Vintage Air Sale - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Evanz67 · 06-08-2011, 12:08 AM

Thanks just my luck.

paujones · 06-19-2011, 02:36 PM

I'm looking for a sure fit kit for a 1969 CST/10 with factory air cab. My original truck (Custom-10) did not have air, so I need the full kit under the hood (compressor, condensor, etc.) I replaced the original cab with an air cab so I have all the vent holes, but would need new vent hardware.

Would would a complete kit cost shipped to Dublin, Ca. 94568.

Thanks!

Paul

Scottshotrods · 06-21-2011, 02:16 PM

Quote:

Originally Posted by paujones

I'm looking for a sure fit kit for a 1969 CST/10 with factory air cab. My original truck (Custom-10) did not have air, so I need the full kit under the hood (compressor, condensor, etc.) I replaced the original cab with an air cab so I have all the vent holes, but would need new vent hardware.

Would would a complete kit cost shipped to Dublin, Ca. 94568.

Thanks!

Paul

P/m sent
Justin

raic65 · 06-30-2011, 02:07 PM

Hello Justin,

Sent you a PM for quote about some VA components. Forgot to mention I will need a Saden compressor with serpentine belt.

Thanks,
Robert

Scottshotrods · 06-30-2011, 03:33 PM

Quote:

Originally Posted by raic65

Hello Justin,

Sent you a PM for quote about some VA components. Forgot to mention I will need a Saden compressor with serpentine belt.

Thanks,
Robert

call me at the shop (805)485-0382 I can give you your total package deal
justin

SBTork · 07-01-2011, 04:36 PM

can I get a price on a gen 4 kit to fit an 85 Suburban?

It's over 100 degrees here today and with no headliner in my burb it feels like I am cooking

Scottshotrods · 07-02-2011, 03:02 PM

Quote:

Originally Posted by SBTork

can I get a price on a gen 4 kit to fit an 85 Suburban?

It's over 100 degrees here today and with no headliner in my burb it feels like I am cooking

p/m sent
justin

Eighty-6 · 07-02-2011, 05:09 PM

Can I get a quote on a complete gen 4 kit for an 86 Chevy Silverado?

Scottshotrods · 07-05-2011, 10:42 AM

Quote:

Originally Posted by Eighty-6

Can I get a quote on a complete gen 4 kit for an 86 Chevy Silverado?

P/m sent

Justin

raic65 · 07-05-2011, 12:54 PM

Hello Justin,

Wondering if you were able to get prices on the final 3 pieces and a package price for me?

Thanks
Robert

Scottshotrods · 07-05-2011, 01:48 PM

Quote:

Originally Posted by raic65

Hello Justin,

Wondering if you were able to get prices on the final 3 pieces and a package price for me?

Thanks
Robert

Robert,
Can you send me a e-mail with your e-mail and i can send you over your package deal.

Justin

justin@scottshotrods.com

raic65 · 07-05-2011, 01:58 PM

Justin,

Sent the email. Let me know if I'm missing anything from the list.

Thanks,

Robert

Scottshotrods · 07-07-2011, 03:09 PM

Quote:

Originally Posted by raic65

Justin,

Sent the email. Let me know if I'm missing anything from the list.

Thanks,

Robert

Check your e-mail

Justin

raic65 · 07-08-2011, 10:36 AM

Justin,

Could you please resend the email.

Thanks,

Robert

Scottshotrods · 07-08-2011, 10:50 AM

Quote:

Originally Posted by raic65

Justin,

Could you please resend the email.

Thanks,

Robert

Just did and if you did not get send me a e-mail again

Justin

raic65 · 07-08-2011, 12:04 PM

Justin,

Just checked and resent the email. Nothing in the Inbox or Junk mail folder. Hope this works.

Thanks,

RObert

Scottshotrods · 07-08-2011, 12:16 PM

Quote:

Originally Posted by raic65

Justin,

Just checked and resent the email. Nothing in the Inbox or Junk mail folder. Hope this works.

Thanks,

RObert

You should have it this time I had your e-mail wrong the first two times.

Justin

EZ SPEED · 10-09-2011, 01:52 PM

I have PMed nd emailed weeks ago with no response.

Scottshotrods · 10-09-2011, 09:22 PM

Can you resend your mess to my box and you can e-mail at justin@scottshotrods.com

Jon no longer works for Scotts hotrods so to all please p/m or e-mail me at

justin@scottshotrods.com
scotts@scottshotrods.com
sales@scottshotrods.com

I will get back to all of you asap and thankyou for the buss

Justin

IAFF2407 · 10-12-2011, 10:07 PM

1972 Burb with factory air truck with rear air. Is the part number 944170?

I have a cad 500 engine. I do have the Sandeen Comp and mount plate to the Edelbrock manifold. I would need the caddy connections to the compressor plus whatever is needed to hook up the rear air. I believe the part number that VA is for the truck, correct? please let me know asap as I need the firewall blocking plates now.

thx,

Al.

**PGSigns** · 10-13-2011, 07:17 AM

Justin
Any word on the new Gen 4 direct fit kit for the 60 to 66 trucks? I have a 65 and interested in going this route.
Thanks
Jimmy

Scottshotrods · 10-13-2011, 10:46 AM

Quote:

Originally Posted by PGSigns

Justin
Any word on the new Gen 4 direct fit kit for the 60 to 66 trucks? I have a 65 and interested in going this route.
Thanks
Jimmy

The gen 4 kits are done for the 60-66 trucks and they are about two weeks out and will be ready to ship out from vintage air.These are a really great kit
and will keep your truck colder than hell and warmer in the cold winters.As always we will have a great deal on them for all of you truck guys and gals.
Let me know if you want to get your kits on order today!!!!!!

Justin
justin@scottshotrods.com
scotts@scottshotrods.com
sales@scottshotrods.com

Scottshotrods · 10-13-2011, 10:47 AM

Quote:

Originally Posted by IAFF2407

1972 Burb with factory air truck with rear air. Is the part number 944170?

I have a cad 500 engine. I do have the Sandeen Comp and mount plate to the Edelbrock manifold. I would need the caddy connections to the compressor plus whatever is needed to hook up the rear air. I believe the part number that VA is for the truck, correct? please let me know asap as I need the firewall blocking plates now.

thx,

Al.

Al check your e-mail I sent one back to you this morning

Justin

**PGSigns** · 10-13-2011, 01:38 PM

Justin are there any pictures or other information available on how this kit will look and fit up in the new kits? Very interested just need more information before I say yes I want one.
Jimmy

yank · 10-13-2011, 02:59 PM

Justin looking to put A/C in my truck over the winter.Looking for a quote on SureFit kit 941171 with a R4 compressor bracket and a serpintine pulley compressor. Might go with the bulk head fitting since my firewall has been smoothed.
Mike Palmiter

06-08-2011, 12:08 AM	#76
Evanz67 Registered User Join Date: Apr 2010 Location: Livingston, Ca. Posts: 73	Re: Vintage Air Sale Thanks just my luck.

06-19-2011, 02:36 PM	#77
paujones Registered User Join Date: Apr 2011 Location: Dublin, CA Posts: 9	Re: Vintage Air Sale I'm looking for a sure fit kit for a 1969 CST/10 with factory air cab. My original truck (Custom-10) did not have air, so I need the full kit under the hood (compressor, condensor, etc.) I replaced the original cab with an air cab so I have all the vent holes, but would need new vent hardware. Would would a complete kit cost shipped to Dublin, Ca. 94568. Thanks! Paul

06-30-2011, 02:07 PM	#79
raic65 Registered User Join Date: May 2011 Location: Bonita, Ca Posts: 156	Re: Vintage Air Sale Hello Justin, Sent you a PM for quote about some VA components. Forgot to mention I will need a Saden compressor with serpentine belt. Thanks, Robert

07-01-2011, 04:36 PM	#81
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,855	Re: Vintage Air Sale can I get a price on a gen 4 kit to fit an 85 Suburban? It's over 100 degrees here today and with no headliner in my burb it feels like I am cooking __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD.....

07-02-2011, 05:09 PM	#83
Eighty-6 Registered User Join Date: Jul 2008 Location: Round Rock, Tx Posts: 249	Re: Vintage Air Sale Can I get a quote on a complete gen 4 kit for an 86 Chevy Silverado?

07-05-2011, 12:54 PM	#85
raic65 Registered User Join Date: May 2011 Location: Bonita, Ca Posts: 156	Re: Vintage Air Sale Hello Justin, Wondering if you were able to get prices on the final 3 pieces and a package price for me? Thanks Robert

07-05-2011, 01:58 PM	#87
raic65 Registered User Join Date: May 2011 Location: Bonita, Ca Posts: 156	Re: Vintage Air Sale Justin, Sent the email. Let me know if I'm missing anything from the list. Thanks, Robert

07-08-2011, 10:36 AM	#89
raic65 Registered User Join Date: May 2011 Location: Bonita, Ca Posts: 156	Re: Vintage Air Sale Justin, Could you please resend the email. Thanks, Robert

07-08-2011, 12:04 PM	#91
raic65 Registered User Join Date: May 2011 Location: Bonita, Ca Posts: 156	Re: Vintage Air Sale Justin, Just checked and resent the email. Nothing in the Inbox or Junk mail folder. Hope this works. Thanks, RObert

10-09-2011, 01:52 PM	#93
EZ SPEED Registered User Join Date: May 2009 Location: Anniston, Alabama Posts: 164	Re: Vintage Air Sale I have PMed nd emailed weeks ago with no response. __________________ Eric 1967 C10 Small Window - LWB http://67-72chevytrucks.com/vboard/s...d.php?t=657509 2004 Silverado 2500HD - Turbo Diesel 603 rwhp / 1090 rwtq 2016 Camaro SS - Satin Pearl Nero wrap My 2010 Camaro SS Magazine feature (SOLD) http://www.superchevy.com/features/g...of-perfection/

10-09-2011, 09:22 PM	#94
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: Vintage Air Sale Can you resend your mess to my box and you can e-mail at justin@scottshotrods.com Jon no longer works for Scotts hotrods so to all please p/m or e-mail me at justin@scottshotrods.com scotts@scottshotrods.com sales@scottshotrods.com I will get back to all of you asap and thankyou for the buss Justin

10-12-2011, 10:07 PM	#95
IAFF2407 Registered User Join Date: Dec 2005 Location: White Rock Canada Posts: 865	Re: Vintage Air Sale 1972 Burb with factory air truck with rear air. Is the part number 944170? I have a cad 500 engine. I do have the Sandeen Comp and mount plate to the Edelbrock manifold. I would need the caddy connections to the compressor plus whatever is needed to hook up the rear air. I believe the part number that VA is for the truck, correct? please let me know asap as I need the firewall blocking plates now. thx, Al. __________________ 1972 GMC Sierra 1972 GMC Super Custom Suburban

10-13-2011, 07:17 AM	#96
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Vintage Air Sale Justin Any word on the new Gen 4 direct fit kit for the 60 to 66 trucks? I have a 65 and interested in going this route. Thanks Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

10-13-2011, 01:38 PM	#99
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Vintage Air Sale Justin are there any pictures or other information available on how this kit will look and fit up in the new kits? Very interested just need more information before I say yes I want one. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

10-13-2011, 02:59 PM	#100
yank Registered User Join Date: Jan 2001 Location: Meridian, Ms. Posts: 244	Re: Vintage Air Sale Justin looking to put A/C in my truck over the winter.Looking for a quote on SureFit kit 941171 with a R4 compressor bracket and a serpintine pulley compressor. Might go with the bulk head fitting since my firewall has been smoothed. Mike Palmiter __________________ 70 C/10 SWB Go ahead chance it........Columbus did!!! Steve (Chitlin) Bacon My DIY Shop http://s24.photobucket.com/albums/c47/mpalmiter/shop/



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.