KS Parting out Chevy C20 Cheyenne Custom Camper - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 11-28-2013, 04:08 PM

I got alot parted, I'm posting pics and the I'm off to Thanksgiving dinner

teeitup · 11-28-2013, 04:09 PM

15

Elliot949 · 11-28-2013, 05:25 PM

Quote:

Originally Posted by teeitup

Jamie, I had you first and posted pics on Mon but never heard back from you on it till today, but I will honor your first in line on antenna. Let me know on other parts so I can get you a total with shipping

Dan, $20 shipped for them

Thanks Randy

I will take them... if you want to just hang on to the Emblems and ship them all at once would be kewl...

Elliot949 · 11-29-2013, 10:44 AM

Quote:

Originally Posted by Elliot949

I will take them... if you want to just hang on to the Emblems and ship them all at once would be kewl...

Randy... Money is in the mails for the Paint divider... Dan

teeitup · 11-29-2013, 01:29 PM

Jamie, the mirrors were originally held on by lag bolts from factory, these were replaced with bolts and nuts, they were not original

Dan, I'll let you know when it gets here

Bob, pics of it posted on page 4 it is a 2208 carb, I've got Badpeanut ahead of you on it right now

Thanks Randy

badpeanut · 11-29-2013, 08:56 PM

Quote:

Originally Posted by teeitup

Bob, pics of it posted on page 4 it is a 2208 carb, I've got Badpeanut ahead of you on it right now

I'll take the carb. Sending PM...

teeitup · 11-29-2013, 09:15 PM

John and Wes, I will let you know when I get it in the mail, Thanks Randy

blackhawkip · 11-25-2013, 10:16 PM

That is a great deal on the slider with gasket and trim!

If you end up finding the lug wrench, jack or jack handle under the seat, let me know.

GLWS

timzrides · 11-25-2013, 10:33 PM

How about prices for the throttle and kick down brackets?

Thanks

timzrides · 11-25-2013, 10:38 PM

Also, prices for the pullies that you just posted in addition to brackets inquired about earlier...thanks again

70shortstep · 11-25-2013, 11:22 PM

Interested in front swaybar if it didn't sell

blackhawkip · 11-25-2013, 11:26 PM

Randy, thanks for letting me know on the jack handle and lug wrench. I'll take them. PM me payment info and price.

Thanks
-Jeff

**29od1** · 11-26-2013, 01:42 AM

Hi Randy,
I'll take the door panels and bottom fan shroud clips.
Thanks,
David

John Pasinski · 11-26-2013, 07:46 AM

I'll take the headliner (75.00). Accel assy (41.00).
Do you have another radio antenna to sell? How much for the mirrors?

duckdude · 11-26-2013, 09:59 AM

ill take Cheyenne emblems. how much for antenna that doesn't swivel? I also need the chrome piece that screws on behind the headlight nob, and the washer nob.

sduckworth13 · 11-26-2013, 10:00 AM

Randy, I'll take the roof section. I will be driving out and picking it up, let me know when is a good day. 913-314-6233

Dirt's72 · 11-26-2013, 12:00 PM

Randy,
I'd definately would like to get the floormat and brake pad cover. Like you I'm concerned about cracking. Please take your time on this. If you think there's a feasible way of getting it here in good shape without shipping being too bad let me know. Thanks, Derrick

SReddy · 11-26-2013, 11:26 PM

Thanks for the pics but I'll pass on the taillight lenses

Summi

Pmarti69 · 11-26-2013, 12:50 PM

Randy,
Flywheel cover shipped to 77345 if not spoken for yet

tallbob · 11-26-2013, 01:53 PM

Randy,
Let me know where I am at on the pulleys and what you are wanting$ Thanks, Bob

teeitup · 11-26-2013, 02:49 PM

duckdude, $15 plus shipping for stock one on the ground

Scott, sent you another pm about where you want it cut at

Derrick, I'll try folding it up and see what happens

PMarti69, $25 shipped for it

Bob, I just pm'd him to see, if no reply by tonight. I'll get with you

Thanks Randy

teeitup · 11-26-2013, 02:50 PM

Everyone I will get alll caught up with you all tonight hopefully.

Remember money orders only

Thanks Randy

teeitup · 11-26-2013, 10:47 PM

70shortstep, sway bar is yours, it will need new rubber bushings

duckdude, those items are yours, I'll get shipping quote Thurs or Fri

Dan, I will let you know when it gets here

70chevyBB, sorry this one is cracked

Thanks Randy

teeitup · 11-26-2013, 10:50 PM

Guys I only got an hour tonight parting, I won't have time tomorrow night, its my pool league night. I will try some Thanksgiving morning to get more stuff off and more pics. And then try to get some shipping quotes for you all. Again THANKS for your patience, Randy

Pmarti69 · 11-27-2013, 12:27 PM

Quote:

Originally Posted by teeitup

duckdude, $15 plus shipping for stock one on the ground

Scott, sent you another pm about where you want it cut at

Derrick, I'll try folding it up and see what happens

PMarti69, $25 shipped for it

Bob, I just pm'd him to see, if no reply by tonight. I'll get with you

Thanks Randy

Randy,

Ill take it. can PM your payment info.

Thanks

11-28-2013, 04:08 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting out Chevy C20 Cheyenne Custom Camper I got alot parted, I'm posting pics and the I'm off to Thanksgiving dinner Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-28-2013, 04:09 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting out Chevy C20 Cheyenne Custom Camper 15 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-29-2013, 01:29 PM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting out Chevy C20 Cheyenne Custom Camper Jamie, the mirrors were originally held on by lag bolts from factory, these were replaced with bolts and nuts, they were not original Dan, I'll let you know when it gets here Bob, pics of it posted on page 4 it is a 2208 carb, I've got Badpeanut ahead of you on it right now Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-29-2013, 09:15 PM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting out Chevy C20 Cheyenne Custom Camper John and Wes, I will let you know when I get it in the mail, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-25-2013, 10:16 PM	#8
blackhawkip Registered User Join Date: Dec 2011 Location: Fort Knox, KY Posts: 212	Re: Parting out Chevy C20 Cheyenne Custom Camper That is a great deal on the slider with gasket and trim! If you end up finding the lug wrench, jack or jack handle under the seat, let me know. GLWS __________________ 1972 Cheyenne Super K20 4wd 1972 Chevy Camaro Z28 1972 Cheyenne Super K30 (sold) 1972 Cheyenne Super Shortbed w/402bb (sold) 1972 Custom/Deluxe 2wd Suburban w/402bb (sold) plus too many others.....

11-25-2013, 10:33 PM	#9
timzrides Registered User Join Date: Jan 2007 Location: Illinois Posts: 351	Re: Parting out Chevy C20 Cheyenne Custom Camper How about prices for the throttle and kick down brackets? Thanks

11-25-2013, 10:38 PM	#10
timzrides Registered User Join Date: Jan 2007 Location: Illinois Posts: 351	Re: Parting out Chevy C20 Cheyenne Custom Camper Also, prices for the pullies that you just posted in addition to brackets inquired about earlier...thanks again

11-25-2013, 11:22 PM	#11
70shortstep Registerd User Join Date: Nov 2006 Location: Little Rock,AR Posts: 220	Re: Parting out Chevy C20 Cheyenne Custom Camper Interested in front swaybar if it didn't sell

11-25-2013, 11:26 PM	#12
blackhawkip Registered User Join Date: Dec 2011 Location: Fort Knox, KY Posts: 212	Re: Parting out Chevy C20 Cheyenne Custom Camper Randy, thanks for letting me know on the jack handle and lug wrench. I'll take them. PM me payment info and price. Thanks -Jeff __________________ 1972 Cheyenne Super K20 4wd 1972 Chevy Camaro Z28 1972 Cheyenne Super K30 (sold) 1972 Cheyenne Super Shortbed w/402bb (sold) 1972 Custom/Deluxe 2wd Suburban w/402bb (sold) plus too many others.....

11-26-2013, 01:42 AM	#13
29od1 Senior Member Join Date: Oct 2006 Location: Wichita, Kansas Posts: 1,050	Re: Parting out Chevy C20 Cheyenne Custom Camper Hi Randy, I'll take the door panels and bottom fan shroud clips. Thanks, David

11-26-2013, 07:46 AM	#14
John Pasinski Registered User Join Date: Aug 2007 Location: orlando Posts: 456	Re: Parting out Chevy C20 Cheyenne Custom Camper I'll take the headliner (75.00). Accel assy (41.00). Do you have another radio antenna to sell? How much for the mirrors? __________________ A man's thoughts devise his ways; but it's GOD that directs his steps.

11-26-2013, 09:59 AM	#15
duckdude Registered User Join Date: Jun 2011 Location: chillicothe mo Posts: 225	Re: Parting out Chevy C20 Cheyenne Custom Camper ill take Cheyenne emblems. how much for antenna that doesn't swivel? I also need the chrome piece that screws on behind the headlight nob, and the washer nob. Last edited by duckdude; 11-26-2013 at 12:48 PM.

11-26-2013, 10:00 AM	#16
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: Parting out Chevy C20 Cheyenne Custom Camper Randy, I'll take the roof section. I will be driving out and picking it up, let me know when is a good day. 913-314-6233 __________________ Scott

11-26-2013, 12:00 PM	#17
Dirt's72 Registered User Join Date: May 2013 Location: Albuquerque, NM Posts: 1,105	Re: Parting out Chevy C20 Cheyenne Custom Camper Randy, I'd definately would like to get the floormat and brake pad cover. Like you I'm concerned about cracking. Please take your time on this. If you think there's a feasible way of getting it here in good shape without shipping being too bad let me know. Thanks, Derrick

11-26-2013, 11:26 PM	#18
SReddy Registered User Join Date: Aug 2013 Location: Meridian, MS Posts: 7	Re: Parting out Chevy C20 Cheyenne Custom Camper Thanks for the pics but I'll pass on the taillight lenses Summi



Register or Log In To remove these advertisements.

11-26-2013, 12:50 PM	#19
Pmarti69 Registered User Join Date: Feb 2012 Location: North of Houston, Tx Posts: 346	Re: Parting out Chevy C20 Cheyenne Custom Camper Randy, Flywheel cover shipped to 77345 if not spoken for yet __________________ Houston Area Lawman 72 GMC Fleetside (AKA: MERLIN) ZZ4 Crate Engine TH400 with Stage two kit

11-26-2013, 01:53 PM	#20
tallbob Registered User Join Date: Aug 2013 Location: Greensburg,Pa Posts: 147	Re: Parting out Chevy C20 Cheyenne Custom Camper Randy, Let me know where I am at on the pulleys and what you are wanting$ Thanks, Bob

11-26-2013, 02:49 PM	#21
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting out Chevy C20 Cheyenne Custom Camper duckdude, $15 plus shipping for stock one on the ground Scott, sent you another pm about where you want it cut at Derrick, I'll try folding it up and see what happens PMarti69, $25 shipped for it Bob, I just pm'd him to see, if no reply by tonight. I'll get with you Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-26-2013, 02:50 PM	#22
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting out Chevy C20 Cheyenne Custom Camper Everyone I will get alll caught up with you all tonight hopefully. Remember money orders only Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-26-2013, 10:47 PM	#23
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting out Chevy C20 Cheyenne Custom Camper 70shortstep, sway bar is yours, it will need new rubber bushings duckdude, those items are yours, I'll get shipping quote Thurs or Fri Dan, I will let you know when it gets here 70chevyBB, sorry this one is cracked Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-26-2013, 10:50 PM	#24
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting out Chevy C20 Cheyenne Custom Camper Guys I only got an hour tonight parting, I won't have time tomorrow night, its my pool league night. I will try some Thanksgiving morning to get more stuff off and more pics. And then try to get some shipping quotes for you all. Again THANKS for your patience, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.