By Me 1958 GMC BBW LS1/4l60 "The Kraken" Built By Delmo |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jan 2013
Location: roseville
Posts: 823
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
I've been humming and hawing on what to work on next... I'm a weird spot in the build where everything seems like it depends on something else to be done first in a strange chicken-or-the-egg circle!
I decided to make a home for my LS PCM in the Glove Box area for now. I don't if / how long it will stay here, but it will be easy to access while the build is fresh, and once the truck is running, driving, and shaken down, I can perhaps find a more elegant solution. That being said, the tray is very sturdy for being a single piece of sheet metal, owing to the curved sides giving it strength as well as matching the curves of the opening. I cut out a section of the rear to make room for wiring to easily reach the PCM. I welded some nuts to the bottom since you really cant reach in there to hold one. This makes it much easier to install. Lately I've been doing this to many custom fabbed items. ![]() ![]() I can grab ahold of the PCM and shake the entire truck, its that solid in there. ![]()
__________________
My Current Trucks: 1958 Apache BBW 4.8LS/4l60 "Lucky" Built By Me 1958 GMC BBW LS1/4l60 "The Kraken" Built By Delmo |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Nov 2010
Location: calgary alberta
Posts: 8,039
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
Looks solid.
If its fabled up, mounted and done why change it? When I get to a place in a build like you have I just make a list of things to do. Pick something and work on that to finish. I try not to do something that I will need to come back to at some point to rehab, change or finesse. Lately I have decided to start at the rear bumper and work forward, finishing everything as I go, like ready for paint kinda finishing. I will leave it in epoxy primer when done and drive it that way to make sure all the bugs are ironed out before a final paint job.all bodywork will be done so when paint time comes it will be less of an ordeal. I find lately that's what works for me to keep a forward motion going. There is too much going on these days to say I will do an hour a day so I try to keep the jobs manageable and not have a huge array of parts laying around disassembled. I pick a job and follow through till finished then start another job and do the same. |
![]() |
![]() |
![]() |
#8 | |
Registered User
Join Date: Jan 2013
Location: roseville
Posts: 823
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
Quote:
I like that approach, just start at one end and keep working towards the other! I do sometimes end up with multiple half-finished jobs just due to inexperience.. halfway through I didn't realize that I needed to order new bushings/bits/seals/etc and then I'm waiting for parts, so I start something else while I'm waiting...and that has its own considerations, so then I need parts, or I realize I cant finish that until I do something else too...I'm trying to break out of that, do my research, order parts, and don't start until I can finish.
__________________
My Current Trucks: 1958 Apache BBW 4.8LS/4l60 "Lucky" Built By Me 1958 GMC BBW LS1/4l60 "The Kraken" Built By Delmo |
|
![]() |
![]() |
![]() |
#9 | |
Senior Member
![]() Join Date: Sep 2016
Location: Hershey, PA
Posts: 1,004
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
Quote:
Knocked most of it out over two nights by just getting out there and cutting bits of metal. Oh, I also fabbed up a radiator mount that I thought I'd save till later.
__________________
Current Build Thread 1930 Ford Model A Modern Twist: Ford Model A Rat Rod With a Modern Twist Build Thread Phase 1 "The Swap": 1949 3100 with S10 swap. Beginner build with ambition! Build Thread Phase 2 "The Drop": Beginner Build with Ambition gets Air Ride |
|
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Nov 2010
Location: SoCal
Posts: 914
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
![]()
__________________
I'm not tail-gating, I'm drafting. ![]() http://67-72chevytrucks.com/vboard/s...d.php?t=432758 |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Oct 2009
Location: Broken Arrow, OK
Posts: 1,226
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
Like the truck so far. Any progress lately?
Posted via Mobile Device |
![]() |
![]() |
![]() |
#12 | |
Registered User
Join Date: Jan 2013
Location: roseville
Posts: 823
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
Quote:
In the meantime, I have a 56 GMC Suburban next to it that I was working on, just maintenance after it sat for 15 years, and then I bought a 59 because I couldn't help myself. The GMC is mostly done for now, its running and driving again but it needs a new power steering box, so we'll see. I do need to get back to this truck though, I have so many hours in it already and I refuse to sell a project. In theory, since I have the ecu mounted and harness redone, fuel tank installed and fuel line mostly done... Once I mount this engine I can do some wiring and see if this thing is any good. It's a completely untested engine/trans, so should be interesting! Thanks for reminding me that I need to git er done!
__________________
My Current Trucks: 1958 Apache BBW 4.8LS/4l60 "Lucky" Built By Me 1958 GMC BBW LS1/4l60 "The Kraken" Built By Delmo |
|
![]() |
![]() |
![]() |
#13 |
Senior Member
![]() Join Date: Aug 2010
Location: Shasta Lake, CA.
Posts: 1,619
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
The Sub looks like you did some rubbing on the paint before you installed the trim .
Looking good . I see you left off the rubber tips . What are you going to do about the holes ? The reason I put them on is to protect the delicate edges of the bumper ( Dagmars ). It took a lot of work to get the edges ready for chrome .
__________________
Glen & Jane's Rides ‘57 GMC NAPCO Long Bed V8 4 speed Bought 2008 7 other cars & trucks , 5 trailers '56 Chevy Long Bed I6, 4 speed Bought 1990 Sold 8.22.2020 ’56 GMC Suburban Pickup V8, 4 speed Hydramatic Bought 1996 Sold 10.11.2020 My Other Tinkerings http://67-72chevytrucks.com/vboard/s...75#post8967275 Last edited by G&R's57GMC; 08-26-2021 at 06:54 PM. |
![]() |
![]() |
![]() |
#14 | |
Registered User
Join Date: Jan 2013
Location: roseville
Posts: 823
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
Quote:
Leaving the holes for now, I have more drivability-related tasks to accomplish with this truck. I'm sure I'll find a solution I like if I'm patient about it. Now get out in that garage and work on your project!! Start a build thread in the off-topic section.
__________________
My Current Trucks: 1958 Apache BBW 4.8LS/4l60 "Lucky" Built By Me 1958 GMC BBW LS1/4l60 "The Kraken" Built By Delmo |
|
![]() |
![]() |
![]() |
#15 |
Registered User
Join Date: Jan 2013
Location: roseville
Posts: 823
|
Remounting the LS
By coincidence, ended up tagging along with a buddy to the metal store, grabbed some thick sheet, and knew I needed to tackle this engine mount situation.
I originally went with a straight tubing mount, but I ended up not liking those, as well as hacking them up because I moved the engine and needed to redo the mounts. I went back to my LS Flatout mount thread where I asked for help the first time. Almost 3 years later, I took another look at Dans mounts, and decided the 3 wall style, attached to my original tube/bushings at the frame would be my best bet. I liked Dans Ford flathead mounts better, but I already had this so I worked with what I had. I mocked up with cardboard and a wood dowel as a steering rod, then refined the cardboard, then started cutting and welding. My air compressor is on loan so I couldn't use the plasma cutter which made it take awhile. Slapped them together and they're waiting for paint now. This was a huge roadblock...nothing moved forward until I dealt with engine position. Glad to have it behind me!
__________________
My Current Trucks: 1958 Apache BBW 4.8LS/4l60 "Lucky" Built By Me 1958 GMC BBW LS1/4l60 "The Kraken" Built By Delmo |
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Nov 2010
Location: calgary alberta
Posts: 8,039
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
Torch, grinder, file,. Welcome to everybody elses world, plasma boy. Haha
Nice work. |
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Jan 2013
Location: roseville
Posts: 823
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
Ha, well I've been in that world for awhile and I do love my plasma cutter. I don't have an oxy torch, so its cut off wheels for me. Less high speed spinning things= less likely I hurt myself.
__________________
My Current Trucks: 1958 Apache BBW 4.8LS/4l60 "Lucky" Built By Me 1958 GMC BBW LS1/4l60 "The Kraken" Built By Delmo |
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Nov 2010
Location: calgary alberta
Posts: 8,039
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
Yeah, me too. Got the scars and pieces embedded from blown apart zip discs etc. Been thinking of a plasma cutter lately.
When I do cardboard patterns I always try to use poster board or cereal box type cardboard that is single layer because the patterns turn out more precise. Less flex than the thicker box style corrugated cardboard. Especially if there are drill holes to mark. |
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Oct 2009
Location: Broken Arrow, OK
Posts: 1,226
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
Those mounts look great. And…poster board here, too. Anytime I ask my wife to pick some up she’s like “What color?” I just laugh. Won’t matter about 10 minutes after you give it to me. Also…same on cutoff wheels. Sooo many cutoff wheels.
__________________
56 GMC BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=368649 69 long bed Chevy turned 67 gmc jimmy roadster: https://67-72chevytrucks.com/vboard/...d.php?t=851167 |
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Nov 2010
Location: calgary alberta
Posts: 8,039
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
I built a set a lot like but used camaro ls clamshell mounts and made the part on the frameabolt on as well so the whole assembly can be totally removed if needed for spaceto pull engine and trans as an assembly.
|
![]() |
![]() |
![]() |
#21 |
Senior Member
![]() Join Date: Aug 2010
Location: Shasta Lake, CA.
Posts: 1,619
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
dsraven :
Do you have pictures of that ?
__________________
Glen & Jane's Rides ‘57 GMC NAPCO Long Bed V8 4 speed Bought 2008 7 other cars & trucks , 5 trailers '56 Chevy Long Bed I6, 4 speed Bought 1990 Sold 8.22.2020 ’56 GMC Suburban Pickup V8, 4 speed Hydramatic Bought 1996 Sold 10.11.2020 My Other Tinkerings http://67-72chevytrucks.com/vboard/s...75#post8967275 |
![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: Jan 2013
Location: roseville
Posts: 823
|
Mount up!
Got the mounts completed, painted (poorly) and installed. Glad to finally be back to where I was a year go
![]()
__________________
My Current Trucks: 1958 Apache BBW 4.8LS/4l60 "Lucky" Built By Me 1958 GMC BBW LS1/4l60 "The Kraken" Built By Delmo |
![]() |
![]() |
![]() |
#23 |
Registered User
Join Date: Jan 2013
Location: roseville
Posts: 823
|
Back at it!
Bouncing around between trucks, I decided that I need to stop buying trucks and focus on the project I already have, and that I truly want to drive... not easy!!
Easing back into this project, I needed to handle some basics. First up is the battery box and location. I made a drop down battery tray, although I made it for a Group 24 on accident and it should have been a Group 34. I will modify this and shorten the mounts. when the bottom bolt is inserted, it's locked in the accompanying angle iron track on each side. When the bolt is removed, the top bolt can slide all the way down. The bottom bolt is easy to access, and easy to slide in place and rest there when you lift up the battery.
__________________
My Current Trucks: 1958 Apache BBW 4.8LS/4l60 "Lucky" Built By Me 1958 GMC BBW LS1/4l60 "The Kraken" Built By Delmo |
![]() |
![]() |
![]() |
#24 |
Registered User
![]() Join Date: Mar 2007
Location: Scotts, Michigan
Posts: 3,770
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
Very slick and simply solution. Beats shelling out the money for a drop down battery box from a manufacture.
Marc
__________________
…………...........__________ .................. ((__|__||___\____ ..;.;;.:;:;.,;..;((_(O))____ (_(O)) 1948 Chevy Truck - Finished SOLD!! 1953 Chevy Suburban "Family Truckster" Completed: Spring of 2021 http://67-72chevytrucks.com/vboard/s...d.php?t=605484 1994 4x4 Blazer - "Field Find" https://67-72chevytrucks.com/vboard/...ferrerid=30857 |
![]() |
![]() |
![]() |
#25 |
Registered User
Join Date: Jan 2013
Location: roseville
Posts: 823
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
Thanks! I was tempted to just buy the answer and save the time, but I liked that I could build this around a specific battery size from Costco since I know I wont be buying an Optima.
__________________
My Current Trucks: 1958 Apache BBW 4.8LS/4l60 "Lucky" Built By Me 1958 GMC BBW LS1/4l60 "The Kraken" Built By Delmo |
![]() |
![]() |
![]() |
Bookmarks |
|
|